Skip to content
AP Environmental Science · Atmospheric, Aquatic, and Terrestrial Pollution

Secondary treatment

Secondary treatment appears in 3 reviewed AP Environmental Science questions and sits in Atmospheric, Aquatic, and Terrestrial Pollution. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Secondary treatment is tested

Example 1Easier
In a municipal wastewater treatment plant, what is the primary purpose of the secondary treatment stage?
  1. ATo remove large solid debris such as rags, sticks, and grit through physical screening
  2. BTo use microorganisms in biological processes to decompose dissolved organic matterCorrect
  3. CTo add chlorine or ultraviolet light to eliminate pathogenic bacteria and viruses
  4. DTo precipitate phosphorus and nitrogen through chemical coagulation and flocculation

Why B is right

Secondary treatment uses aerobic biological processes, such as activated sludge or trickling filters, in which microorganisms break down dissolved and suspended organic matter. This stage significantly reduces the biological oxygen demand (BOD) of the effluent.
Why the other 3 choices miss
A
Incorrect because physical screening and grit removal occur during primary treatment (or preliminary treatment), not during the secondary stage.
C
Incorrect because disinfection with chlorine or UV light occurs after secondary treatment as a separate disinfection step before discharge.
D
Incorrect because chemical removal of phosphorus and nitrogen is considered tertiary (advanced) treatment, which goes beyond standard secondary treatment.
Example 2Medium
A city's wastewater treatment plant processes 100 million liters per day. Primary treatment removes 60% of suspended solids, and secondary (biological) treatment removes an additional 30% of the remaining solids. What percentage of the original suspended solids remains after both treatment stages?
  1. A28%Correct
  2. B12%
  3. C10%
  4. D40%

Why A is right

After primary treatment: 100% - 60% = 40% of solids remain. Secondary treatment removes 30% of the remaining 40%: 0.30 x 40% = 12 percentage points removed. After both stages: 40% - 12% = 28% of the original solids remain. This demonstrates why tertiary treatment is sometimes needed for high-quality effluent.
Why the other 3 choices miss
B
Incorrect. 12% represents the amount removed by secondary treatment (30% of the 40% remaining after primary), not the final amount remaining after both stages.
C
Incorrect. 10% would result from removing 90% of the original solids, which would require secondary treatment to remove 75% of remaining solids rather than 30%.
D
Incorrect. 40% is the amount remaining after primary treatment alone, before secondary treatment removes an additional 30% of those remaining solids.

Studied alongside

Other concepts from Atmospheric, Aquatic, and Terrestrial Pollution.