Skip to content
ACT · Science

Electrolytes

Electrolytes appears in 3 reviewed ACT questions and sits in Science. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Electrolytes is tested

Example 1Medium
Table 3 shows properties of solutions used in a chemistry lab: Solution | Solute | Concentration (mol/L) | pH | Electrical Conductivity Solution 1 | HCl | 0.1 | 1.0 | High Solution 2 | CH3COOH | 0.1 | 2.9 | Moderate Solution 3 | NaCl | 0.1 | 7.0 | High Solution 4 | Sucrose | 0.1 | 7.0 | None Solution 5 | NaOH | 0.1 | 13.0 | High Based on the data, what characteristic distinguishes strong electrolytes (high conductivity) from non-electrolytes (no conductivity)?
  1. AStrong electrolytes are always acids, while non-electrolytes are always neutral compounds.
  2. BStrong electrolytes have high molecular weight; non-electrolytes have low molecular weight.
  3. CStrong electrolytes have pH values below 7, while non-electrolytes have neutral pH.
  4. DStrong electrolytes dissociate fully into ions in solution; non-electrolytes do not produce ions.Correct

Why D is right

Solutions 1 (HCl), 3 (NaCl), and 5 (NaOH) all have high conductivity — they fully dissociate into ions. Sucrose (Solution 4) has no conductivity because it does not dissociate into ions in water. Acetic acid (Solution 2) has moderate conductivity because it partially dissociates. Ion formation, not pH, determines conductivity.
Why the other 3 choices miss
A
Incorrect because NaCl and NaOH are not acids but are strong electrolytes; HCl is an acid and also a strong electrolyte, but acidity alone does not define this category.
B
Incorrect because sucrose has a higher molecular weight than NaCl or HCl but is a non-electrolyte; molecular weight is not the distinguishing factor.
C
Incorrect because NaCl (Solution 3) and NaOH (Solution 5) are strong electrolytes with pH 7 and 13, respectively — high conductivity is not limited to acidic solutions.
Example 2Easier
A student tested five household substances for their conductivity using a simple circuit with an LED indicator. Conductivity was rated 0 (no light) to 3 (bright light). Results: Distilled water: conductivity = 0, pH = 7.0. Tap water: conductivity = 1, pH = 7.2. Vinegar: conductivity = 1, pH = 2.9. Baking soda solution: conductivity = 2, pH = 8.3. Salt water (0.1 M NaCl): conductivity = 3, pH = 7.0. Which property of a substance is most directly responsible for its electrical conductivity in aqueous solution?
  1. ATemperature — warmer solutions always conduct electricity better.
  2. BConcentration of dissolved ions — ionizing substances produce charge carriers.Correct
  3. CViscosity — less viscous solutions allow electrons to flow more freely between the electrodes.
  4. DpH level — acidic solutions conduct electricity better than neutral or basic solutions.

Why B is right

Salt water (0.1 M NaCl) has the highest conductivity (3) because NaCl fully dissociates into Na⁺ and Cl⁻ ions. Baking soda solution (2) partly ionizes in water. Tap water (1) has dissolved mineral ions from pipes. Distilled water (0) has no dissolved ions. Vinegar (1) partially ionizes (acetic acid is a weak acid). Conductivity is directly proportional to ion concentration, not pH.
Why the other 3 choices miss
A
Incorrect because temperature was not varied in this experiment; all solutions were tested under the same conditions, and conductivity differences are due to ion concentration.
C
Incorrect because electrical conductivity in aqueous solutions is due to ion movement, not electron flow; water is a poor electron conductor but an excellent ionic conductor when dissolved ions are present.
D
Incorrect because vinegar (pH 2.9, acidic) has the same conductivity as tap water (pH 7.2); salt water (pH 7.0, neutral) has the highest conductivity. pH alone does not determine conductivity.
Example 3Harder
A chemist investigated the colligative property of boiling point elevation. Five solutions were prepared using 1.0 mol of different solutes dissolved in 1.0 kg of water (Kb = 0.512°C/m for water). Boiling point elevation (ΔTb) = Kb × m × i, where i is the van't Hoff factor. Predicted and observed ΔTb: Glucose (non-electrolyte, i=1): predicted = 0.512°C, observed = 0.510°C. NaCl (i=2): predicted = 1.024°C, observed = 0.976°C. CaCl₂ (i=3): predicted = 1.536°C, observed = 1.437°C. AlCl₃ (i=4): predicted = 2.048°C, observed = 1.831°C. K₂SO₄ (i=3): predicted = 1.536°C, observed = 1.430°C. Why do observed values consistently fall below predicted values for electrolyte solutions?
  1. AIon-ion interactions in concentrated electrolyte solutions reduce the effective number of independent particles.Correct
  2. BThe Kb value for water is inaccurate for solutions with dissolved ions.
  3. CElectrolytes partially decompose near the boiling point of water, releasing fewer dissolved particles than their formulas predict.
  4. DElectrolytes evaporate more readily, reducing their effective concentration.

Why A is right

In real electrolyte solutions, cations and anions attract each other, forming ion pairs that behave as single particles rather than two or more independent particles. This reduces the effective van't Hoff factor below the theoretical value. For example, NaCl theoretically gives i = 2 (Na⁺ + Cl⁻), but observed ΔTb suggests an effective i ≈ 1.905. This phenomenon is described by the Debye-Hückel theory.
Why the other 3 choices miss
B
Incorrect because Kb is a property of the solvent (water) and is accurate for non-electrolyte solutions like glucose, as confirmed by the near-perfect match between predicted and observed glucose values.
C
Incorrect because common ionic compounds (NaCl, CaCl₂) do not decompose at the temperatures involved (100°C range); they are thermally stable in dilute aqueous solution.
D
Incorrect because electrolytes are ionic and non-volatile; they do not evaporate from solution, so this cannot explain the reduced ΔTb.

Studied alongside

Other concepts from Science.