Skip to content
ACT · Science

Colligative properties

Colligative properties appears in 3 reviewed ACT questions and sits in Science. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Colligative properties is tested

Example 1Medium
Experiment 10: A student tested how the concentration of salt (NaCl) in a solution affects the boiling point, a phenomenon known as boiling point elevation. The student measured the boiling point of water with different amounts of dissolved NaCl. NaCl Concentration (mol/L) | Boiling Point (°C) 0.0 | 100.0 0.5 | 100.5 1.0 | 101.0 1.5 | 101.5 2.0 | 102.0 2.5 | 102.5 A chef wants to boil water at exactly 101.8°C. What NaCl concentration should be used, based on the data?
  1. A1.5 mol/L
  2. B1.8 mol/LCorrect
  3. C2.5 mol/L
  4. D2.0 mol/L

Why B is right

The data show a perfectly linear relationship: boiling point increases by 0.5°C per 0.5 mol/L of NaCl, or equivalently 1.0°C per 1.0 mol/L. To achieve 101.8°C (1.8°C above 100°C), a concentration of 1.8 mol/L is required.
Why the other 3 choices miss
A
Incorrect because 1.5 mol/L produces a boiling point of 101.5°C, which is 0.3°C below the desired 101.8°C.
C
Incorrect because 2.5 mol/L produces a boiling point of 102.5°C, which is 0.7°C above the target temperature.
D
Incorrect because 2.0 mol/L produces a boiling point of 102.0°C, which is 0.2°C above the desired 101.8°C.
Example 2Harder
Experiment 6: A student measured the freezing point of water containing different concentrations of three solutes, testing colligative properties: Concentration (mol/L) | Glucose ΔTf (°C) | NaCl ΔTf (°C) | CaCl2 ΔTf (°C) 0.1 | -0.186 | -0.372 | -0.558 0.2 | -0.372 | -0.744 | -1.116 0.5 | -0.930 | -1.860 | -2.790 1.0 | -1.860 | -3.720 | -5.580 Note: ΔTf = -Kf × m × i, where Kf = 1.86 °C/m for water and i = van't Hoff factor (particles per formula unit). Based on the data, what is the van't Hoff factor for CaCl2?
  1. A4
  2. B3Correct
  3. C1
  4. D2

Why B is right

For glucose (non-electrolyte), ΔTf at 1.0 mol/L = -1.860°C, and i = 1.860 / (1.86 × 1.0) = 1. For NaCl, ΔTf = -3.720°C, so i = 3.720 / 1.860 = 2. For CaCl2, ΔTf = -5.580°C, so i = 5.580 / 1.860 = 3. CaCl2 dissociates into Ca²⁺ + 2Cl⁻ = 3 particles, confirming i = 3.
Why the other 3 choices miss
A
Incorrect because i = 4 would give ΔTf = -4 × 1.86 × 1.0 = -7.44°C at 1.0 mol/L; the data show -5.58°C, consistent with i = 3.
C
Incorrect because i = 1 corresponds to glucose (non-dissociating); CaCl2 clearly dissociates into multiple ions, shown by its much larger freezing point depression.
D
Incorrect because i = 2 corresponds to NaCl (Na⁺ + Cl⁻); CaCl2 dissociates into 3 particles (Ca²⁺ + 2Cl⁻), giving a proportionally larger depression.
Example 3Harder
A chemist investigated the colligative property of boiling point elevation. Five solutions were prepared using 1.0 mol of different solutes dissolved in 1.0 kg of water (Kb = 0.512°C/m for water). Boiling point elevation (ΔTb) = Kb × m × i, where i is the van't Hoff factor. Predicted and observed ΔTb: Glucose (non-electrolyte, i=1): predicted = 0.512°C, observed = 0.510°C. NaCl (i=2): predicted = 1.024°C, observed = 0.976°C. CaCl₂ (i=3): predicted = 1.536°C, observed = 1.437°C. AlCl₃ (i=4): predicted = 2.048°C, observed = 1.831°C. K₂SO₄ (i=3): predicted = 1.536°C, observed = 1.430°C. Why do observed values consistently fall below predicted values for electrolyte solutions?
  1. AIon-ion interactions in concentrated electrolyte solutions reduce the effective number of independent particles.Correct
  2. BThe Kb value for water is inaccurate for solutions with dissolved ions.
  3. CElectrolytes partially decompose near the boiling point of water, releasing fewer dissolved particles than their formulas predict.
  4. DElectrolytes evaporate more readily, reducing their effective concentration.

Why A is right

In real electrolyte solutions, cations and anions attract each other, forming ion pairs that behave as single particles rather than two or more independent particles. This reduces the effective van't Hoff factor below the theoretical value. For example, NaCl theoretically gives i = 2 (Na⁺ + Cl⁻), but observed ΔTb suggests an effective i ≈ 1.905. This phenomenon is described by the Debye-Hückel theory.
Why the other 3 choices miss
B
Incorrect because Kb is a property of the solvent (water) and is accurate for non-electrolyte solutions like glucose, as confirmed by the near-perfect match between predicted and observed glucose values.
C
Incorrect because common ionic compounds (NaCl, CaCl₂) do not decompose at the temperatures involved (100°C range); they are thermally stable in dilute aqueous solution.
D
Incorrect because electrolytes are ionic and non-volatile; they do not evaporate from solution, so this cannot explain the reduced ΔTb.

Studied alongside

Other concepts from Science.