Skip to content

Unit 6 of 8

The Integral

20% of the exam515 reviewed questions13 key terms14 min read

The Integral is worth about 20% of the AP Calculus AB exam. Our bank tests it with 515 reviewed questions across 13 distinct ideas — 51 easier, 267 medium and 197 harder.

On this page · 12 sections

An integral adds up a rate over an interval. If water flows into a tank at $r(t)$ liters per minute, then $\int_0^{10} r(t)\,dt$ is the number of liters that came in during those ten minutes. On a graph, that same number is the signed area between the curve and the horizontal axis. This unit teaches you to estimate that number with rectangles and trapezoids, define it exactly as a limit, and then compute it quickly with antiderivatives.

The Fundamental Theorem of Calculus connects those two ideas. Part 1 says that if you build a function by piling up area, $g(x)=\int_a^x f(t)\,dt$, then its derivative is $g'(x)=f(x)$. Part 2 says you can evaluate $\int_a^b f(x)\,dx$ as $F(b)-F(a)$, where $F$ is any antiderivative of $f$. Together they show that integrating and differentiating undo each other. That is why the second half of the unit is about finding antiderivatives: the basic rules, u-substitution, long division and completing the square.

Unit 6 carries roughly 17–20% of the AB exam. The hardest questions rarely test a single rule in isolation. They make you choose between displacement and total distance, left and right sums, or changing the bounds and back-substituting. Each topic below is built around those decisions.

The unit in a minute

One line per topic. Tap any line for the full notes.

  1. Riemann sums and the trapezoidal ruleName the sample points before you compute: $n$ pieces means $n$ heights for a rectangle sum, and $n+1$ values for a trapezoidal sum.
  2. The definite integral as a limit and as signed areaIn a limit of a sum, $\Delta x$ gives you the length of the interval and $x_k$ gives you the starting point and the integrand.
  3. Properties of definite integralsIntegrals split over intervals and over sums, and constants factor out, but products never split.
  4. The Fundamental Theorem, Part 1: accumulation functions$\frac{d}{dx}\int_a^{h(x)} f(t)\,dt = f(h(x))\,h'(x)$, and the graph of $f$ is the graph of $g'$.
  5. The Fundamental Theorem, Part 2, and net changeIntegral of a rate means change in amount; add the starting value for an amount, and use $|v|$ for distance.
  6. Antiderivatives and initial value problemsRewrite into powers, integrate term by term, check by differentiating, and use the given point to find $C$.
  7. u-substitution, indefinite and definitePick $u$ so that $du$ is already in the integrand, and on a definite integral either convert the bounds or convert back, never half of each.
  8. Long division, completing the square, and choosing a techniqueDiagnose the form before integrating: what is on top decides between a logarithm, an arctangent and a division.
Grind The Integral questionsAlready know this? Skip the notes and prove it.

The big ideas

An integral of a rate is an amount of change

If $R'(t)$ is the rate at which some quantity changes, then $\int_a^b R'(t)\,dt = R(b)-R(a)$, the net change in that quantity from $t=a$ to $t=b$. The units follow directly. A rate in gallons per hour, integrated over hours, gives gallons. So whenever a stem says "rate", expect to integrate, and expect to add a starting amount if the question asks how much there is rather than how much it changed.

Area below the axis counts as negative

A definite integral is signed area, so regions under the axis subtract. For velocity, this means $\int_a^b v(t)\,dt$ is displacement, the change in position, and backward motion cancels forward motion. Total distance never cancels, so it is $\int_a^b |v(t)|\,dt$. Most hard questions in this unit hinge on knowing which of the two the stem wants.

Differentiation and integration undo each other

FTC Part 1 says the derivative of an accumulation function is the integrand. FTC Part 2 says the integral of a derivative is the change in the original function. These are the same fact seen from opposite sides. Because of it, a definite integral that would take a thousand rectangles to estimate can be computed exactly with one antiderivative and one subtraction.

Antidifferentiation is pattern matching

There is no single procedure for finding an antiderivative. You look at the form of the integrand and pick a tool. A sum of powers uses the power rule. A function nested inside another, with the inner derivative also present, uses u-substitution. A top-heavy fraction gets divided first. A quadratic in the denominator gets its square completed. Every answer can be checked by differentiating it, and you should do that.

Study notes

8 topics. Each one opens with its key idea, then the detail you need to use it.

1. Riemann sums and the trapezoidal rule

Key idea: Name the sample points before you compute: $n$ pieces means $n$ heights for a rectangle sum, and $n+1$ values for a trapezoidal sum.

To estimate $\int_a^b f(x)\,dx$, cut $[a,b]$ into $n$ pieces of width $\Delta x=\frac{b-a}{n}$ and build a rectangle on each one. The only decision is where to measure the height. A left sum uses each piece's left endpoint, a right sum uses the right endpoint, and a midpoint sum uses the center.

Take $\int_0^4 x^2\,dx$ with 4 pieces: $[0,1],[1,2],[2,3],[3,4]$. The left sum samples at $0,1,2,3$ and never touches 4, giving $1(0+1+4+9)=14$. The right sum samples at $1,2,3,4$, giving $30$. The exact value is $\frac{64}{3}\approx 21.3$. The left sum is low because $x^2$ is increasing, so each left height is the smallest on its piece. In general, left sums underestimate an increasing function and right sums overestimate it, and the reverse holds when the function is decreasing.

A trapezoidal sum averages the left and right heights on each piece. Here it gives $\frac{14+30}{2}=22$. The general form is $\frac{\Delta x}{2}\left[f(x_0)+2f(x_1)+\cdots+2f(x_{n-1})+f(x_n)\right]$, where interior values count twice because two trapezoids share them. Since $x^2$ is concave up, the straight tops of the trapezoids sit above the curve, so 22 is an overestimate. When $f$ is concave down, the trapezoids sit below the curve, so the trapezoidal sum underestimates. A midpoint sum does the reverse of the trapezoidal rule: it underestimates when $f$ is concave up and overestimates when $f$ is concave down. Exam tables often use unequal widths. In that case, find each piece's area separately and add them, rather than trusting a formula built for equal widths.

2. The definite integral as a limit and as signed area

Key idea: In a limit of a sum, $\Delta x$ gives you the length of the interval and $x_k$ gives you the starting point and the integrand.

As $n$ grows, the rectangles get thinner and every Riemann sum approaches the same number. That limit is the definite integral: $\int_a^b f(x)\,dx=\lim_{n\to\infty}\sum_{k=1}^{n} f(x_k)\,\Delta x$.

The exam often hands you the limit and asks for the integral. Read it in parts. In $\lim_{n\to\infty}\sum_{k=1}^{n}\left(1+\frac{2k}{n}\right)^3\frac{2}{n}$, the factor $\frac{2}{n}$ is $\Delta x$, so the interval has length 2. The sample point $x_k=1+\frac{2k}{n}$ starts just past 1 and ends at 3. So the limit equals $\int_1^3 x^3\,dx$. If you instead let $x=\frac{2k}{n}$, the same limit is $\int_0^2 (1+x)^3\,dx$. Both are correct, which is why answer choices sometimes show either form.

Because the integral is signed area, you can evaluate many integrals with geometry and no antiderivative at all. For example, $\int_{-3}^{3}\sqrt{9-x^2}\,dx$ is the top half of a circle of radius 3, so it equals $\frac{9\pi}{2}$. When the exam gives a graph of $f$ made of lines and semicircles, split the interval wherever the graph crosses the axis. Then find each region's area with a triangle, rectangle or circle formula, and give it a minus sign if it lies below the axis.

3. Properties of definite integrals

Key idea: Integrals split over intervals and over sums, and constants factor out, but products never split.

A handful of rules let you combine given integral values without knowing the function. They all follow from thinking of the integral as signed area.

- $\int_a^a f(x)\,dx=0$, because a region with no width has no area. - $\int_b^a f(x)\,dx=-\int_a^b f(x)\,dx$, because reversing direction makes $\Delta x$ negative. - $\int_a^b f(x)\,dx+\int_b^c f(x)\,dx=\int_a^c f(x)\,dx$, because adjacent regions add. - $\int_a^b [k f(x)+g(x)]\,dx=k\int_a^b f(x)\,dx+\int_a^b g(x)\,dx$.

Here is a typical use. Suppose $\int_0^5 f(x)\,dx=7$ and $\int_0^2 f(x)\,dx=3$. Splitting the interval gives $\int_2^5 f(x)\,dx=4$. Then $\int_2^5 [2f(x)+1]\,dx = 2(4)+3=11$. The $+3$ is where students slip, because $\int_2^5 1\,dx$ is the width of the interval, not 1.

Two more facts save time. If $f$ is odd, then $\int_{-a}^{a} f(x)\,dx=0$, because the area on the left cancels the area on the right. If $f$ is even, the integral is twice $\int_0^a f(x)\,dx$. One thing does not work: the integral of a product is not the product of the integrals.

4. The Fundamental Theorem, Part 1: accumulation functions

Key idea: $\frac{d}{dx}\int_a^{h(x)} f(t)\,dt = f(h(x))\,h'(x)$, and the graph of $f$ is the graph of $g'$.

Define $g(x)=\int_a^x f(t)\,dt$. As $x$ moves right, $g$ collects more signed area under $f$. FTC Part 1 says $g'(x)=f(x)$. Here is why. The difference $g(x+h)-g(x)$ is a thin strip about $f(x)$ tall and $h$ wide, so its area is about $f(x)\cdot h$. Divide by $h$ and let $h\to 0$, and you get $f(x)$.

So $\frac{d}{dx}\int_1^x \sqrt{t^3+1}\,dt=\sqrt{x^3+1}$. You replace $t$ with $x$ and stop. You do not differentiate the integrand, and the constant lower bound adds nothing to the derivative.

When the upper bound is a function of $x$, the chain rule applies: $\frac{d}{dx}\int_0^{x^2}\cos t\,dt=\cos(x^2)\cdot 2x$. Plug in the bound, then multiply by the bound's derivative. If $x$ appears in the lower bound, flip the bounds first and add a minus sign.

The theorem also lets you analyze $g$ from a graph of $f$ alone. Since $g'=f$, $g$ increases where $f>0$ and has a relative maximum where $f$ changes from positive to negative. It is concave up where $f$ is increasing, because $g''=f'$. To find an actual value such as $g(4)$, add the signed areas from $a$ to 4. Remember that $g(a)=0$ every time.

5. The Fundamental Theorem, Part 2, and net change

Key idea: Integral of a rate means change in amount; add the starting value for an amount, and use $|v|$ for distance.

FTC Part 2 says $\int_a^b f(x)\,dx=F(b)-F(a)$ for any antiderivative $F$ of $f$. Any antiderivative works because two antiderivatives differ only by a constant, and that constant cancels in the subtraction. That is why definite integrals never carry $+C$. For example, $\int_1^3 (2x+1)\,dx=\left[x^2+x\right]_1^3=12-2=10$. Always subtract the value at the lower bound, even when it looks like it might be zero.

Read the theorem as a statement about change: $\int_a^b R'(t)\,dt=R(b)-R(a)$. Rearranged, it becomes $R(b)=R(a)+\int_a^b R'(t)\,dt$, which is the most used equation in rate problems. If a tank holds 50 gallons at $t=0$ and water enters at $r(t)$ gallons per hour, it holds $50+\int_0^{6} r(t)\,dt$ gallons at $t=6$.

For a moving particle, $\int_a^b v(t)\,dt$ is displacement and $\int_a^b |v(t)|\,dt$ is total distance. Take $v(t)=2t-4$ on $[0,5]$. Displacement is $\left[t^2-4t\right]_0^5=5$. But $v$ changes sign at $t=2$, so the particle reverses there. Its position goes from 0 to $-4$ and then to 5, so the legs are 4 and 9, and the total distance is 13. To find distance, locate every time $v=0$ with a sign change, find each leg, and add the absolute values.

6. Antiderivatives and initial value problems

Key idea: Rewrite into powers, integrate term by term, check by differentiating, and use the given point to find $C$.

An antiderivative of $f$ is any function whose derivative is $f$. The rules are the derivative rules run backward.

- $\int x^n\,dx=\frac{x^{n+1}}{n+1}+C$ for $n\neq -1$, and $\int \frac{1}{x}\,dx=\ln|x|+C$. - $\int e^x\,dx=e^x+C$. - $\int \sin x\,dx=-\cos x+C$ and $\int \cos x\,dx=\sin x+C$. - $\int \sec^2 x\,dx=\tan x+C$. - $\int \frac{1}{1+x^2}\,dx=\arctan x+C$ and $\int \frac{1}{\sqrt{1-x^2}}\,dx=\arcsin x+C$.

The sign on $\sin x$ is the most common slip. Check it by differentiating: the derivative of $-\cos x$ is $\sin x$. The $+C$ matters because every vertical shift of an antiderivative has the same derivative.

There is no product or quotient rule for integrals, so rewrite first. For instance, $\frac{x^2+1}{\sqrt{x}}=x^{3/2}+x^{-1/2}$, which integrates to $\frac{2}{5}x^{5/2}+2x^{1/2}+C$.

An initial value problem gives you $f'$ and one point, and the point pins down $C$. If $f'(x)=3x^2-4$ and $f(2)=5$, then $f(x)=x^3-4x+C$. Substituting gives $8-8+C=5$, so $C=5$ and $f(x)=x^3-4x+5$. You can also write this as $f(x)=5+\int_2^x (3t^2-4)\,dt$. That form is the only option when $f'$ has no elementary antiderivative.

7. u-substitution, indefinite and definite

Key idea: Pick $u$ so that $du$ is already in the integrand, and on a definite integral either convert the bounds or convert back, never half of each.

u-substitution reverses the chain rule. Look for an inner function whose derivative also appears as a factor, give or take a constant. Call the inner function $u$, rewrite everything in terms of $u$, integrate, and convert back.

In $\int x\cos(x^2)\,dx$, let $u=x^2$, so $du=2x\,dx$ and $x\,dx=\frac{1}{2}du$. The integral becomes $\frac{1}{2}\int \cos u\,du=\frac{1}{2}\sin(x^2)+C$. The $\frac{1}{2}$ fixes the constant mismatch. A linear inner function works the same way: $\int e^{3x}\,dx=\frac{1}{3}e^{3x}+C$. If, after substituting, some $x$ is left over that you cannot write in terms of $u$, you chose the wrong $u$.

For a definite integral you have two clean options. You can change the bounds to $u$-values and never return to $x$. Or you can find the antiderivative in $x$ and use the original bounds. For $\int_1^2 \frac{2x}{x^2+1}\,dx$, let $u=x^2+1$. Then $x=1$ gives $u=2$ and $x=2$ gives $u=5$, so the integral is $\int_2^5 \frac{1}{u}\,du=\ln 5-\ln 2=\ln\frac{5}{2}$. The error to avoid is mixing the two: using $x$-bounds on a $u$-antiderivative. Also notice that here $du=2x\,dx$ absorbs the whole factor of $2x$. Multiplying by 2 again double-counts it.

8. Long division, completing the square, and choosing a technique

Key idea: Diagnose the form before integrating: what is on top decides between a logarithm, an arctangent and a division.

Some rational functions match no basic rule until you reshape them. When the numerator's degree is at least the denominator's, divide first. For $\int \frac{x^2+3}{x+1}\,dx$, note that $x^2+3=(x+1)(x-1)+4$, so the integrand is $x-1+\frac{4}{x+1}$. Each piece is now basic, and the answer is $\frac{x^2}{2}-x+4\ln|x+1|+C$.

When the denominator is a quadratic with no real roots and there is no matching $x$ on top, complete the square to reach the arctangent form. $x^2+4x+5=(x+2)^2+1$, so $\int \frac{dx}{x^2+4x+5}=\arctan(x+2)+C$. This is really a u-substitution with $u=x+2$.

To choose a technique, run through a short list in order:

1. Can you expand or rewrite it into powers and basic forms? Then integrate term by term. 2. Is there an inner function whose derivative is also a factor? Use u-substitution. 3. Is it a fraction with the top degree at least the bottom degree? Divide. 4. Is it $\frac{1}{\text{quadratic}}$ with no $x$ on top? Complete the square.

Small differences change the tool completely. $\int \frac{x}{x^2+1}\,dx$ is a u-substitution that gives $\frac{1}{2}\ln(x^2+1)+C$. But $\int \frac{1}{x^2+1}\,dx$ has no $x$ on top to serve as $du$, so it is $\arctan x+C$.

Common mistakes

Drawn from the wrong answers students actually pick on these questions.

Differentiating when the question asks for an antiderivative, for example turning $\int (3x^2+2x)\,dx$ into $6x+2$.

Integration raises the power by one and divides by the new power. The answer to $\int (3x^2+2x)\,dx$ is $x^3+x^2+C$. Check it by differentiating your answer, which should give back the integrand.

Leaving off $+C$ on an indefinite integral, or losing a coefficient when you simplify.

Every indefinite integral needs $+C$, because a whole family of shifted functions shares the same derivative. Divide each coefficient by its new exponent carefully: $\frac{3x^3}{3}=x^3$ and $\frac{2x^2}{2}=x^2$. Definite integrals are the exception, since the constant cancels.

On $\frac{d}{dx}\int_1^x f(t)\,dt$, differentiating the integrand, or subtracting a value at the lower bound.

FTC Part 1 gives $f(x)$ directly: swap $t$ for $x$ and stop. The constant lower bound contributes nothing to the derivative. Use the chain rule only when the upper bound is a function of $x$ other than $x$ itself, or when $x$ appears in the lower bound (flip the bounds and negate first).

In a definite u-substitution, keeping the $x$-bounds, forgetting to subtract the lower value, or doubling a factor that $du$ already absorbed.

Convert both bounds to $u$-values, for example $u=x^2$ takes $x=1$ to $u=1$, not 2. Always compute $F(b)-F(a)$, so $e^1-e^0=e-1$, not $e$. If $du=2x\,dx$, the $2x$ in the integrand is used up and does not reappear as a factor.

Using the wrong sample points in a Riemann sum: right endpoints or midpoints for a left sum, or all $n+1$ partition points.

With $n$ pieces, a left sum uses the $n$ left endpoints, so it skips $x=b$. A right sum skips $x=a$, and a midpoint sum uses the center of each piece. Write the subintervals out before choosing heights.

Reporting displacement, final position, or a single leg when the question asks for total distance.

Total distance is $\int |v(t)|\,dt$. Find every time $v$ changes sign, compute the change in position on each leg, and add the absolute values. Final position at time $b$ is $s(0)+\int_0^b v(t)\,dt$. That is a different number unless the particle started at 0 and moved only in the positive direction ($v\ge 0$ the whole time).

How this unit shows up on the exam

This unit appears in every part of the exam, on both the calculator and non-calculator sections.

On non-calculator multiple choice, expect direct antiderivatives, u-substitutions with changed bounds, FTC Part 1 derivatives (often with a chain-rule bound), and integrals you evaluate with geometry from a graph of lines and semicircles. Many stems give values such as $\int_0^5 f(x)\,dx$ and ask you to combine them with the properties. Others show a limit of a Riemann sum and ask which definite integral it equals.

On calculator questions, the integral itself is usually easy for the machine, so the test is the setup. A stem gives a rate in context, such as people entering a park per hour or the velocity of a particle. It then asks for an amount at a time, a total change, or a total distance. The trap is choosing between $\int v$ and $\int |v|$, or forgetting the starting amount.

Free-response questions lean on two formats. The first is a table of values with unequal time steps, asking for a left, right, midpoint or trapezoidal estimate and whether it is an over- or underestimate. The second is a graph of $f$ with $g(x)=\int_a^x f(t)\,dt$, asking for values of $g$, where $g$ has extrema, and where it is concave up. Readers reward a written integral with correct bounds and integrand before any number. They also reward units, such as liters rather than liters per minute. Justifications earn credit when they name the reason, for instance "$g'=f$ changes from positive to negative at $x=3$." A bare calculator result with no setup usually earns little.

How the exam actually asks it

Real items from the AP Calculus AB bank, easier first. The answer is marked, and every wrong choice is explained — because knowing why a distractor is tempting is most of the work.

Worked example 1Easier
  1. ACorrect
  2. B
  3. C
  4. D

Why A is right

and . Don't forget for indefinite integrals. The antiderivative, substitution, or integration-by-parts step determines the value. The setup matters first; then the algebra or evaluation gives the final result.
Why the other 3 choices miss
B
You differentiated instead of integrating. Integration is the reverse of differentiation. This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
C
The antiderivative is correct, but you forgot the . Every indefinite integral needs it. This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
D
Simplify: . This is the same as (A) before simplifying, but you still need . This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
Worked example 2Easier
A left Riemann sum with 4 equal subintervals for uses the -values:
  1. ACorrect
  2. B
  3. C
  4. D

Why A is right

Left Riemann sum uses the left endpoint of each subinterval: . Left endpoints: . The antiderivative, substitution, or integration-by-parts step determines the value. The setup matters first; then the algebra or evaluation gives the final result.
Why the other 3 choices miss
B
Those are the right endpoints. A right Riemann sum would use . This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
C
Five points define the subinterval boundaries, but you only evaluate at 4 left endpoints. This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
D
Those are midpoints. A midpoint Riemann sum uses the middle of each subinterval. This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
Worked example 3Easier
  1. ACorrect
  2. B
  3. C
  4. D

Why A is right

Integrate term by term: . The antiderivative, substitution, or integration-by-parts step determines the value. The setup matters first; then the algebra or evaluation gives the final result.
Why the other 3 choices miss
B
An indefinite integral needs the constant of integration . This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
C
That's the derivative of the integrand; integrate (raise powers) instead. This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
D
Divide by the new power: , not . This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
Worked example 4Easier
  1. A
  2. BCorrect
  3. C
  4. D

Why B is right

. The antiderivative, substitution, or integration-by-parts step determines the value. The setup matters first; then the algebra or evaluation gives the final result.
Why the other 3 choices miss
A
That's the derivative; to integrate, raise each power by one. This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
C
Don't forget on an indefinite integral. This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.
D
Divide by the new power: , not . This distractor usually comes from choosing the wrong antiderivative step, missing a constant, or mishandling substitution. The integral has to be evaluated with the full setup intact.

Can you do all of these?

Tick what you can do without looking. Anything left unticked is where to go back to.

0 of 10 ticked

Ready to test yourself?

Open practice pulls from the 38 free questions in this unit. The other 477 come with the one-time AP purchase, which unlocks every AP course.

Official topic list

The official course framework breaks this unit into 11 numbered topics.

  1. 6.1Exploring Accumulations of Change
  2. 6.2Approximating Areas with Riemann Sums
  3. 6.3Riemann Sums, Summation Notation, and Definite Integral Notation
  4. 6.4The Fundamental Theorem of Calculus and Accumulation Functions
  5. 6.5Interpreting the Behavior of Accumulation Functions Involving Area
  6. 6.6Applying Properties of Definite Integrals
  7. 6.7The Fundamental Theorem of Calculus and Definite Integrals
  8. 6.8Finding Antiderivatives and Indefinite Integrals: Basic Rules and Notation
  9. 6.9Integrating Using Substitution
  10. 6.10Integrating Functions Using Long Division and Completing the Square
  11. 6.14Selecting Techniques for Antidifferentiation

Key terms in The Integral

Ordered by how often our reviewed questions test them. Open any term to see the questions that use it.

The rest of AP Calculus AB

Every unit with its share of the exam. You are on Unit 6.

  1. 1Pre-AP Foundations9% of exam
  2. 2Limits and Continuity7% of exam
  3. 3Definition of the Derivative15% of exam
  4. 4Differentiation Rules14% of exam
  5. 5Applications of Derivatives18% of exam
  6. 6The Integral20% of exam
  7. 7Applications of Integration8% of exam
  8. 8Differential Equations9% of exam