Skip to content
ACT · Science

Thermochemistry

Thermochemistry appears in 5 reviewed ACT questions and sits in Science. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Thermochemistry is tested

Example 1Harder
Experiment 9: A student performed a series of neutralization reactions and measured the heat released (enthalpy change, ΔH) when different acids reacted with sodium hydroxide solution: Reaction | Acid Type | ΔH (kJ/mol) HCl + NaOH → NaCl + H2O | Strong acid | -57.3 HNO3 + NaOH → NaNO3 + H2O | Strong acid | -57.1 H2SO4 + 2NaOH → Na2SO4 + 2H2O | Strong acid (per mole H2O) | -57.2 CH3COOH + NaOH → CH3COONa + H2O | Weak acid | -55.2 HCN + NaOH → NaCN + H2O | Very weak acid | -11.7 Why do strong acid-strong base reactions release approximately the same heat, while weak acid reactions release less?
  1. AStrong acids are more concentrated than weak acids in these experiments.
  2. BThe molecular weight of weak acids reduces the amount of heat per gram.
  3. CStrong acids fully dissociate, so the net reaction is always H+ + OH- → H2O; weak acids must first dissociate (endothermic), reducing net heat released.Correct
  4. DStrong bases react only with strong acids, releasing more energy per reaction.

Why C is right

Strong acids are fully dissociated in solution, so their neutralization is simply H⁺ + OH⁻ → H₂O, releasing approximately -57 kJ/mol regardless of the acid's identity. Weak acids must first partially dissociate (an endothermic process) before neutralization, reducing the net heat released. HCN is extremely weak, requiring substantial energy to dissociate, leaving only -11.7 kJ/mol net heat.
Why the other 3 choices miss
A
Incorrect because concentration is not the variable being tested; all reactions are measured per mole, eliminating concentration as an explanation.
B
Incorrect because ΔH is expressed per mole of reaction, not per gram, so molecular weight differences are already accounted for.
D
Incorrect because NaOH (a strong base) reacts with all the acids listed — both strong and weak — so it does not selectively react only with strong acids.
Example 2Easier
Experiment 5: A student constructed a simple calorimeter to measure the heat of combustion of different fuels by burning measured amounts and measuring temperature rise in 1 kg of water. Fuel | Mass Burned (g) | Temperature Rise (°C) | Heat Released (kJ/g) Wood | 2.0 | 7.1 | 14.9 Ethanol | 1.0 | 7.1 | 29.7 Propane | 0.5 | 7.1 | 59.4 Hydrogen | 0.2 | 7.1 | 148.5 Note: q = mcΔT; Water: m = 1 kg, c = 4.18 kJ/kg°C; Total heat ≈ 29.7 kJ per trial. A hiker needs a fuel with more than 100 kJ per gram for a lightweight backpacking stove. Based on the data, which fuel meets this requirement?
  1. AEthanol
  2. BHydrogenCorrect
  3. CPropane
  4. DWood

Why B is right

Only hydrogen has a heat of combustion exceeding 100 kJ/g (148.5 kJ/g). Wood (14.9), ethanol (29.7), and propane (59.4) all fall below the 100 kJ/g requirement. The data and relationship in the passage point to this result more directly than the other choices.
Why the other 3 choices miss
A
Incorrect because ethanol releases 29.7 kJ/g, which is less than one-third of the required 100 kJ/g.
C
Incorrect because propane releases 59.4 kJ/g, which is above ethanol and wood but still below the 100 kJ/g threshold.
D
Incorrect because wood releases only 14.9 kJ/g, far below the 100 kJ/g requirement.
Example 3Medium
Experiment 1: A chemistry student investigated the enthalpy of dissolving four salts in water by measuring temperature change when 5 g of each salt was dissolved in 100 mL of water at 22°C. Salt | Temperature After Dissolving (°C) | ΔH (kJ/mol) Ammonium chloride (NH4Cl) | 17.8 | +14.8 (endothermic) Potassium nitrate (KNO3) | 18.2 | +34.9 (endothermic) Lithium chloride (LiCl) | 28.3 | -37.0 (exothermic) Calcium chloride (CaCl2) | 32.1 | -81.3 (exothermic) Which two salts would be most useful for making a cold pack (ice pack substitute)?
  1. AAll four salts could be used since all change temperature when dissolved.
  2. BLithium chloride and calcium chloride, because they release heat into the surrounding water.
  3. CPotassium nitrate and calcium chloride, because they have the largest ΔH values in the table.
  4. DAmmonium chloride and potassium nitrate, because they absorb heat as they dissolve.Correct

Why D is right

Cold packs work by absorbing heat from the surroundings (endothermic processes), cooling whatever they contact. Ammonium chloride and potassium nitrate both absorb heat as they dissolve (temperature drops below initial 22°C to 17.8 and 18.2°C), making them suitable for cold packs.
Why the other 3 choices miss
A
Incorrect because cold packs specifically require endothermic processes; exothermic salts would warm up and be dangerous to apply to injured tissue.
B
Incorrect because lithium chloride and calcium chloride are exothermic (temperature rises) — they would make hot packs, not cold packs.
C
Incorrect because potassium nitrate is endothermic (correct for cold pack) but calcium chloride is exothermic (opposite effect); 'largest ΔH' doesn't guarantee the same direction of temperature change.

Studied alongside

Other concepts from Science.