Skip to content
SAT · Geometry and Trigonometry

Cone

Cone appears in 5 reviewed SAT questions and sits in Geometry and Trigonometry. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Cone is tested

Example 1Medium
A cone has a radius of 6 and a height of 9. What is the volume of the cone? (Use pi ≈ 3.14 and the formula V = (1/3)pi*r^2*h)
  1. A1,017.36
  2. B508.68
  3. C169.56
  4. D339.12Correct

Why D is right

V = (1/3) × 3.14 × 36 × 9 = (1/3) × 3.14 × 324 = (1/3) × 1017.36 = 339.12. The geometry or trigonometry follows directly from the given measurements and relationships.
Why the other 3 choices miss
A
Incorrect: This is the volume of the full cylinder (pi × r^2 × h), without the 1/3 factor.
B
Incorrect: This results from computing (1/2) × 3.14 × 36 × 9, using 1/2 instead of 1/3.
C
Incorrect: This results from computing (1/3) × 3.14 × 6 × 9 = 169.56, forgetting to square the radius.
Example 2Medium
A cylinder and a cone both have the same radius (r = 4) and height (h = 9). What is the ratio of the volume of the cylinder to the volume of the cone?
  1. A9:1
  2. B1:3
  3. C3:1Correct
  4. D1:9

Why C is right

V_cylinder = pi × r^2 × h. V_cone = (1/3) × pi × r^2 × h. Ratio = 1 : (1/3) = 3:1. The geometry or trigonometry follows directly from the given measurements and relationships.
Why the other 3 choices miss
A
Incorrect: 9:1 confuses the height value (9) with the volume ratio.
B
Incorrect: 1:3 is the ratio of cone to cylinder, not cylinder to cone.
D
Incorrect: 1:9 would apply if the height differed by a factor of 9, but here h is the same.
Example 3Harder
A frustum (truncated cone) is formed by cutting off the top of a cone. The original cone has height 12 and base radius 6. It is cut at height 8 from the base, leaving the top with radius r. What is r?
  1. A2Correct
  2. B1
  3. C4
  4. D3

Why A is right

The cone tapers linearly. At height 12, radius = 6. At height 0, radius = 0. At height h from base, radius = 6(1 - h/12). At cut height 8 from base, radius = 6(1 - 8/12) = 6(1/3) = 2.
Why the other 3 choices miss
B
Incorrect: r = 1 would correspond to a cut at h = 10 (r = 6 × 2/12 = 1).
C
Incorrect: r = 4 corresponds to h = 4: 6(1 - 4/12) = 6(2/3) = 4.
D
Incorrect: r = 3 corresponds to h = 6 (halfway): 6(1 - 6/12) = 3.

Studied alongside

Other concepts from Geometry and Trigonometry.