Skip to content
AP Environmental Science · Land and Water Use

Water conservation

Water conservation appears in 4 reviewed AP Environmental Science questions and sits in Land and Water Use. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Water conservation is tested

Example 1Medium
Drip irrigation systems deliver water directly to plant roots through a network of tubes and emitters. Compared to flood irrigation, drip irrigation typically achieves water use efficiency of approximately:
  1. A30-40%, because significant water is lost through evaporation from exposed tubes
  2. B70-80%, a moderate improvement over flood irrigation's 50-60% efficiency
  3. C50-60%, similar to sprinkler systems but less than flood irrigation
  4. D90-95%, because water is delivered precisely where needed with minimal evaporation and runoff lossesCorrect

Why D is right

Drip irrigation achieves 90-95% water use efficiency because water is delivered directly to the root zone through emitters, minimizing evaporation, runoff, and deep percolation losses. This compares favorably with flood irrigation (40-50% efficiency) and sprinkler systems (65-75% efficiency). Drip systems also reduce weed growth and soil erosion.
Why the other 3 choices miss
A
Incorrect. 30-40% efficiency describes inefficient flood irrigation, not drip systems. Drip irrigation minimizes evaporation because water is applied at low pressure directly to the soil surface near roots.
B
Incorrect. While 70-80% would be a significant improvement, drip irrigation typically exceeds this range. Sprinkler systems achieve about 65-75% efficiency; drip systems are more efficient still.
C
Incorrect. 50-60% efficiency is characteristic of flood irrigation, which is the least efficient method. Drip irrigation is significantly more efficient than both flood and sprinkler systems.

Studied alongside

Other concepts from Land and Water Use.