Skip to content
ACT · Science

Photoelectric effect

Photoelectric effect appears in 3 reviewed ACT questions and sits in Science. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Photoelectric effect is tested

Example 1Harder
Experiment 6: A student measured the minimum frequency of light (threshold frequency) required to eject electrons from five different metals in a photoelectric effect experiment. Electron ejection requires photon energy ≥ work function (Φ) of the metal. Metal | Work Function Φ (eV) | Threshold Frequency (×10¹⁴ Hz) Cesium | 1.95 | 4.71 Potassium | 2.30 | 5.56 Sodium | 2.46 | 5.95 Aluminum | 4.08 | 9.87 Gold | 5.10 | 12.33 A student illuminates gold with UV light of frequency 1.0 × 10¹⁵ Hz. Will electrons be ejected?
  1. ANo, because 1.0 × 10¹⁵ Hz is below gold's threshold frequency of 12.33 × 10¹⁴ Hz.Correct
  2. BYes, because 1.0 × 10¹⁵ Hz = 10.0 × 10¹⁴ Hz is below gold's threshold of 12.33 × 10¹⁴ Hz.
  3. CYes, because UV light has more energy than visible light and will always cause electron ejection.
  4. DNo, because UV light is not visible and cannot cause the photoelectric effect.

Why A is right

Gold's threshold frequency = 12.33 × 10¹⁴ Hz. The incident UV frequency = 1.0 × 10¹⁵ Hz = 10.0 × 10¹⁴ Hz. Since 10.0 × 10¹⁴ < 12.33 × 10¹⁴ Hz, the photon energy is below gold's work function, and no electrons will be ejected.
Why the other 3 choices miss
B
Incorrect — this answer contains contradictory reasoning. 1.0 × 10¹⁵ Hz = 10.0 × 10¹⁴ Hz, which is below the threshold of 12.33 × 10¹⁴ Hz, so no electrons are ejected.
C
Incorrect because whether electrons are ejected depends on whether the light's frequency exceeds the specific metal's threshold — not just whether it's UV. UV light does not eject electrons from gold at 10.0 × 10¹⁴ Hz.
D
Incorrect because UV light can absolutely cause the photoelectric effect — the photoelectric effect depends on photon energy (frequency), not on whether light is visible; UV can eject electrons from cesium, potassium, and sodium.
Example 2Harder
Experiment 2: A physicist measured the work function (Φ) of an unknown metal using a photoelectric effect apparatus, illuminating the metal with light of different frequencies and measuring the maximum kinetic energy (KE_max) of ejected electrons. Light Frequency (×10¹⁴ Hz) | KE_max (eV) 4.5 | 0 (no emission) 5.0 | 0 (no emission) 5.5 | 0.07 6.0 | 0.28 7.0 | 0.69 8.0 | 1.10 10.0 | 1.92 Note: KE_max = hf - Φ, where h = 4.14 × 10⁻¹⁵ eV·s Based on the data, what is the approximate work function of the unknown metal?
  1. A2.49 eV
  2. B1.86 eV
  3. C2.28 eVCorrect
  4. D2.07 eV

Why C is right

No emission occurs at 5.0 × 10¹⁴ Hz, but emission occurs at 5.5 × 10¹⁴ Hz. Threshold frequency is between 5.0 and 5.5 × 10¹⁴ Hz. Using the 5.5 × 10¹⁴ Hz data point: Φ = hf - KE_max = (4.14 × 10⁻¹⁵)(5.5 × 10¹⁴) - 0.07 = 2.277 - 0.07 = 2.207 ≈ 2.28 eV. Cross-checking with 8.0 × 10¹⁴ Hz: Φ = (4.14 × 10⁻¹⁵)(8.0 × 10¹⁴) - 1.10 = 3.312 - 1.10 = 2.21 ≈ 2.28 eV.
Why the other 3 choices miss
A
Incorrect because 2.49 eV would require threshold at 2.49/(4.14×10⁻¹⁵) = 6.0×10¹⁴ Hz, but emission DOES occur at 5.5×10¹⁴ Hz, ruling out such a high work function.
B
Incorrect because 1.86 eV would place the threshold frequency at 1.86/(4.14×10⁻¹⁵) = 4.5×10¹⁴ Hz, but emission does not occur at 4.5×10¹⁴ Hz, so the work function must be higher.
D
Incorrect because 2.07 eV corresponds to threshold at 5.0×10¹⁴ Hz; since no emission occurs at 5.0×10¹⁴ Hz, the actual threshold (and work function) must be slightly above this.
Example 3Medium
A student studied the photoelectric effect using a metal surface with a work function (φ) of 4.5 eV. Ultraviolet light of varying frequencies was shone on the metal, and the maximum kinetic energy (KE_max) of ejected electrons was measured. Data: Frequency (× 10¹⁵ Hz) / KE_max (eV): 1.09 Hz: 0 eV (no emission). 1.20 Hz: 0.46 eV. 1.40 Hz: 1.29 eV. 1.60 Hz: 2.12 eV. 1.80 Hz: 2.95 eV. 2.00 Hz: 3.78 eV. The equation for the photoelectric effect is: KE_max = hf − φ, where h = 4.14 × 10⁻¹⁵ eV·s. Using the data, what is the threshold frequency (f₀) for this metal?
  1. A1.00 × 10¹⁵ Hz
  2. B1.20 × 10¹⁵ Hz
  3. C1.09 × 10¹⁵ HzCorrect
  4. D1.12 × 10¹⁵ Hz

Why C is right

The threshold frequency is where KE_max = 0: f₀ = φ/h = 4.5 eV / (4.14 × 10⁻¹⁵ eV·s) = 1.087 × 10¹⁵ Hz ≈ 1.09 × 10¹⁵ Hz. The data confirm this: at 1.09 × 10¹⁵ Hz, KE_max = 0 (no emission). At frequencies above this threshold, electrons are emitted.
Why the other 3 choices miss
A
Incorrect because at 1.00 × 10¹⁵ Hz, hf = 4.14 eV, less than the work function (4.5 eV); no emission would occur, but this is below the threshold, not equal to it.
B
Incorrect because at 1.20 × 10¹⁵ Hz the data show KE_max = 0.46 eV > 0, meaning this frequency already exceeds the threshold; it cannot be the threshold frequency.
D
Incorrect because 1.12 × 10¹⁵ Hz × 4.14 × 10⁻¹⁵ eV·s = 4.64 eV > φ; some electron emission would occur at this frequency, so it exceeds the threshold.

Studied alongside

Other concepts from Science.