Skip to content
ACT · Science

Specific heat capacity

Specific heat capacity appears in 6 reviewed ACT questions and sits in Science. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Specific heat capacity is tested

Example 1Medium
A student compared the specific heat capacities of four metals and used the data to explain everyday observations. Specific heat capacity (J/g·°C): Aluminum = 0.902. Copper = 0.385. Iron = 0.449. Gold = 0.129. The student heated 100 g samples of each metal in boiling water (100°C) and then placed them on an ice block (at 0°C). The amount of ice melted was measured. Heat of fusion of ice = 334 J/g. If each metal starts at 100°C and ends at 0°C, which metal would melt the most ice?
  1. AAluminumCorrect
  2. BCopper
  3. CIron
  4. DGold

Why A is right

Heat transferred = m × Cp × ΔT = 100 g × Cp × (100 − 0°C) = 100 × Cp × 100. Aluminum: Q = 100 × 0.902 × 100 = 9,020 J. Copper: Q = 100 × 0.385 × 100 = 3,850 J. Iron: Q = 100 × 0.449 × 100 = 4,490 J. Gold: Q = 100 × 0.129 × 100 = 1,290 J. Mass of ice melted = Q/334 J/g: Aluminum = 9,020/334 = 27.0 g. Copper = 11.5 g. Iron = 13.4 g. Gold = 3.9 g. Aluminum melts the most ice.
Why the other 3 choices miss
B
Incorrect because copper stores 3,850 J and melts 11.5 g of ice — less than aluminum (9,020 J, 27.0 g).
C
Incorrect because iron stores 4,490 J and melts 13.4 g of ice — less than aluminum's 27.0 g.
D
Incorrect because gold has the lowest specific heat (0.129 J/g·°C), so it stores the least energy per gram and melts the least ice (3.9 g).
Example 2Harder
A chemistry student performs a calorimetry experiment to determine the specific heat capacity of an unknown metal. The student heats 50.0 g of the metal to 95.0°C and then drops it into 100.0 g of water initially at 20.0°C in an insulated calorimeter. The final temperature of the mixture is 24.6°C. (Specific heat of water = 4.18 J/g·°C) Using the equation q = mcΔT and assuming no heat loss to the environment, what is the specific heat capacity of the metal?
  1. A0.27 J/g·°C
  2. B0.14 J/g·°C
  3. C0.54 J/g·°CCorrect
  4. D1.92 J/g·°C

Why C is right

Heat gained by water = 100.0 × 4.18 × (24.6 - 20.0) = 100 × 4.18 × 4.6 = 1922.8 J. Heat lost by metal = 1922.8 J. ΔT of metal = 95.0 - 24.6 = 70.4°C. c = q / (m × ΔT) = 1922.8 / (50.0 × 70.4) = 1922.8 / 3520 ≈ 0.546 J/g·°C ≈ 0.54 J/g·°C.
Why the other 3 choices miss
A
Incorrect; 0.27 J/g·°C would result from halving the correct answer, possibly by using 100°C instead of 70.4°C for the metal's temperature change.
B
Incorrect; 0.14 J/g·°C would result from incorrectly using ΔT of the water in the denominator for the metal or from an arithmetic error.
D
Incorrect; 1.92 J/g·°C is close to the specific heat of water (4.18) divided by 2 — perhaps from incorrectly swapping the metal and water values.
Example 3Harder
A student compares two calorimetry experiments using different metals. Both experiments use 200 g of water starting at 20°C. The final temperatures and metal properties are: Experiment | Metal | Metal Mass (g) | Metal Initial Temp (°C) | Final Temp (°C) | Specific Heat (J/g·°C) 1 | Copper | 100 | 100 | 22.9 | 0.385 2 | Iron | 100 | 100 | 26.0 | 0.449 Which metal transferred more heat energy to the water, and what property explains the difference?
  1. ABoth metals transferred the same amount of heat since they have the same mass and initial temperature.
  2. BIron transferred more heat because it has a higher specific heat capacity.Correct
  3. CCopper transferred more heat because it started at a higher temperature than iron.
  4. DCopper transferred more heat because it has a higher density.

Why B is right

The heat a metal gives up is q = mcΔT. For iron: q = 100 g × 0.449 J/g·°C × (100 − 26.0)°C = 100 × 0.449 × 74.0 ≈ 3,320 J. For copper: q = 100 g × 0.385 J/g·°C × (100 − 22.9)°C = 100 × 0.385 × 77.1 ≈ 2,970 J. The water confirms this: the same 200 g of water warmed by 6.0°C with iron and by only 2.9°C with copper. The two metals had the same mass and the same starting temperature, so the difference comes from specific heat. Iron's higher specific heat (0.449 vs. 0.385 J/g·°C) means it stores and releases more energy per gram per degree. The answer is B.
Why the other 3 choices miss
A
Equal mass and equal starting temperature do not mean equal heat. The metals have different specific heats, and the water warmed by 6.0°C with iron but only 2.9°C with copper.
C
Both metals started at the same temperature, 100°C, so starting temperature cannot explain a difference. Copper also transferred less heat (about 2,970 J vs. 3,320 J), not more.
D
The table gives no density data, and density does not appear in q = mcΔT. Copper also transferred less heat than iron, not more.

Studied alongside

Other concepts from Science.