Artesian wells flow without pumping because water in a confined aquifer is under pressure from the weight of water at higher elevations. For an artesian system to function, which geological condition is required?
- AA confined aquifer between impermeable layers, recharged above the wellCorrect
- BA single unconfined aquifer with no impermeable barriers above or below it
- CVolcanic activity beneath the aquifer heating groundwater to create steam pressure
- DA surface lake at the same elevation connected to the well through an open channel
Why A is right
An artesian system requires a permeable aquifer (typically sandstone or gravel) sandwiched between impermeable confining layers (aquitards, typically clay or shale). The recharge zone (where water enters the aquifer) must be at a higher elevation than the well. Gravity creates hydrostatic pressure that forces water upward through the well without pumping, sometimes above the land surface (a flowing artesian well).
Why the other 3 choices miss
- B
- Incorrect. An unconfined aquifer (water table aquifer) does not create artesian pressure because there is no confining layer to contain the water under pressure. Water in unconfined aquifers must be pumped to the surface.
- C
- Incorrect. Artesian pressure comes from gravitational hydrostatic pressure (the weight of water at higher elevations), not from volcanic heating. Geothermally heated groundwater systems (hot springs, geysers) are different phenomena.
- D
- Incorrect. An artesian system requires a confined aquifer under pressure, not a surface connection. Open channels would create surface flow, not the pressurized groundwater flow characteristic of artesian systems.