On this page · 5 sections
AP Physics 1 hands you graphs and data tables all the time, and it almost never wants you to read off one number. It wants you to know what the slope means, what the area means, and what shape the physics predicts. Section I gives you 42 multiple-choice questions in 85 minutes, which works out to about two minutes for each one. Many of those questions show a position-time or velocity-time graph, a force-time curve, or a short table of trial data. Each question has four choices, and a wrong answer costs you nothing beyond the missed point, so never leave a question blank.
In Section II, graphs show up most heavily in two places. Translation Between Representations (12 points) asks you to sketch or match graphs that fit a described situation. Experimental Design and Analysis (10 points) usually gives you a data table and asks you to plot it so the points fall on a straight line. Readers score the graph one point at a time. A typical split gives one point for axes labeled with quantities and units on a sensible scale, one for accurately plotted data, and one for a single best-fit line. The slope calculation is scored on its own. Because each point stands alone, a wrong slope does not erase the credit you earned for plotting.
The steps
- 1
Read the axes before the shape
Spend your first few seconds on the labels, not the curve. Name the quantity on each axis and its units. Then count what one gridline is worth, because a scale of 0.5 m/s per box is easy to misread as 1. Check whether the vertical axis starts at zero. Most important, check whether you are looking at position, velocity, or acceleration against time. A straight rising line means constant velocity on a position-time graph, but constant acceleration on a velocity-time graph. The same picture tells two different stories, and the label decides which one is true.
- 2
Ask what the slope means
The slope of any graph is the vertical quantity divided by the horizontal quantity, so its units tell you what it represents. On a position-time graph the slope is velocity, and on a velocity-time graph it is acceleration. On a momentum-time graph the slope is the net force, while on an angular momentum-time graph it is the net torque. On a graph of spring force against stretch, the slope is the spring constant k. For a curved graph, the slope at a single instant is the slope of the tangent line you draw at that point. Keep the height of a graph separate from its slope, because they are independent facts. A velocity-time graph can sit at a large positive velocity while its slope is zero, which means the object is moving quickly with no acceleration at all.
- 3
Ask what the area means
The area between a graph and the horizontal axis has units of vertical times horizontal. On a velocity-time graph, area is displacement. On an acceleration-time graph, area is the change in velocity. On a force-time graph, area is impulse, which equals the change in momentum when the force is the net force. On a force vs. position graph, area is the work done by that force. On a power-time graph, area is the energy transferred. Break odd shapes into rectangles and triangles, since a straight line from 7 m/s to 19 m/s over 6 s encloses a trapezoid of 78 m. Area below the axis counts as negative, so add it with its sign for displacement but ignore the sign if you want total distance.
- 4
Read the special features
Intercepts, zero crossings, and flat stretches carry most of the physics. A velocity-time graph crossing zero marks a turnaround, where the object stops for an instant and reverses. A flat section of a position-time graph means the object is at rest. Curvature matters too. A position-time graph that bends upward has a growing slope, so velocity is increasing and acceleration is positive. To decide speeding up or slowing down, compare signs. When velocity and acceleration have the same sign, speed increases, so a negative slope below the axis on a velocity-time graph means speeding up in the negative direction. Opposite signs mean slowing down.
- 5
Straighten the data before you graph it
Raw lab data rarely falls on a straight line, so your job is to choose new variables that make it straight. Start from the equation the physics predicts, then rearrange it into the form y = mx + b and match each piece. For a mass on a spring, T = 2π√(m/k) becomes T² = (4π²/k)m, so you plot T² against mass and the slope equals 4π²/k. A simple pendulum follows the same pattern, since plotting T² against length gives a slope of 4π²/g. For an object dropped from rest, v² = 2gh, so a graph of v² against height has a slope of 2g. In a liquid, absolute pressure plotted against depth has a slope of ρg, and the vertical intercept is the atmospheric pressure acting on the surface. Write the rearranged equation beside your graph, because it shows the reader exactly why you expect a straight line and what the slope stands for.
- 6
Take the slope from your line, not your table
Draw one straight line that balances the scatter, with roughly as many points above it as below it. Do not connect the dots, and do not force the line through the origin when the data clearly misses it. To find the slope, pick two points that sit exactly on your line and are far apart from each other, then mark them so the reader can see them. Points that are close together magnify every small reading error in the calculation. You may use an actual data point only if your line passes right through it. Show the rise, the run, and the units, for example (0.98 − 0.19) s² divided by (0.50 − 0.10) kg. Then set that slope equal to the expression from your rearranged equation and solve it for the quantity the question asks you to find.
- 7
Check the answer against the physics
Before you move on, ask whether your number makes physical sense. A spring constant must be positive, and a free-fall slope of 2g should come out close to 20 m/s². Look at the intercept as well as the slope. If the physics predicts a line through the origin but yours crosses the vertical axis at a clear positive value, something in the setup added a constant to every measurement. Friction, the mass of a hanger, or a sensor that does not read zero at the start can all cause this kind of offset. Follow-up parts often ask exactly this question, and naming a specific cause tied to your own graph earns more credit than a vague phrase like "human error".
Worked through
The setup: a student hangs a mass from a vertical spring, pulls it down, releases it, and times one full oscillation, because she wants to find the spring constant k. She repeats the trial for five different masses, from 0.10 kg up to 0.50 kg in steps of 0.10 kg. The measured periods, in that same order, are 0.45 s, 0.62 s, 0.77 s, 0.89 s, and 0.99 s.
First, choose what to plot. A graph of period against mass would curve, because the period grows with the square root of the mass. The model on your equation sheet is T = 2π√(m/k), and squaring both sides gives T² = (4π²/k)m. That equation has the form y = mx, with T² playing the role of y and mass playing the role of x. So you plot T² on the vertical axis and m on the horizontal axis, and you expect a straight line through the origin whose slope is 4π²/k.
Next, build a new column in the data table by squaring each measured period. Rounded to two decimal places for plotting, the squared periods are 0.20, 0.38, 0.59, 0.79, and 0.98 s², and they should grow by roughly equal amounts if the model is right.
Then set up the axes. Label the vertical axis "T² (s²)" and the horizontal axis "m (kg)", so a reader knows both the quantity and the unit. Use 0.1 s² per major gridline up to 1.0 and 0.1 kg per gridline up to 0.5, because that spreads the data across most of the grid. Plot all five points with care, since a misplaced point can cost its own credit.
Now draw the best-fit line. The points lie close to a straight line, with small scatter on both sides of the trend. Draw a single ruler line that balances them rather than joining them dot to dot. Suppose your line passes through (0.10 kg, 0.19 s²) and (0.50 kg, 0.98 s²), which are far apart and both lie on the line itself, so you mark them clearly.
Calculate the slope from those two points on the line. The rise is 0.79 s², found by subtracting 0.19 from 0.98, and the run is 0.40 kg, found by subtracting 0.10 from 0.50. Dividing the rise by the run gives a slope of about 1.98 s²/kg, and you should always write the units next to it.
Connect the slope back to the physics. Because the slope equals 4π²/k, you can rearrange the relationship so that k equals 4π² divided by the slope. Dividing 39.5 by 1.98 gives a spring constant of about 20 N/m.
Finally, check the result. A 20 N/m spring stretches about 5 cm under a 1 N load, which is a reasonable value for a lab spring. If you extend the line back to m = 0, it crosses at about −0.01 s², which is zero within the scatter of the data. That matches the model, since a spring with no mass on it has nothing to oscillate. If the line had crossed well above zero, a likely cause would be the mass of the spring itself, which moves along with the hanging mass and adds to the effective mass.
This answer earns full credit for clear reasons. The axes carry quantities and units, and the scale is even and fills most of the grid. The line is fitted to the trend instead of drawn dot to dot. The slope comes from two far-apart points on that line, and the last step names the equation that links the slope to k, so the reader can follow every move.
Common mistakes
Reading the height of a graph when the question is really about its slope. A velocity-time graph that is high but flat means zero acceleration, and a negative slope while the velocity is also negative means the object is speeding up, not slowing down.
Treating a position-time graph as a picture of the path the object follows. A line that rises and then falls shows the object moving away from the origin and coming back along a straight track, not climbing over a hill.
Calculating the slope from two table values that do not sit on your best-fit line, or connecting the dots instead of drawing a single fitted line. Readers reward a slope taken from the line itself, using two points that are far apart.
Plotting the raw variables that produce a curve, such as period against mass, and then trying to read a slope from that curve. Rearrange the equation first so that the graph you expect is a straight line.
Reporting the slope itself as the final answer. On a graph of period squared against mass, the slope equals 4π²/k rather than k, so you still have to solve for the quantity the question actually asks about.
Leaving the axes without quantities and units, using an uneven scale, or squeezing all the data into one corner of the grid. Each of these habits can cost a separate plotting point on the free-response section.
Checklist
- I read both axis labels, the units, and the value of one gridline before I look at the shape.
- I can state what the slope and the area mean for position-time, velocity-time, acceleration-time, force-time, and force-position graphs.
- I can tell from the signs of velocity and acceleration whether an object is speeding up or slowing down.
- I can rearrange an equation like T = 2π√(m/k) into y = mx + b and say what to plot on each axis.
- I draw one best-fit line that balances the scatter, instead of connecting the dots or forcing it through the origin.
- I take my slope from two far-apart points on my line, and I show the rise, the run, and the units.
- I turn the slope into the physical quantity the question asks for, and I check that the result has a sensible size and sign.
- I can explain what a nonzero intercept means and name a real cause for it.