Skip to content
AP Environmental Science · Atmospheric, Aquatic, and Terrestrial Pollution

Air pollution

Air pollution appears in 20 reviewed AP Environmental Science questions and sits in Atmospheric, Aquatic, and Terrestrial Pollution. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Air pollution is tested

Example 1Harder
The chemistry of acid rain formation from nitrogen oxide emissions follows which reaction sequence?
  1. AN2 + O2 → NO (at high combustion temperatures) → NO2 → NOx + H2O → HNO3Correct
  2. BNO3- (nitrate ion) + H2O → HNO3 + OH- (base formation in rain)
  3. CNH3 + O3 → HNO3 + H2 (nitric acid forming directly from ammonia)
  4. DNO2 + H2O → HNO2 (nitrous acid) → further oxidation in sunlight → HNO3 (nitric acid)

Why A is right

The nitrogen oxide pathway to acid rain is: (1) Combustion at high temperatures (vehicles, power plants) reacts atmospheric N2 with O2: N2 + O2 → 2NO; (2) NO is oxidized in air: 2NO + O2 → 2NO2; (3) NO2 reacts with water vapor: 3NO2 + H2O → 2HNO3 + NO, or in simplified form: 4NO2 + 2H2O + O2 → 4HNO3. The resulting nitric acid (HNO3) dissolves in atmospheric moisture to form acid rain with pH as low as 4-5 (normal rain is ~5.6).
Why the other 3 choices miss
B
Nitrate ions (NO3-) in water create a slightly alkaline solution (conjugate base of strong acid HNO3), not acidic; acid rain forms from the dissolution of gaseous NOx compounds in atmospheric water droplets, not from ionic chemistry in ground-level water.
C
Ammonia (NH3) is a base that can actually neutralize acid rain; it does not react with ozone to form nitric acid; ammonia is released by livestock and fertilizers and can locally neutralize acid deposition rather than contributing to it.
D
While NO2 does react with water to form some nitrous acid (HNO2), the complete acid rain pathway involves multiple oxidation steps and the primary nitrogen-based acid in acid rain is nitric acid (HNO3), formed through the full NOx oxidation pathway described in option B.
Example 2Medium
Photochemical smog forms primarily in urban areas with heavy traffic and strong sunlight. Which chemical reaction sequence best describes its formation?
  1. ACarbon dioxide from power plants reacts with atmospheric moisture to form carbonic acid fog
  2. BNitrogen oxides and volatile organic compounds react in sunlight to form ozoneCorrect
  3. CSulfur dioxide from coal burning reacts with water vapor to form sulfuric acid droplets
  4. DParticulate matter from industrial smokestacks absorbs sunlight and heats the lower atmosphere

Why B is right

Photochemical smog formation begins when nitrogen oxides (NOx) from vehicle exhaust and volatile organic compounds (VOCs) from fuels, solvents, and vegetation react in the presence of ultraviolet sunlight. The photochemical reactions produce ground-level ozone (O3), peroxyacyl nitrates (PANs), and other oxidants that constitute the brown haze seen over cities like Los Angeles.
Why the other 3 choices miss
A
Incorrect. CO2 reacting with moisture to form carbonic acid is part of ocean acidification chemistry, not smog formation. CO2 does not contribute significantly to photochemical smog.
C
Incorrect. This describes industrial (London-type) smog or acid rain formation, not photochemical smog. Sulfur dioxide-based pollution is associated with coal burning, not the NOx/VOC/sunlight chemistry of photochemical smog.
D
Incorrect. While particulate matter is a component of urban air pollution, it does not form smog through sunlight absorption. Photochemical smog is a gas-phase chemical process involving NOx, VOCs, and UV radiation.
Example 3Medium
Thermal inversion is an atmospheric condition that traps pollutants near the ground. Under normal conditions, air temperature decreases with altitude, allowing warm polluted air to rise and disperse. During a thermal inversion, which condition prevents pollutant dispersal?
  1. ALow atmospheric pressure draws pollutants upward but holds them in a concentrated band at high altitude
  2. BHeavy rainfall washes pollutants out of the upper atmosphere and concentrates them at ground level
  3. CHigh winds at the surface blow pollutants horizontally but not vertically
  4. DA layer of warm air sits above cooler surface air, preventing vertical mixing and trapping pollutants at ground levelCorrect

Why D is right

During a thermal inversion, a layer of warm air (the inversion layer) sits above cooler air at the surface, reversing the normal temperature decrease with altitude. Because cool air is denser and cannot rise through the warm layer above, vertical mixing is suppressed and pollutants are trapped in the cooler surface layer. This can cause dangerous air quality events, as occurred in the Donora, Pennsylvania disaster (1948) and the London Great Smog (1952).
Why the other 3 choices miss
A
Incorrect. Low pressure typically promotes vertical mixing and dispersion of pollutants, not concentration. High pressure systems are more commonly associated with inversions and stagnant air conditions.
B
Incorrect. Rainfall actually helps clean the air by removing particulates and dissolved gases through wet deposition. Rain is not a cause of pollution concentration during inversions; rather, the lack of mixing and dispersion is the problem.
C
Incorrect. During inversions, both horizontal and vertical air movement is often reduced near the surface. The key mechanism is the temperature inversion preventing vertical mixing, not horizontal wind patterns.

Studied alongside

Other concepts from Atmospheric, Aquatic, and Terrestrial Pollution.