Skip to content

Unit 8 of 10

Differential Equations

8% of the exam278 reviewed questions12 key terms18 min read

Differential Equations is worth about 8% of the AP Calculus BC exam. Our bank tests it with 278 reviewed questions across 12 distinct ideas — 26 easier, 157 medium and 95 harder.

On this page · 12 sections

A differential equation tells you how fast something changes. Your job is to recover the thing itself, or to describe it without ever finding a formula. The equation $\frac{dy}{dx} = 2y$ says the slope at any point is twice the height there. From that one rule you can draw a slope field, step along it with Euler's method, or separate variables and get $y = Ce^{2x}$ exactly. This unit teaches all three routes and when each one is the right tool.

The pieces connect through one idea: the equation hands you the slope at every point $(x, y)$. Verifying a solution checks that a candidate function has the slope the equation demands. A slope field draws those slopes, and Euler's method follows them in small straight steps. Separation of variables undoes the derivative with antiderivatives, then uses an initial condition to pick one curve out of a family. Exponential growth, Newton's Law of Cooling and logistic growth are three equations you will see so often that you should know their solutions and long-run behavior on sight.

Most points lost in this unit come from small, repeatable errors rather than hard ideas. Students put the constant of integration in the wrong place, swap the growth rate with the starting value, or read a slope field at the wrong coordinate. On the free-response section, separation of variables is scored step by step, so a missing constant can cost you more than the final answer. BC adds logistic growth and Euler's method, and both appear in multiple-choice and free-response questions.

The unit in a minute

One line per topic. Tap any line for the full notes.

  1. Verifying solutions: general and particularSubstitute into both sides and simplify; a solution must match for every $x$, and an initial condition then fixes $C$.
  2. Slope fields and how to reason with themTest the axes, look for column or row patterns, and find where the slope is zero; a flat row across the field is an equilibrium solution.
  3. Separation of variables and the domain of a solutionSeparate, integrate with one constant, apply the initial condition, then solve for $y$; $e^{x + C}$ becomes $Ae^{x}$, not $e^{x} + C$.
  4. Exponential growth and decay, and modeling from words$\frac{dy}{dt} = ky$ means $y = y_0e^{kt}$: the starting value goes in front, the rate constant goes in the exponent.
  5. Newton's Law of Cooling$T = A + (T_0 - A)e^{-kt}$: the gap to the surrounding temperature decays exponentially, so the rate is largest when the gap is largest.
  6. Logistic growthCarrying capacity is the nonzero zero of $\frac{dP}{dt}$, $P$ approaches it in the long run, and growth is fastest at half of it.
  7. Euler's methodNew $y$ = old $y$ + slope at the old point times $\Delta x$; concave up means Euler underestimates, concave down means it overestimates.
  8. Second-derivative analysisDifferentiate implicitly, substitute the original $\frac{dy}{dx}$, and use the sign of $\frac{d^2y}{dx^2}$ to judge concavity, extrema and over- or underestimates.
Grind Differential Equations questionsAlready know this? Skip the notes and prove it.

The big ideas

The equation gives the slope everywhere

Read $\frac{dy}{dx} = f(x, y)$ as a slope machine. Plug in a point and it returns the slope of the solution curve through that point. That is why you can draw a slope field without solving anything, and why Euler's method needs only the equation and a starting point. It also means you can find $\frac{d^2y}{dx^2}$ straight from the equation. The tangent line at a point and the concavity there both come from the equation, not from a formula for $y$.

A family of curves, then one curve

Solving a differential equation gives a general solution with a constant, such as $y = Ce^{-2x}$. Every value of $C$ gives a valid curve, so the general solution is a whole family. An initial condition like $y(0) = 5$ picks one member, here $C = 5$, and that curve is the particular solution. It lives on an interval that contains the starting $x$-value, and it cannot jump across a point where the formula breaks.

The form of the rate decides the form of the answer

The right side of the equation predicts the type of function you get. A rate proportional to the amount, $\frac{dy}{dt} = ky$, always gives an exponential $Ce^{kt}$. A rate proportional to the gap from a fixed value, $\frac{dT}{dt} = -k(T - A)$ with $k > 0$, gives an exponential that levels off at $A$. A rate proportional to both the amount and the room left, $\frac{dP}{dt} = kP\left(1 - \frac{P}{L}\right)$, gives an S-shaped curve that levels off at $L$. Translate the words into one of these forms and you already know the shape of the solution.

Check by substituting, every time

You can test any proposed solution in under a minute. Differentiate it, put it into both sides of the equation, and see whether the two sides agree for every $x$. This check catches swapped constants, wrong exponent signs and missing chain-rule factors. It also works for second-order equations and implicit relations, so a whole class of multiple-choice questions comes down to careful differentiation.

Study notes

8 topics. Each one opens with its key idea, then the detail you need to use it.

1. Verifying solutions: general and particular

Key idea: Substitute into both sides and simplify; a solution must match for every $x$, and an initial condition then fixes $C$.

To verify a solution, compute the derivatives the equation uses. Then substitute the function into the left side and the right side separately. Take $y = Ce^{-x} + 2$ and $\frac{dy}{dx} = 2 - y$. The left side is $-Ce^{-x}$, and the right side is $2 - (Ce^{-x} + 2) = -Ce^{-x}$. They match for every value of $C$, so this formula is the general solution, a whole family of curves.

Matching at a few points is not enough. For $\frac{dy}{dx} = 3y$, the function $y = x^3$ has derivative $3x^2$, while $3y = 3x^3$. The two sides agree at $x = 0$ and $x = 1$ but nowhere else, so $x^3$ fails. A constant multiplier is harmless here, because $y = 5e^{-2x}$ solves $\frac{dy}{dx} = -2y$. An added constant is not, because $y = e^{-2x} + 5$ puts a $-10$ on the right side that the derivative never produces.

Second-order equations work the same way. For $y'' + 4y = 0$, try $y = \sin(2x)$. Then $y'' = -4\sin(2x)$, and the sum is zero. With $\sin(4x)$, $y'' = -16\sin(4x)$ and the sum is $-12\sin(4x)$, so it fails. Implicit relations are checked by implicit differentiation. From $x^2 + y^2 = 25$ you get $2x + 2y\frac{dy}{dx} = 0$, so the circle solves $\frac{dy}{dx} = -\frac{x}{y}$.

A particular solution is the one member of the family that passes through a given point. If $y(0) = 7$ in the first example, then $7 = C + 2$, so $C = 5$.

2. Slope fields and how to reason with them

Key idea: Test the axes, look for column or row patterns, and find where the slope is zero; a flat row across the field is an equilibrium solution.

A slope field is a grid of short segments. At each grid point, the segment has the slope the equation gives there. To sketch one, evaluate $\frac{dy}{dx}$ at each listed point and draw a short segment with that slope. Zero slopes are flat, and large slopes are steep.

To match a field to an equation, run three quick checks. First, test the axes. For $\frac{dy}{dx} = x$, every point on the $y$-axis has $x = 0$, so every segment there is flat. Second, look for patterns. If the slope depends only on $x$, the segments in each vertical column are identical. If it depends only on $y$, the segments in each horizontal row are identical. Third, find where the slope is zero. For $\frac{dy}{dx} = x - y$, the flat segments lie along the line $y = x$, with positive slopes below it and negative slopes above it.

A row of flat segments running across the whole field marks an equilibrium solution. For $\frac{dy}{dx} = y(2 - y)$, the lines $y = 0$ and $y = 2$ are solutions. Between them the slope is positive, so a curve starting at $y = 1$ rises toward 2. Above 2 the slope is negative, so curves fall back toward 2. This is how you answer a question about $\lim_{x\to\infty} y$ straight from a slope field.

To sketch a particular solution, start at the given point and follow the segments. Your curve should run along the segments it passes, not cut across them.

3. Separation of variables and the domain of a solution

Key idea: Separate, integrate with one constant, apply the initial condition, then solve for $y$; $e^{x + C}$ becomes $Ae^{x}$, not $e^{x} + C$.

Separation works when the equation can be written as $\frac{dy}{dx} = g(x)h(y)$. Move every $y$ to the side with $dy$ and every $x$ to the side with $dx$. Then integrate both sides, add one constant, apply the initial condition, and solve for $y$.

Take $\frac{dy}{dx} = 2y$ with $y(0) = 3$. Separating gives $\frac{1}{y}\,dy = 2\,dx$, and integrating gives $\ln|y| = 2x + C$. Exponentiate to get $|y| = e^{2x + C} = e^{C}e^{2x}$. Because $e^{C}$ is just a constant, write $y = Ae^{2x}$. Then $3 = Ae^{0}$, so $y = 3e^{2x}$. The constant multiplies $e^{2x}$ because $e^{2x + C}$ splits into a product. That is why $y = e^{2x} + 2$ is wrong, even though it also passes through $(0, 3)$.

A particular solution also needs a domain. It is an open interval that contains the initial $x$-value, on which the solution is defined and differentiable. For $\frac{dy}{dx} = xy^2$ with $y(0) = 1$, separating gives $y^{-2}\,dy = x\,dx$, so $-\frac{1}{y} = \frac{x^2}{2} + C$. The point $(0, 1)$ gives $C = -1$, and solving gives $y = \frac{2}{2 - x^2}$. The formula breaks at $x = \pm\sqrt{2}$. The solution curve cannot jump across a break, so its domain is $-\sqrt{2} < x < \sqrt{2}$, not every $x$ except $\pm\sqrt{2}$.

4. Exponential growth and decay, and modeling from words

Key idea: $\frac{dy}{dt} = ky$ means $y = y_0e^{kt}$: the starting value goes in front, the rate constant goes in the exponent.

The sentence "the rate of change of $y$ is proportional to $y$" translates to $\frac{dy}{dt} = ky$. Its solutions are exactly the functions $y = y_0e^{kt}$, where $y_0$ is the value at $t = 0$. If $k > 0$ the quantity grows, and if $k < 0$ it decays. The starting value sits in front and the rate constant sits in the exponent, and swapping them is a classic wrong answer.

You usually find $k$ from a second data point. Suppose a culture of 200 bacteria triples in 5 hours. Then $600 = 200e^{5k}$, so $e^{5k} = 3$ and $k = \frac{\ln 3}{5} \approx 0.22$ per hour. Decay works the same way. A half-life of $h$ years means $\frac{1}{2} = e^{kh}$, so $k = -\frac{\ln 2}{h}$.

Do not confuse a constant rate with a proportional one. $\frac{dy}{dt} = 2$ gives a straight line, $y = 2t + y_0$. But $\frac{dy}{dt} = 2y$ gives an exponential, because the rate grows as $y$ grows.

Modeling questions test translation more than solving. "Proportional to the square root of $V$" means $\frac{dV}{dt} = k\sqrt{V}$. "Inversely proportional to $y$" means $\frac{dy}{dt} = \frac{k}{y}$. "Proportional to the difference between 100 and $y$" means $\frac{dy}{dt} = k(100 - y)$. "Jointly proportional to $P$ and $500 - P$" means $\frac{dP}{dt} = kP(500 - P)$. Once you have the equation, the rest is separation or a solution form you already know.

5. Newton's Law of Cooling

Key idea: $T = A + (T_0 - A)e^{-kt}$: the gap to the surrounding temperature decays exponentially, so the rate is largest when the gap is largest.

Newton's Law of Cooling says an object's temperature changes at a rate proportional to the gap between its temperature and the surrounding temperature. With surrounding temperature $A$, write $\frac{dT}{dt} = -k(T - A)$, where $k > 0$. If $T > A$, the right side is negative, so the object cools. If $T < A$, the right side is positive, so it warms. Either way it moves toward $A$.

Substitute $u = T - A$ and the equation becomes $\frac{du}{dt} = -ku$, so $u = u_0e^{-kt}$. Back in terms of $T$, the solution is $T = A + (T_0 - A)e^{-kt}$. The gap shrinks exponentially, so $T$ approaches $A$ but never reaches it.

Here is a full example. Coffee at 90°C sits in a 20°C room and reads 60°C after 10 minutes. The gap starts at 70 and falls to 40, so $40 = 70e^{-10k}$. That gives $k = \frac{\ln(7/4)}{10} \approx 0.056$ per minute. After 20 minutes the gap is $70\left(\frac{4}{7}\right)^2 \approx 22.9$, so the coffee is about 42.9°C.

The rate is fastest at the start, when the gap is largest. At $t = 0$ the coffee cools at about $0.056 \times 70 \approx 3.9$ degrees per minute. At 60°C it cools at about $0.056 \times 40 \approx 2.2$ degrees per minute. That shrinking rate is why a cooling curve is concave up. Many questions ask for the rate at a given temperature, and you get it straight from the equation without solving.

6. Logistic growth

Key idea: Carrying capacity is the nonzero zero of $\frac{dP}{dt}$, $P$ approaches it in the long run, and growth is fastest at half of it.

Logistic growth models a population that grows fast at first and then levels off at a carrying capacity $L$. The equation is $\frac{dP}{dt} = kP\left(1 - \frac{P}{L}\right)$ with $k > 0$. When $P$ is small, the factor in parentheses is close to 1, so growth is nearly exponential. As $P$ nears $L$, that factor nears 0, so growth stalls.

You can read most answers straight from the equation. The carrying capacity is the nonzero value of $P$ where $\frac{dP}{dt} = 0$. If $0 < P(0) < L$, the population increases toward $L$, so $\lim_{t\to\infty} P(t) = L$. If $P(0) > L$, the rate is negative, and $P$ decreases toward $L$. The population grows fastest when $P = \frac{L}{2}$. That is because $kP\left(1 - \frac{P}{L}\right)$ is a downward parabola in $P$, with its vertex halfway between its zeros at 0 and $L$. If $0 < P(0) < \frac{L}{2}$, the graph of $P$ against $t$ has its inflection point where $P = \frac{L}{2}$. A population that starts between $\frac{L}{2}$ and $L$ never passes $\frac{L}{2}$, so its graph has no inflection point.

Watch for the second common form, $\frac{dP}{dt} = kP(L - P)$. The carrying capacity is still the nonzero zero, $L$. But near $P = 0$ the rate is about $kL \cdot P$, so the near-exponential growth rate is $kL$, not $k$. For $\frac{dP}{dt} = 0.002P(800 - P)$, the carrying capacity is 800, growth is fastest at $P = 400$, and early growth runs at a relative rate of about $0.002 \times 800 = 1.6$.

For the first form, the explicit solution is $P(t) = \frac{L}{1 + Ae^{-kt}}$, where $A = \frac{L - P(0)}{P(0)}$. You need it only when a question asks for $P$ at a specific time.

7. Euler's method

Key idea: New $y$ = old $y$ + slope at the old point times $\Delta x$; concave up means Euler underestimates, concave down means it overestimates.

Euler's method approximates a solution by walking along short tangent lines. Start at the known point $(x_0, y_0)$ and find the slope there from the equation. Step right by $\Delta x$, and change $y$ by the slope times the step. In symbols, $y_{\text{new}} = y_{\text{old}} + m\,\Delta x$, where $m$ is $\frac{dy}{dx}$ evaluated at the old point. Then repeat from the new point.

Take $\frac{dy}{dx} = x + y$ with $y(0) = 1$, and estimate $y(1)$ with two steps of size 0.5. At $(0, 1)$ the slope is 1, so $y \approx 1 + 1(0.5) = 1.5$ at $x = 0.5$. At $(0.5, 1.5)$ the slope is 2, so $y \approx 1.5 + 2(0.5) = 2.5$ at $x = 1$. Keep a small table with columns for $x$, $y$, slope and change in $y$. It stops the most common slip, which is reusing the starting $y$ when computing the second slope.

The true value is $y(1) = 2e - 2 \approx 3.44$, so this estimate came out low. That is predictable. Here $\frac{d^2y}{dx^2} = 1 + x + y$, which is positive near these points, so the solution is concave up. Tangent lines sit below a concave-up curve, so each step lands under it. A concave-down solution gives an overestimate instead. Smaller steps shrink the error, so ten steps of 0.1 would land closer.

One step of Euler's method is the same calculation as a tangent line approximation. Exam questions often ask for both in the same problem.

8. Second-derivative analysis

Key idea: Differentiate implicitly, substitute the original $\frac{dy}{dx}$, and use the sign of $\frac{d^2y}{dx^2}$ to judge concavity, extrema and over- or underestimates.

You can find concavity without solving the equation. Differentiate $\frac{dy}{dx}$ with respect to $x$, treating $y$ as a function of $x$. Every time you differentiate a $y$, the chain rule attaches a factor of $\frac{dy}{dx}$. Then replace $\frac{dy}{dx}$ with the original right side, so the answer is in terms of $x$ and $y$ only.

Take $\frac{dy}{dx} = xy$. The product rule gives $\frac{d^2y}{dx^2} = y + x\frac{dy}{dx}$. Substituting gives $y + x(xy) = y(1 + x^2)$. Since $1 + x^2 > 0$, solution curves are concave up wherever $y > 0$ and concave down wherever $y < 0$.

The exam then asks you to use that sign. A typical stem says $(1, 2)$ is on a solution of $\frac{dy}{dx} = xy$ and asks about the tangent line there. The slope is $1 \cdot 2 = 2$, so the tangent line is $y = 2 + 2(x - 1)$, which estimates $y(1.1) \approx 2.2$. At $(1, 2)$, $\frac{d^2y}{dx^2} = 2(1 + 1) = 4 > 0$. The curve is concave up, so near $x = 1$ the tangent line lies below it, and 2.2 is an underestimate.

The same work classifies critical points of a solution. If $\frac{dy}{dx} = 0$ at a point and $\frac{d^2y}{dx^2} > 0$ there, the solution has a relative minimum. If $\frac{d^2y}{dx^2} < 0$, it has a relative maximum. For a logistic equation, $\frac{d^2P}{dt^2} = 0$ at $P = 0$, $P = \frac{L}{2}$ and $P = L$. Only $P = \frac{L}{2}$ is an inflection point, because $P = 0$ and $P = L$ are equilibrium solutions whose graphs are flat lines.

Common mistakes

Drawn from the wrong answers students actually pick on these questions.

Putting the constant in the wrong place after exponentiating, so $\frac{dy}{dx} = 2y$ with $y(0) = 3$ turns into $y = e^{2x} + 2$.

$e^{2x + C}$ equals $e^{C}e^{2x}$, so the constant multiplies: $y = Ae^{2x}$, and the initial condition gives $A = 3$. A shifted curve like $e^{2x} + 2$ passes through the right point but has the wrong slope at every point, because its derivative $2e^{2x}$ never equals $2y = 2e^{2x} + 4$.

Swapping the starting value and the rate, writing $2e^{3x}$ when the answer is $3e^{2x}$.

In $y = y_0e^{kt}$, the number in front is the value at time zero and the number in the exponent is the rate constant from the equation. Check by plugging in $x = 0$ to see the initial value, then differentiating to see the rate.

Treating $\frac{dy}{dx} = 2y$ as a constant rate and answering with a line such as $y = 3 + 2x$.

That line solves $\frac{dy}{dx} = 2$, where the rate never changes. With $y$ on the right side, the rate grows as $y$ grows, so the solution through $(0, 3)$ must be exponential. Look at which variables appear on the right before you pick a shape.

Reading a slope field at the wrong coordinate, such as giving a slope of 1, $-1$ or "undefined" along the $y$-axis for $\frac{dy}{dx} = x$.

On the $y$-axis $x = 0$, so the slope is 0 at every point there. Slope 1 occurs only on the line $x = 1$, and slope $-1$ only on $x = -1$. Nothing in $\frac{dy}{dx} = x$ is ever undefined. Name the coordinate that is fixed before you substitute.

Picking the wrong exponent, for example choosing $y = e^{2x}$ as a solution of $\frac{dy}{dx} = 2xy$, or mis-differentiating $e^{2x}$ as $2xe^{2x}$ to make it fit.

The derivative of $e^{2x}$ is $2e^{2x} = 2y$, which has no factor of $x$. To get $2xy$, the exponent must be $x^2$, because the chain rule gives $\frac{d}{dx}e^{x^2} = 2xe^{x^2} = 2xy$. The chain rule multiplies by the derivative of the exponent, so differentiate the exponent you actually have, and check that the factor it produces matches the equation.

Accepting a function because it looks like the right type, such as $e^{-2x} + 5$ for $\frac{dy}{dx} = -2y$ or $\sin(4x)$ for $y'' + 4y = 0$.

Substitute into both sides and simplify. For $e^{-2x} + 5$, the right side picks up a $-10$ that the derivative lacks. For $\sin(4x)$, $y'' = -16\sin(4x)$, so $y'' + 4y = -12\sin(4x)$, not 0. Only an exact match for every $x$ counts.

How this unit shows up on the exam

Expect this unit in both multiple-choice sections and in the free-response section. Multiple-choice stems tend to be short. "Which function is a solution of…" asks you to verify by substitution. "Which slope field corresponds to…" asks you to test the axes and the zero-slope lines. "The solution with $y(0) = 3$ is…" asks for a quick separation. BC items add logistic questions, such as the long-run limit of $P$ or the population where growth is fastest, plus Euler's method tables. Modeling stems hide the equation inside a sentence about proportional rates, so translate before you solve.

A differential equations question has often appeared in the free-response section, built from several linked parts. One common pattern runs like this: sketch a solution on a given slope field, write a tangent line and use it to estimate, find $\frac{d^2y}{dx^2}$ to decide whether the estimate is too high or too low, and then find the particular solution by separation. BC versions may swap in Euler's method or a logistic limit.

Scoring rewards visible steps. The separation part is usually graded in stages: separating, finding both antiderivatives, including the constant and using the initial condition, and then solving for $y$. Scoring guides have typically capped responses that leave out the constant of integration, so the correct-looking work after that point earns little. An over- or underestimate answer needs a reason tied to the sign of $\frac{d^2y}{dx^2}$. A bare "underestimate" with no concavity argument usually loses the point. Write each Euler step as its own line of arithmetic so your method is clear.

How the exam actually asks it

Real items from the AP Calculus BC bank, easier first. The answer is marked, and every wrong choice is explained — because knowing why a distractor is tempting is most of the work.

Worked example 1Easier
In the slope field for , all segments along the -axis have slope:
  1. ACorrect
  2. B
  3. C
  4. Dundefined

Why A is right

Along the -axis, . Since , the slope at every point on the -axis is 0 (horizontal segments). Separating variables and applying the initial condition determine the solution. The constants of integration and boundary condition are what make the solution specific.
Why the other 3 choices miss
B
The slope equals , not 1. It's only 1 along the vertical line . This distractor usually comes from separating variables incorrectly or applying the initial condition too early. The correct solution appears after the differential equation is solved in the right order.
C
The slope is only along . On the -axis, . This distractor usually comes from separating variables incorrectly or applying the initial condition too early. The correct solution appears after the differential equation is solved in the right order.
D
The slope field is defined everywhere. has no restrictions. This distractor usually comes from separating variables incorrectly or applying the initial condition too early. The correct solution appears after the differential equation is solved in the right order.
Worked example 2Easier
Which of the following functions is a solution of ?
  1. A
  2. BCorrect
  3. C
  4. D

Why B is right

For , . Both sides match. Separating variables and applying the initial condition determine the solution. The constants of integration and boundary condition are what make the solution specific.
Why the other 3 choices miss
A
Here , which gives , not . This distractor usually comes from separating variables incorrectly or applying the initial condition too early. The correct solution appears after the differential equation is solved in the right order.
C
, but . Not equal. This distractor usually comes from separating variables incorrectly or applying the initial condition too early. The correct solution appears after the differential equation is solved in the right order.
D
, but . Not equal. This distractor usually comes from separating variables incorrectly or applying the initial condition too early. The correct solution appears after the differential equation is solved in the right order.
Worked example 3Easier
Which function satisfies ?
  1. ACorrect
  2. B
  3. C
  4. D

Why A is right

For , . The leading constant is along for the ride. Separating variables and applying the initial condition determine the solution. The constants of integration and boundary condition are what make the solution specific.
Why the other 3 choices miss
B
— the sign of the exponent is wrong; this solves . This distractor usually comes from separating variables incorrectly or applying the initial condition too early. The correct solution appears after the differential equation is solved in the right order.
C
, but . Not equal. This distractor usually comes from separating variables incorrectly or applying the initial condition too early. The correct solution appears after the differential equation is solved in the right order.
D
, but . The breaks it. This distractor usually comes from separating variables incorrectly or applying the initial condition too early. The correct solution appears after the differential equation is solved in the right order.
Worked example 4Easier
Which function is a solution of for ?
  1. A
  2. B
  3. C
  4. DCorrect

Why D is right

For , and . Match. (Any line through the origin works.). Separating variables and applying the initial condition determine the solution. The constants of integration and boundary condition are what make the solution specific.
Why the other 3 choices miss
A
, but . This distractor usually comes from separating variables incorrectly or applying the initial condition too early. The correct solution appears after the differential equation is solved in the right order.
B
, but . Not equal. This distractor usually comes from separating variables incorrectly or applying the initial condition too early. The correct solution appears after the differential equation is solved in the right order.
C
, but . Not equal. This distractor usually comes from separating variables incorrectly or applying the initial condition too early. The correct solution appears after the differential equation is solved in the right order.

Can you do all of these?

Tick what you can do without looking. Anything left unticked is where to go back to.

0 of 10 ticked

Ready to test yourself?

Open practice pulls from the 40 free questions in this unit. The other 238 come with the one-time AP purchase, which unlocks every AP course.

Official topic list

The official course framework breaks this unit into 9 numbered topics.

  1. 7.1Modeling Situations with Differential Equations
  2. 7.2Verifying Solutions for Differential Equations
  3. 7.3Sketching Slope Fields
  4. 7.4Reasoning Using Slope Fields
  5. 7.5Approximating Solutions Using Euler's Method
  6. 7.6Finding General Solutions Using Separation of Variables
  7. 7.7Finding Particular Solutions Using Initial Conditions and Separation of Variables
  8. 7.8Exponential Models with Differential Equations
  9. 7.9Logistic Models with Differential Equations

Key terms in Differential Equations

Ordered by how often our reviewed questions test them. Open any term to see the questions that use it.

The rest of AP Calculus BC

Every unit with its share of the exam. You are on Unit 8.

  1. 1Pre-AP Foundations7% of exam
  2. 2Limits and Continuity5% of exam
  3. 3Definition of the Derivative11% of exam
  4. 4Differentiation Rules11% of exam
  5. 5Applications of Derivatives13% of exam
  6. 6The Integral16% of exam
  7. 7Applications of Integration10% of exam
  8. 8Differential Equations8% of exam
  9. 9Parametric, Polar, and Vectors8% of exam
  10. 10Sequences and Series10% of exam