On this page · 5 sections
The SAT Math section has 44 questions split into two modules of 22, and each module gets 35 minutes. That works out to about 95 seconds per question. You take it in the Bluebook app, and a Desmos graphing calculator is built in for every question, along with a reference sheet of area, volume and triangle formulas.
The questions come from four content areas. Algebra (linear equations, inequalities, systems and linear functions) and Advanced Math (quadratics, exponentials, polynomials, function notation and equivalent expressions) each make up about 35% of the section. Problem Solving and Data Analysis (ratios, percents, units, statistics and probability) and Geometry and Trigonometry (area, volume, angles, right triangles, circles and basic trig) each make up about 15%.
About three quarters of the questions are multiple choice with four options. The rest are student-produced response questions, where you type your own answer into a box. Those have strict entry rules, covered in the steps below.
The section is adaptive at the module level. Module 1 is a mix of easy, medium and hard questions. How well you do on it decides whether module 2 is the easier or the harder version, and the top of the score range is only reachable through the harder version. So module 1 accuracy matters more than speed.
You get a scaled score from 200 to 800. Each module includes two unscored trial questions that look exactly like the others, so 40 of the 44 count. Scoring accounts for question difficulty rather than adding up a simple raw count. Wrong answers cost nothing, so a blank answer is always a wasted chance.
The steps
- 1
1. Set a pace before you start
Divide the 35 minutes into checkpoints. Aim to finish question 11 with about 17 minutes left, and question 22 with 3 to 5 minutes left for review. Questions get harder as the module goes on, so the early ones should take well under 95 seconds. That gives the late ones room. The timer is on screen, but glance at it only at your checkpoints, because watching it every question costs focus.
- 2
2. Read the last line first
Before you touch the numbers, find exactly what the question asks for. Many stems ask for something other than x, such as 2x + 1, the value of k, the y-intercept, or the number of solutions. Underline it mentally, then read the setup. This one habit catches the most common trap on the section, where a wrong choice is the right answer to a different question, like the value of x when the stem asked for 3x.
- 3
3. Pick the fastest tool, not the most elegant one
Most questions have more than one route: solve it by hand, graph it in Desmos, or, on multiple-choice questions, work backward from the choices. Student-produced response questions have no choices, so only the first two routes apply to them. Solve by hand when the algebra is one or two lines. Use Desmos when you see a system, a quadratic, an intersection, or an equation that is messy to rearrange. Plug in the answer choices when the question asks which value works, starting with a middle value so you can tell whether to go up or down. When the choices are expressions with variables, pick simple numbers for the variables, such as x = 2, and test which choice matches.
- 4
4. Use Desmos for what it does best
Type both sides of an equation as separate lines, and the x-coordinate where the graphs cross is the solution. Click a parabola to see its vertex and x-intercepts at once. When a question says a constant like k makes something true, type the equation with k and Desmos offers a slider, so you can drag k and watch for one intersection, no intersection, or a tangent touch. Desmos also handles tables and lines of best fit. If you can type the equation faster than you can solve it, use the calculator.
- 5
5. Mark and move at two minutes
If a question is still stuck after about two minutes, pick the choice that looks most likely, flag it with Mark for Review, and move on. Every question you never reach scores zero. Four minutes on one hard question can cost you two or three easier ones later in the module, and those count too. The review page at the end of the module shows every flagged and unanswered question, so you can jump straight back to them.
- 6
6. Check the answer against the question and the entry rules
Reread the last line and confirm your number answers it, including units, sign and form. For student-produced responses, follow the entry rules. A positive answer can use up to 5 characters and a negative answer up to 6, counting the minus sign. Enter a fraction or a decimal, but never a mixed number, so 2 1/4 goes in as 9/4 or 2.25. If a decimal runs long, fill every available character: for 5/6, enter 5/6, .8333 or 0.833, but not 0.83 or .83. Leave out commas, dollar signs and percent signs. If more than one answer works, enter just one.
- 7
7. Spend the final minutes on flagged questions, then fill every blank
With 3 to 5 minutes left, open the review page. Go back to the flagged questions you were closest to solving, not the hardest ones. With one minute left, make sure every question has an answer. For a blank student-produced response, a reasonable estimate is better than nothing. Once a module ends, you cannot return to it, so finish everything before the timer runs out.
Worked through
Three questions from one module, worked start to finish with the steps above. Each is the kind of question you will see, written fresh for this guide.
Question A (early in the module, multiple choice). If 4x − 7 = 13, what is the value of 2x?
Read the last line first: the question wants 2x, not x. Solve by hand, because it is two lines. Add 7 to both sides to get 4x = 20, so x = 5. Then 2x = 10. The trap choice is 5, the value of x. Time spent: about 30 seconds, which banks time for later.
Question B (middle of the module, student-produced response). The function f(x) = x² − 6x + c has exactly one x-intercept. What is the value of c?
Read the last line: you need a number for c. One x-intercept means the parabola just touches the x-axis at its vertex. There are two fast routes.
By hand: a quadratic has exactly one real root when its discriminant b² − 4ac equals zero. Here a = 1, b = −6 and the constant is c, so 36 − 4c = 0, which gives c = 9.
With Desmos: type y = x² − 6x + c and accept the slider for c. Drag c until the vertex sits right on the x-axis, which happens at c = 9. You can also check that x² − 6x + 9 = (x − 3)², a perfect square that touches the axis only at x = 3.
Enter 9. Time spent: about 60 seconds.
Question C (late in the module, student-produced response). In the system below, k is a constant. For what value of k does the system have no solution? 3x + 2y = 12 6x + ky = 20
Read the last line: you need k, and no solution means the two lines are parallel but not the same line. Parallel lines have the same ratio of x-coefficient to y-coefficient. The x-coefficient doubles from 3 to 6, so the y-coefficient must also double, from 2 to 4. That makes k = 4.
Now check that the lines are not identical. Doubling the whole first equation gives 6x + 4y = 24, but the second equation is 6x + 4y = 20. Same left side, different right side, so the lines never meet. If the right side had been 24, the system would have infinitely many solutions instead, which is a separate question type you will also see.
Desmos check: graph 3x + 2y = 12 and 6x + ky = 20 with a slider for k. At k = 4 the lines run parallel.
Enter 4. Time spent: about 80 seconds.
One entry-rule example to finish. Suppose a question solves to 3x/4 = 5 − x. Multiply both sides by 4 to get 3x = 20 − 4x, so 7x = 20 and x = 20/7. Enter 20/7, or the decimal 2.857, which fills all 5 characters. Entering 2.86 is marked wrong because it drops a digit you had room for.
The pattern across all three: you read what was asked before solving, chose the quickest tool for each question, and checked the answer against the stem. Together they took under three minutes, which leaves extra time for the hardest questions at the end of the module.
Common mistakes
Answering a different question than the one asked. You solve for x when the stem wants 2x, k, the y-intercept, or the number of solutions, and the wrong value is waiting among the choices.
Treating a 20% increase followed by a 20% decrease as no change. Multiply instead: 1.20 × 0.80 = 0.96, so the result is a 4% decrease. Percent changes stack by multiplying, not by adding.
Breaking the student-produced response rules. Mixed numbers like 2 1/4 are not accepted, and a shortened decimal such as 0.83 for 5/6 is marked wrong because it does not fill every character you had. Percent signs, dollar signs and commas also cause problems.
Rushing module 1 to save time. Errors on easy and medium questions in module 1 can send you to the easier module 2, which lowers the highest score you can reach.
Spending four or five minutes on one hard question. That time can cost you two or three easier questions at the end of the module that you never reach, and every unanswered question scores zero.
Solving long algebra by hand when Desmos would do it in seconds, or leaving a question blank when there is no penalty for a wrong answer.
Checklist
- I can say how many questions and minutes each Math module has, and my time checkpoint for question 11.
- I read the last line of every question before working, and I can name the quantity it asks for.
- I can solve a system of two equations in Desmos by graphing both and reading the intersection.
- I can use a Desmos slider to find a constant that gives one solution, no solution, or a tangent touch.
- I know when to work backward from the answer choices and when to pick numbers for the variables.
- I can enter fractions and long decimals in a student-produced response without breaking the rules, including negative answers.
- I flag and move on after about two minutes, and I come back to flagged questions with time left.
- I never leave a question blank when a module ends.