Skip to content
ACT · Science

Calorimetry

Calorimetry appears in 9 reviewed ACT questions and sits in Science. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Calorimetry is tested

Example 1Harder
Students conducted a calorimetry experiment to determine the specific heat capacity of three unknown metals. Each 50 g metal sample was heated to 100°C and then dropped into 200 g of water at 20°C in an insulated calorimeter. Final temperature of water recorded. Results: Metal X: final temp = 24.8°C. Metal Y: final temp = 28.3°C. Metal Z: final temp = 22.1°C. Specific heat of water = 4.18 J/(g·°C). Heat gained by water for Metal Y = mass × Cp,water × ΔT = 200 × 4.18 × (28.3 − 20) = 6,939 J. Assuming no heat loss, what is the specific heat capacity of Metal Y?
  1. A0.190 J/(g·°C)
  2. B1.89 J/(g·°C)Correct
  3. C3.47 J/(g·°C)
  4. D0.347 J/(g·°C)

Why B is right

By conservation of energy, heat lost by the metal equals heat gained by the water: Q = 6,939 J. Metal Y cools from 100°C to the final temperature 28.3°C, so its temperature change is ΔT = 100 − 28.3 = 71.7°C. The metal mass is 50 g. Specific heat capacity = Q / (m × ΔT) = 6,939 / (50 × 71.7) = 6,939 / 3,585 ≈ 1.89 J/(g·°C), which is choice B.
Why the other 3 choices miss
A
Incorrect because 0.190 J/(g·°C) corresponds to gold or lead, which would cause a much smaller temperature change in the water.
C
Incorrect because 3.47 J/(g·°C) is higher than most metals and would require a much larger temperature rise in the water.
D
Incorrect because 0.347 J/(g·°C) is close to copper's specific heat, which would result in a smaller final water temperature than observed.
Example 2Medium
A student measured the temperature change (ΔT, °C) when 5.0 g samples of five different compounds were dissolved in 50.0 mL of water (at 25°C). Some compounds release heat (exothermic, ΔT positive) and some absorb heat (endothermic, ΔT negative). Results: NaOH: ΔT = +12.4°C. KNO₃: ΔT = −3.2°C. NH₄Cl: ΔT = −5.1°C. CaCl₂: ΔT = +8.3°C. NaCl: ΔT = −0.2°C. Which compound's dissolution process has the most favorable (most negative) enthalpy of solution?
  1. ANH₄Cl
  2. BCaCl₂
  3. CKNO₃
  4. DNaOHCorrect

Why D is right

The most favorable (most negative, most exothermic) enthalpy of solution corresponds to the largest temperature increase in the water. NaOH shows the largest ΔT = +12.4°C, indicating the most heat was released, corresponding to the most negative (most exothermic) ΔH_solution. Endothermic compounds (KNO₃, NH₄Cl, NaCl) absorb heat and have positive ΔH_solution.
Why the other 3 choices miss
A
Incorrect because NH₄Cl has ΔT = −5.1°C (endothermic, positive ΔH), meaning dissolution absorbs heat — the opposite of a favorable (negative) enthalpy.
B
Incorrect because CaCl₂ shows ΔT = +8.3°C (exothermic), but NaOH shows ΔT = +12.4°C — a more negative ΔH.
C
Incorrect because KNO₃ shows ΔT = −3.2°C (endothermic), indicating an unfavorable (positive) enthalpy of dissolution.
Example 3Medium
A student compared the specific heat capacities of four metals and used the data to explain everyday observations. Specific heat capacity (J/g·°C): Aluminum = 0.902. Copper = 0.385. Iron = 0.449. Gold = 0.129. The student heated 100 g samples of each metal in boiling water (100°C) and then placed them on an ice block (at 0°C). The amount of ice melted was measured. Heat of fusion of ice = 334 J/g. If each metal starts at 100°C and ends at 0°C, which metal would melt the most ice?
  1. AAluminumCorrect
  2. BCopper
  3. CIron
  4. DGold

Why A is right

Heat transferred = m × Cp × ΔT = 100 g × Cp × (100 − 0°C) = 100 × Cp × 100. Aluminum: Q = 100 × 0.902 × 100 = 9,020 J. Copper: Q = 100 × 0.385 × 100 = 3,850 J. Iron: Q = 100 × 0.449 × 100 = 4,490 J. Gold: Q = 100 × 0.129 × 100 = 1,290 J. Mass of ice melted = Q/334 J/g: Aluminum = 9,020/334 = 27.0 g. Copper = 11.5 g. Iron = 13.4 g. Gold = 3.9 g. Aluminum melts the most ice.
Why the other 3 choices miss
B
Incorrect because copper stores 3,850 J and melts 11.5 g of ice — less than aluminum (9,020 J, 27.0 g).
C
Incorrect because iron stores 4,490 J and melts 13.4 g of ice — less than aluminum's 27.0 g.
D
Incorrect because gold has the lowest specific heat (0.129 J/g·°C), so it stores the least energy per gram and melts the least ice (3.9 g).

Studied alongside

Other concepts from Science.