Skip to content
AP Environmental Science · Energy Resources and Consumption

Wind energy

Wind energy appears in 3 reviewed AP Environmental Science questions and sits in Energy Resources and Consumption. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Wind energy is tested

Example 1Medium
Wind turbines convert kinetic energy of moving air into electricity. A modern utility-scale wind turbine has a rated capacity of 3 MW and a capacity factor of 35%. How much electricity does it generate in one year (8,760 hours)?
  1. A16,380 MWh
  2. B3,066 MWh
  3. C26,280 MWh
  4. D9,198 MWhCorrect

Why D is right

Annual generation = Rated capacity x Hours in year x Capacity factor = 3 MW x 8,760 hours x 0.35 = 9,198 MWh per year. The capacity factor (35%) reflects the fact that wind does not blow at optimal speeds continuously — the turbine operates below its rated capacity much of the time and is idle during calm conditions.
Why the other 3 choices miss
A
Incorrect. 16,380 MWh would result from using approximately 62% capacity factor, which is unrealistically high for wind power. Even the best wind sites rarely exceed 50% capacity factor.
B
Incorrect. 3,066 MWh would result from using only a ~12% capacity factor, which is unrealistically low for a modern utility-scale wind turbine in a good wind resource area.
C
Incorrect. 26,280 MWh represents the theoretical maximum if the turbine operated at full rated capacity 100% of the time (capacity factor = 100%), which is physically impossible for wind.

Studied alongside

Other concepts from Energy Resources and Consumption.