Skip to content
ACT · Science

Le Chatelier

Le Chatelier appears in 5 reviewed ACT questions and sits in Science. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Le Chatelier is tested

Example 1Harder
Experiment 3: A student studied how the concentration of a product in a chemical equilibrium responds to changes in reactant concentration, testing Le Chatelier's Principle for the reaction: A + B ⇌ C + D. Initial [A] (mol/L) | Initial [B] (mol/L) | Equilibrium [C] (mol/L) 0.10 | 0.10 | 0.06 0.20 | 0.10 | 0.10 0.40 | 0.10 | 0.16 0.10 | 0.20 | 0.10 0.10 | 0.40 | 0.16 0.20 | 0.20 | 0.13 Based on the data, what happens to [C] at equilibrium when both [A] and [B] are doubled simultaneously?
  1. A[C] decreases because excess reactants push equilibrium backward.
  2. B[C] increases to approximately 0.13 mol/L, more than the effect of doubling either reactant alone.Correct
  3. C[C] doubles from 0.06 to 0.12 mol/L.
  4. D[C] remains unchanged because doubling both reactants cancels out.

Why B is right

Looking at the last row: when [A] = 0.20 and [B] = 0.20 (both doubled from the baseline of 0.10 each), equilibrium [C] = 0.13 mol/L. Doubling A alone gave 0.10; doubling B alone also gave 0.10; doubling both gives 0.13 — more than either alone but not additive.
Why the other 3 choices miss
A
Incorrect because Le Chatelier's Principle states that adding more reactants shifts equilibrium toward products, increasing [C], not decreasing it.
C
Incorrect because doubling both reactants gives [C] = 0.13 mol/L, not 0.12 mol/L; the relationship is not simply linear.
D
Incorrect because the data show [C] = 0.13 mol/L when both are doubled, which is higher than the baseline 0.06 mol/L.
Example 2Medium
Experiment 7: A chemistry student investigated Le Chatelier's Principle using the reaction: N2(g) + 3H2(g) ⇌ 2NH3(g). The student measured ammonia (NH3) concentration after applying different stresses to the equilibrium system. Stress Applied | Initial NH3 (mol/L) | NH3 After Stress (mol/L) Added N2 | 0.40 | 0.52 Removed NH3 | 0.40 | 0.40 (new eq.) Increased temperature | 0.40 | 0.28 Decreased pressure | 0.40 | 0.31 Note: For this reaction, the forward reaction is exothermic (releases heat). Why does increasing temperature decrease the ammonia concentration at equilibrium?
  1. AHigher temperature increases the volume of the gas container, reducing concentration.
  2. BFor an exothermic reaction, adding heat shifts equilibrium toward the reactants, reducing products.Correct
  3. CHigher temperatures break all chemical bonds, destroying ammonia molecules.
  4. DTemperature changes do not affect equilibrium; another variable must explain the decrease.

Why B is right

For an exothermic forward reaction, heat is a product. Adding heat (increasing temperature) shifts the equilibrium to the left (toward reactants) by Le Chatelier's Principle, decreasing NH3 (product) concentration, which is confirmed by the data (0.40 → 0.28 mol/L).
Why the other 3 choices miss
A
Incorrect because in a closed container, volume may not change with temperature unless pressure is also changed; the experiment table shows pressure change as a separate variable.
C
Incorrect because while high temperatures can denature proteins, standard chemical equilibrium does not involve 'breaking all bonds' at moderate laboratory temperatures.
D
Incorrect because the data clearly show temperature stress causing a decrease in NH3, and Le Chatelier's Principle specifically predicts this effect for exothermic reactions.
Example 3Harder
Experiment 8: A chemist tested the effect of adding a reactant, a product, and changing temperature on the position of a chemical equilibrium for the reaction: CO(g) + 2H2(g) ⇌ CH3OH(g). This reaction is exothermic in the forward direction. Stress Applied | Equilibrium Shift | Effect on CH3OH Yield Add more CO | Right (toward products) | Increase Remove CH3OH | Right (toward products) | Increase Increase temperature | Left (toward reactants) | Decrease Increase total pressure | Right (toward products) | Increase A chemical engineer wants to maximize CH3OH yield. Based on the data, which combination of conditions would be most effective?
  1. AHigh CO concentration, high temperature, low pressure
  2. BLow CO concentration, low temperature, low pressure
  3. CHigh CO concentration, low temperature, high pressureCorrect
  4. DLow CO concentration, high temperature, high pressure

Why C is right

To maximize CH3OH yield: add more CO (shifts equilibrium right, increasing yield), use low temperature (the forward reaction is exothermic, so low temperature shifts equilibrium right), and use high pressure (favors the side with fewer moles of gas, shifting right). All three of these conditions are met by option C: high CO concentration, low temperature, high pressure.
Why the other 3 choices miss
A
Incorrect because high temperature decreases yield AND low pressure does not favor the forward reaction (increasing pressure favors the side with fewer moles of gas).
B
Incorrect because low CO concentration would not shift equilibrium toward products, and low pressure would not favor CH3OH formation.
D
Incorrect because high temperature shifts the equilibrium left, decreasing CH3OH yield, contradicting the goal of maximizing yield.

Studied alongside

Other concepts from Science.