Which of the following correctly describes an adiabatic process?
- AA process that occurs at constant pressure
- BA process that occurs at constant volume
- CA process that occurs at constant temperature
- DA process in which no heat is exchanged between the system and surroundingsCorrect
Why D is right
An adiabatic process is one in which q = 0 (no heat transfer between the system and surroundings). In an adiabatic process, all energy changes come from work done on or by the system. The temperature of the system can change even though no heat flows.
Why the other 3 choices miss
- A
- Incorrect. A constant pressure process is called isobaric. While many calorimetry experiments occur at constant pressure, this does not define an adiabatic process.
- B
- Incorrect. A constant volume process is called isochoric (or isometric). The defining feature of an adiabatic process is no heat exchange, not constant volume.
- C
- Incorrect. A constant temperature process is called isothermal, not adiabatic. In an isothermal process, heat may be exchanged to maintain constant temperature.
A calorimeter contains 100.0 g of water (H2O) at 25.0∘C. A 50.0 g piece of metal at 100.0∘C is placed in the water, and the final equilibrium temperature is 28.5∘C. What is the specific heat capacity of the metal? (Specific heat of water =4.184 J/(g⋅∘C))
- A0.65 J/(g⋅∘C)
- B0.41 J/(g⋅∘C)Correct
- C0.39 J/(g⋅∘C)
- D0.52 J/(g⋅∘C)
Why B is right
Heat gained by water = heat lost by metal. qwater=mcΔT=100.0×4.184×(28.5−25.0)=100.0×4.184×3.5=1464.4 J. qmetal=mcΔT: 1464.4=50.0×c×(100.0−28.5)=50.0×c×71.5. c=35751464.4=0.41 J/(g⋅∘C).
Why the other 3 choices miss
- A
- Incorrect because 0.65 J/(g⋅∘C) is too high and would result from underestimating the temperature change ΔT of the metal or overestimating the heat gained by the water.
- C
- Incorrect because 0.39 J/(g⋅∘C) results from rounding errors or using an incorrect mass value in the calculation.
- D
- Incorrect because 0.52 J/(g⋅∘C) results from an arithmetic error in the temperature change ΔT calculation for either the water or the metal.
A 150.0 g sample of a metal at 95.0 ∘C is placed into 200.0 g of water at 20.0 ∘C. The final temperature is 25.5 ∘C. What is the specific heat of the metal? (Specific heat of water =4.18 J/(g⋅K))
- A0.240 J/(g⋅K)
- B0.890 J/(g⋅K)
- C0.440 J/(g⋅K)Correct
- D0.130 J/(g⋅K)
Why C is right
Heat lost by metal = heat gained by water. mmetal⋅cmetal⋅ΔTmetal=mwater⋅cwater⋅ΔTwater. 150.0⋅cmetal⋅(95.0−25.5)=200.0⋅4.18⋅(25.5−20.0). 150.0⋅cmetal⋅69.5=200.0⋅4.18⋅5.5. 10425⋅cmetal=4598. cmetal=4598/10425=0.441 J/(g⋅K), approximately 0.440 J/(g⋅K).
Why the other 3 choices miss
- A
- Incorrect. This value might result from an arithmetic error, such as using 150 g for water instead of 200 g.
- B
- Incorrect. This value is too high for most metals and approaches the specific heat of some nonmetals. It may result from swapping the temperature changes in the calculation.
- D
- Incorrect. This value is too low, corresponding to a metal like lead. It may result from using the wrong temperature difference or mass.