Skip to content
AP Environmental Science · Atmospheric, Aquatic, and Terrestrial Pollution

Water treatment

Water treatment appears in 3 reviewed AP Environmental Science questions and sits in Atmospheric, Aquatic, and Terrestrial Pollution. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Water treatment is tested

Example 1Easier
In a municipal wastewater treatment plant, what is the primary purpose of the secondary treatment stage?
  1. ATo remove large solid debris such as rags, sticks, and grit through physical screening
  2. BTo use microorganisms in biological processes to decompose dissolved organic matterCorrect
  3. CTo add chlorine or ultraviolet light to eliminate pathogenic bacteria and viruses
  4. DTo precipitate phosphorus and nitrogen through chemical coagulation and flocculation

Why B is right

Secondary treatment uses aerobic biological processes, such as activated sludge or trickling filters, in which microorganisms break down dissolved and suspended organic matter. This stage significantly reduces the biological oxygen demand (BOD) of the effluent.
Why the other 3 choices miss
A
Incorrect because physical screening and grit removal occur during primary treatment (or preliminary treatment), not during the secondary stage.
C
Incorrect because disinfection with chlorine or UV light occurs after secondary treatment as a separate disinfection step before discharge.
D
Incorrect because chemical removal of phosphorus and nitrogen is considered tertiary (advanced) treatment, which goes beyond standard secondary treatment.

Studied alongside

Other concepts from Atmospheric, Aquatic, and Terrestrial Pollution.