A 500 kg elevator motor lifts the elevator at 2 m/s against gravity while also overcoming 1000 N of friction. What is the minimum power of the motor? (g = 10 m/s^2)
- A2,000 W
- B20,000 W
- C10,000 W
- D12,000 WCorrect
Why D is right
Total force needed = mg + f_friction = 500*10 + 1000 = 5000 + 1000 = 6000 N. Power = F*v = 6000*2 = 12,000 W. The result follows from conservation of energy or the work-energy relationship, so the change in kinetic or potential energy sets the answer.
Why the other 3 choices miss
- A
- Incorrect because 2000 W = friction force * velocity, ignoring the weight being lifted.
- B
- Incorrect because 20,000 W = mg*v + 10,000, overestimating the friction contribution.
- C
- Incorrect because 10,000 W = mg*v = 5000*2, ignoring the friction force.
A 10 kg block is dragged 5 m along a rough horizontal floor by a rope at 37∘ above horizontal with tension 60 N. Friction force is 30 N. What is the net work done on the block?
- A90 JCorrect
- B300 J
- C150 J
- D240 J
Why A is right
Work by tension =Tcos(37∘)d=60×0.8×5=240 J. Work by friction =−30×5=−150 J. Work by normal force =0 (perpendicular). Work by gravity =0 (horizontal surface). Net work =240−150=90 J.
Why the other 3 choices miss
- B
- Incorrect because 300 J=60×5 uses the full tension without the cos(37∘) factor for the angle.
- C
- Incorrect because 150 J is the magnitude of work done by friction alone, not the net work.
- D
- Incorrect because 240 J is the work done by the rope tension alone, without subtracting friction work.
A box is pushed 10 m up a 30∘ incline by a force of 100 N parallel to the incline. The box has a mass of 10 kg and the coefficient of kinetic friction is 0.2. What is the change in kinetic energy? Use g=10 m/s2.
- A500 J
- B173 J
- C327 JCorrect
- D0 J
Why C is right
Work by applied force: WF=100(10)=1000 J. Work by gravity: Wg=−mgsin(30∘)d=−10(10)(0.5)(10)=−500 J. Normal force: N=mgcos(30∘)=100(0.866)=86.6 N. Friction work: Wf=−μkNd=−0.2(86.6)(10)=−173.2 J. By the work-energy theorem: ΔKE=WF+Wg+Wf=1000−500−173=327 J.
Why the other 3 choices miss
- A
- Incorrect. This only subtracts gravity's work from the applied force (1000−500), ignoring friction entirely.
- B
- Incorrect. 173 J is the magnitude of the friction work, not the change in kinetic energy.
- D
- Incorrect. Zero change in KE would mean the box moves at constant velocity, which requires a specific balance of forces that does not hold here.