Skip to content

Unit 8 of 8

Geometry and Trigonometry

9% of the exam148 reviewed questions36 key terms17 min read

Geometry and Trigonometry is worth about 9% of the PSAT/NMSQT exam. Our bank tests it with 148 reviewed questions across 36 distinct ideas — 69 easier, 71 medium and 8 harder.

On this page · 11 sections

Geometry and Trigonometry on the PSAT/NMSQT tests a short list of formulas, and the hard part is choosing the right one. Most questions give you a rectangle, a triangle, a circle or a box with a few measurements. Then they ask for one quantity: an area, a missing side, an angle, a volume or a radius. About half of our bank's questions in this unit are rated easy, and nearly all the rest are medium. So the points are there to collect, but only if you don't mix up perimeter with area or circumference with area.

The unit rests on one shape more than any other: the right triangle. The Pythagorean theorem, the special 30-60-90 and 45-45-90 triangles, SOH CAH TOA, the diagonal of a rectangle and the distance between two points all use the same right-angle relationship. Circles connect to it too, because a radius drawn to a point on a circle is the hypotenuse of a right triangle. That is why the equation of a circle looks like the Pythagorean theorem.

The rest of the unit is about measuring. Perimeter and circumference measure length in units. Area measures flat space in square units. Volume measures space in cubic units. If you track which of the three a question wants, and which formula produces it, most wrong answers stop looking tempting. Those wrong answers are mostly built from the right numbers fed into the wrong formula.

The unit in a minute

One line per topic. Tap any line for the full notes.

  1. Area and perimeter of rectangles, squares and trianglesPerimeter adds sides; area multiplies. To go from perimeter to area, find the side length first.
  2. Volume, surface area and scale factorVolume is base area times height. When lengths scale by k, areas scale by k² and volumes by k³.
  3. Angles: triangles, straight lines and parallel linesTriangles and straight lines both total 180°; parallel lines cut by a transversal create at most two angle sizes, which are supplementary.
  4. The Pythagorean theorem, diagonals and distanceSquare the legs, add, then take the square root. Look for hidden right triangles in diagonals, heights and coordinate gaps.
  5. Special right triangles: 45-45-90 and 30-60-9045-45-90 sides are s, s, s√2; 30-60-90 sides are x, x√3, 2x, with the short side opposite 30°.
  6. SOH CAH TOA: sine, cosine and tangentLabel opposite, adjacent and hypotenuse from the given angle, then choose the ratio that links the side you have to the side you need.
  7. Circles: circumference, area, arcs and inscribed anglesFind the radius first; arcs and sectors use the fraction central angle ÷ 360 applied to circumference or area.
  8. The equation of a circle and similar figuresIn (x − h)² + (y − k)² = r², flip the signs for the centre and take the square root for the radius; similar figures share one side ratio.
Grind Geometry and Trigonometry questionsAlready know this? Skip the notes and prove it.

The big ideas

Length, area and volume are different kinds of measurement

Perimeter adds lengths, so its unit is cm. Area multiplies two lengths, so its unit is cm². Volume multiplies three lengths, so its unit is cm³. A 12 by 5 rectangle has perimeter 34 and area 60, and the test will offer you both. Before you calculate, ask which kind of measurement the question wants. The units in the answer choices often tell you, but trap choices sometimes carry the right unit on the wrong number.

The right triangle is the engine of the unit

Whenever a figure has a right angle, you have three tools. The Pythagorean theorem links the three sides. The special right triangles give exact side ratios for 30°, 45° and 60° angles. Sine, cosine and tangent link a side ratio to an angle. Many figures hide a right triangle, such as the diagonal of a rectangle, the height of an isosceles triangle, or the gap between two points on a graph. Drawing that triangle in is often the whole solution.

Fixed totals let you find missing pieces

Some quantities in geometry never change. The angles of a triangle sum to 180°. Angles on a straight line sum to 180°. A full circle is 360°. Because these totals are fixed, one unknown angle can always be found by subtraction from the total. The same logic runs through circles, where an arc is a fraction of 360° and that same fraction applies to the circumference and the area.

Scaling changes length, area and volume at different rates

If you multiply every length of a figure by k, perimeter multiplies by k, area by k² and volume by k³. Similar triangles are the same idea: equal angles force all sides into the same ratio. This one rule explains shadow problems, map problems and questions about doubling a radius.

Study notes

8 topics. Each one opens with its key idea, then the detail you need to use it.

1. Area and perimeter of rectangles, squares and triangles

Key idea: Perimeter adds sides; area multiplies. To go from perimeter to area, find the side length first.

Perimeter is the distance around a shape, so you add every side. A rectangle's perimeter is 2(l + w). Area is the number of unit squares that cover the shape, so you multiply. A rectangle's area is l × w, which is why a 12 cm by 5 cm rectangle covers 60 cm². That is 12 squares in each of 5 rows.

A triangle is half of a rectangle drawn around it, so its area is ½ × base × height. The height must be perpendicular to the base. On a slanted triangle, the height is the dashed line meeting the base at 90°, not a slanted side. A triangle with base 10 and height 6 has area 30, not 60.

A square has four equal sides, so perimeter is 4s and area is s². Questions often hand you one and ask for the other. Then you go through the side length. If a square has perimeter 28, its side is 28 ÷ 4 = 7, so its area is 7² = 49. Don't try to jump straight from perimeter to area.

For a composite shape, like an L-shape or a rectangle with a triangle cut out, split it into rectangles and triangles. Add or subtract their areas. Each formula is simple, so the skill is in the bookkeeping.

2. Volume, surface area and scale factor

Key idea: Volume is base area times height. When lengths scale by k, areas scale by k² and volumes by k³.

Volume measures the space inside a solid. For a rectangular prism (a box), V = l × w × h, so a 5 by 4 by 3 box holds 60 cubic units. The idea behind it is the base area times the height: 20 square units stacked 3 layers high.

A cylinder uses the same idea with a circular base. Its volume is V = πr²h. Square the radius first, then multiply by π and the height. A cylinder with radius 4 and height 10 has V = π × 16 × 10 = 160π.

Surface area is different. It is the total area of the outside faces, in square units. A box has three pairs of matching faces, so its surface area is 2(lw + wh + lh). For the 5 by 4 by 3 box, that is 2(20 + 12 + 15) = 94. Questions about paint or wrapping want surface area. Questions about filling or holding want volume.

Scale factor ties these together. If every length is multiplied by k, area grows by k² and volume grows by k³. Double the edges of a cube and its volume becomes 8 times larger. Double only a cylinder's radius and its volume becomes 4 times larger, because r is squared but h is unchanged. Triple only the height and the volume triples.

3. Angles: triangles, straight lines and parallel lines

Key idea: Triangles and straight lines both total 180°; parallel lines cut by a transversal create at most two angle sizes, which are supplementary.

Every triangle's angles add to 180°. If two angles are 50° and 70°, the third is 180 − 50 − 70 = 60°. Subtract both known angles from 180, not one from the other.

Supplementary angles add to 180°, because together they form a straight line. If one angle on a line is 115°, its neighbour is 65°. Vertical angles, the opposite pair where two lines cross, are always equal. A full turn around a point is 360°.

When a transversal cuts two parallel lines, it creates only two angle sizes. Every acute angle in the figure is equal, and every obtuse angle is equal. Any acute angle and any obtuse angle add to 180°. So once you know one angle, you know all eight. The one exception is a transversal perpendicular to the parallel lines, which makes all eight angles 90°.

An isosceles triangle has two equal sides, and the angles opposite them are equal too. If the top angle is 40°, the two base angles share the remaining 140°, so each is 70°. An equilateral triangle has three 60° angles.

One shortcut saves time. An exterior angle of a triangle equals the sum of the two interior angles that are not next to it. That follows from the straight-line rule and the 180° rule working together.

4. The Pythagorean theorem, diagonals and distance

Key idea: Square the legs, add, then take the square root. Look for hidden right triangles in diagonals, heights and coordinate gaps.

In a right triangle, a² + b² = c², where c is the hypotenuse, the side opposite the right angle. It is always the longest side. To find the hypotenuse, add the squares of the legs and take the square root. Legs 9 and 12 give 81 + 144 = 225, so the hypotenuse is 15. To find a leg, subtract instead. With hypotenuse 17 and leg 8, the other leg is √(289 − 64) = √225 = 15.

Learn the common whole-number triples so you can spot them: 3-4-5, 5-12-13, 8-15-17 and 7-24-25. Multiples work too, so 6-8-10 and 9-12-15 are also right triangles.

The theorem is hiding in many figures. The diagonal of a rectangle splits it into two right triangles, so a 9 by 12 rectangle has a 15-unit diagonal. The height of an isosceles triangle cuts its base in half and makes two right triangles.

In coordinate geometry, the distance between two points is a hypotenuse. From (1, 2) to (7, 10), the horizontal change is 6 and the vertical change is 8. So the distance is √(36 + 64) = 10. The distance formula is just this triangle written in symbols. The midpoint is the average of the x-values and the average of the y-values, here (4, 6).

5. Special right triangles: 45-45-90 and 30-60-90

Key idea: 45-45-90 sides are s, s, s√2; 30-60-90 sides are x, x√3, 2x, with the short side opposite 30°.

Two right triangles appear so often that their side ratios are printed on the reference sheet. Know why they work, so you can use them quickly.

A 45-45-90 triangle is half of a square cut along its diagonal. Its legs are equal, so the sides are in the ratio s : s : s√2. A leg of 5 gives a hypotenuse of 5√2. Going the other way, divide by √2. A square with a 10-unit diagonal has a side of 10/√2 = 5√2, so its area is (5√2)² = 50.

A 30-60-90 triangle is half of an equilateral triangle. The side opposite 30° is the shortest, x. The hypotenuse is twice that, 2x. The side opposite 60° is x√3. If the short leg is 4, the hypotenuse is 8 and the long leg is 4√3.

The common error is matching sides to the wrong angles. The shortest side is always opposite the smallest angle, and the hypotenuse is always opposite the 90° angle. If a question gives you the hypotenuse of a 30-60-90 triangle as 12, halve it first to get the short leg of 6. Then the long leg is 6√3.

Answer choices with √2 or √3 in them are a strong hint that one of these triangles is involved.

6. SOH CAH TOA: sine, cosine and tangent

Key idea: Label opposite, adjacent and hypotenuse from the given angle, then choose the ratio that links the side you have to the side you need.

Trigonometry names the ratios of sides in a right triangle, measured from one acute angle. SOH CAH TOA is the memory aid. Sine is opposite over hypotenuse. Cosine is adjacent over hypotenuse. Tangent is opposite over adjacent. "Opposite" and "adjacent" change depending on which angle you stand at, but the hypotenuse never changes.

A common question gives one ratio and asks for another. If sin A = 8/17, sketch a triangle with opposite side 8 and hypotenuse 17. The Pythagorean theorem gives the adjacent side: √(289 − 64) = 15. So cos A = 15/17 and tan A = 8/15.

You can also use a ratio to set up an expression for a side. Suppose the side adjacent to a 35° angle is 12. Cosine links adjacent and hypotenuse, so cos 35° = 12/h, and h = 12/cos 35°. The opposite side uses tangent instead: 12 × tan 35°. Pick the ratio that contains the side you know and the side you want.

One identity shows up often. In a right triangle the two acute angles add to 90°, and the opposite side of one is the adjacent side of the other. So sin x° = cos(90 − x)°. If sin 28° = k, then cos 62° = k too.

You may also see radians: 180° equals π radians, so 90° is π/2.

7. Circles: circumference, area, arcs and inscribed angles

Key idea: Find the radius first; arcs and sectors use the fraction central angle ÷ 360 applied to circumference or area.

Every circle formula starts from the radius. Circumference is C = 2πr, the distance around. Area is A = πr², the space inside. A circle with radius 5 has circumference 10π and area 25π. If you are given the diameter, halve it before using the area formula.

You can also work backwards. If the area is 64π, then r² = 64 and r = 8. If the circumference is 18π, then 2r = 18 and r = 9.

An arc or sector is a fraction of the whole circle. That fraction is the central angle over 360°. In a circle with radius 10, a 72° central angle is 72/360 = 1/5 of the circle. So the arc length is 1/5 of 20π, which is 4π. The sector area is 1/5 of 100π, which is 20π. Use the same fraction for both, then apply it to the right whole.

The inscribed angle theorem links two kinds of angles. A central angle has its vertex at the centre and equals its arc. An inscribed angle has its vertex on the circle and equals half its arc. So an inscribed angle that intercepts a 100° arc measures 50°. An angle inscribed in a semicircle, standing on a diameter, is always 90°. A radius drawn to a point of tangency is perpendicular to the tangent line.

8. The equation of a circle and similar figures

Key idea: In (x − h)² + (y − k)² = r², flip the signs for the centre and take the square root for the radius; similar figures share one side ratio.

A circle with centre (h, k) and radius r has the equation (x − h)² + (y − k)² = r². It is the Pythagorean theorem for every point on the circle. The horizontal and vertical gaps from the centre are the legs, and the radius is the hypotenuse.

Watch the signs. In (x + 2)² + (y − 3)² = 16, the centre is (−2, 3), and the radius is 4, not 16. Sometimes the equation is expanded, like x² + y² − 6x + 4y − 12 = 0. Complete the square on each variable. Half of −6 is −3, so add 9. Half of 4 is 2, so add 4. Adding 9 and 4 to both sides gives (x − 3)² + (y + 2)² = 25. The centre is (3, −2) and the radius is 5.

Similar figures have equal angles and proportional sides. Two triangles are similar if two pairs of angles match, because the third angles then match too. This is common when a line inside a triangle runs parallel to one side. Set up a proportion with matching sides in the same order. A 6-foot person casts a 4-foot shadow while a tree casts a 30-foot shadow, so 6/4 = h/30 and the tree is 45 feet tall.

Congruent triangles are similar with a ratio of 1, so the triangles are the same size. SSS, SAS, ASA and AAS prove congruence. Matching angles alone do not.

Common mistakes

Drawn from the wrong answers students actually pick on these questions.

Adding or averaging the legs of a right triangle instead of using the Pythagorean theorem. For legs 6 and 8, students pick 14 (the sum) or 7 (the average).

The hypotenuse is √(a² + b²), so legs 6 and 8 give √100 = 10. The hypotenuse is always longer than either leg but shorter than their sum. Any answer equal to the sum is impossible.

Giving the perimeter, or the sum of length and width, when the question asks for area. For a 12 by 5 rectangle, students choose 34 (the perimeter) or 17 (12 + 5).

Area multiplies the dimensions: 12 × 5 = 60. Adding lengths always gives a length, never an area. Check whether the question asks for the distance around (perimeter) or the space inside (area).

Picking a reciprocal or the wrong ratio in trigonometry. Given sin A = 3/5 and asked for cos A, students choose 5/3, 5/4 or 3/4.

Find the missing side first (here 4), then apply CAH: adjacent over hypotenuse = 4/5. Sine and cosine of an acute angle are always less than 1, because the hypotenuse is the longest side. So any value above 1 is wrong. 3/4 is tangent, opposite over adjacent.

Mixing up circumference and area. With radius 7, students compute π × 7 (dropping the 2), π × 49 (the area), or just 7² = 49 (dropping π).

Circumference is 2πr = 14π, about 43.98. Area is πr² = 49π. Write the formula before plugging in. Then check the units: circumference is a length and area is in square units.

Finding volume with an area formula. For a 5 by 4 by 3 box, students give 94 (the surface area), 47 (one of each face added up) or a doubled product.

Volume is l × w × h = 60 cubic units. Surface area adds the areas of the faces and measures the outside, in square units. Ask whether the question is about filling the solid or covering it.

Skipping the square root or a step with angle totals. A circle with area 36π gets radius 18 (36 ÷ 2, as if the area were the circumference 2πr) or 36 (forgetting to take the square root). A triangle with angles 55° and 80° gets a third angle of 25° (80 − 55, subtracting one given angle from the other) or 125° (180 − 55, forgetting the second angle).

Divide out π, then take the square root: r² = 36, so r = 6. For angles, subtract both known angles from 180: 180 − 55 − 80 = 45. Check by plugging back in. π(6)² = 36π, and 55 + 80 + 45 = 180.

How this unit shows up on the exam

On the PSAT/NMSQT, Geometry and Trigonometry is the smallest of the four Math domains. Expect roughly 4 to 6 of the 44 Math questions, spread across the two 22-question, 35-minute modules in Bluebook. The test is adaptive, so a strong first module leads to a harder second module. There the geometry items involve more steps, but they use the same formulas.

Most stems follow a few patterns. Some give a shape with labelled measurements and ask for one quantity: "What is the area of the triangle?" Some describe a shape in words with no figure, like "A square has a perimeter of 36 cm." That is your cue to sketch it yourself. Some ask for an expression rather than a number, such as "Which expression gives the length of the hypotenuse?" There the choices look like 10 cos 40°, 10/cos 40° and 10 tan 40°, and you are being tested on which ratio to use. Circle equations may appear in standard form or in expanded form. If the equation is expanded, complete the square to find the centre or the radius.

About a quarter of Math questions are student-produced responses with no choices. You can't type π, so these stems often say "The volume is kπ cubic units. What is the value of k?" Enter only the coefficient. Fractions and decimals are both accepted, so 4/5 or 0.8 both work.

Two tools help. A reference sheet gives the area, circumference and volume formulas, the Pythagorean theorem, both special right triangles, and the facts that a circle has 360° and a triangle's angles sum to 180°. The built-in Desmos calculator can graph a circle equation and show its centre and radius, or find trig values in degree mode. Examiners reward choosing the right relationship. The wrong choices are almost always correct arithmetic applied to the wrong formula, so a careful second look at what is being asked pays off.

How the exam actually asks it

Real items from the PSAT/NMSQT bank, easier first. The answer is marked, and every wrong choice is explained — because knowing why a distractor is tempting is most of the work.

Worked example 1Easier
A right triangle has legs of length 6 and 8. What is the length of the hypotenuse?
  1. A10Correct
  2. B14
  3. C12
  4. D7

Why A is right

Using the Pythagorean theorem: c^2 = 6^2 + 8^2 = 36 + 64 = 100, so c = sqrt(100) = 10. The geometry or trigonometry follows directly from the given measurements and relationships.
Why the other 3 choices miss
B
Incorrect because 14 is the sum of the two legs, not the hypotenuse.
C
Incorrect because 12 might come from adding the legs (6 + 8 = 14) or other incorrect methods; the correct answer is 10.
D
Incorrect because 7 is the average of 6 and 8, not the hypotenuse. The Pythagorean theorem must be used.
Worked example 2Easier
A rectangle has a length of 12 cm and a width of 5 cm. What is the area of the rectangle?
  1. A34 cm^2
  2. B60 cm^2Correct
  3. C17 cm^2
  4. D72 cm^2

Why B is right

The area of a rectangle is length × width, which counts the square units that cover it. Here that is 12 cm × 5 cm = 60 cm^2, so the answer is (B). Area is a product of the two dimensions. Adding them gives a length, not an area, and that is the mistake behind (A) and (C).
Why the other 3 choices miss
A
34 cm^2 is the perimeter, 2(12 + 5) = 34. That measures the distance around the rectangle, not the space inside it.
C
17 cm^2 is the length and width added together (12 + 5 = 17) when they should be multiplied.
D
72 cm^2 comes from taking the width as 6 instead of 5 (12 × 6 = 72), which is the same as adding one extra 12 cm row to the correct 60.
Worked example 3Easier
A circle has a radius of 7. What is its circumference? (Use pi ≈ 3.14)
  1. A21.98
  2. B43.96Correct
  3. C153.86
  4. D49

Why B is right

The circumference of a circle is C = 2πr, which is the same as π times the diameter. The radius is 7, so the diameter is 14, and C = 3.14 × 14 = 43.96. The answer is (B).
Why the other 3 choices miss
A
21.98 = 3.14 × 7 is π times the radius. That leaves out the factor of 2, so it is only half the circumference.
C
153.86 = 3.14 × 7² = 3.14 × 49 is the area of the circle (πr²), not its circumference.
D
49 = 7² just squares the radius. It drops π and confuses the circumference formula with part of the area formula.
Worked example 4Easier
Two angles in a triangle measure 55° and 80°. What is the measure of the third angle?
  1. A35°
  2. B45°Correct
  3. C40°
  4. D50°

Why B is right

The sum of angles in a triangle is 180°. Third angle = 180 - 55 - 80 = 45°. The geometry or trigonometry follows directly from the given measurements and relationships.
Why the other 3 choices miss
A
Incorrect because 35° = 80° - 45°; this subtracts one angle from another rather than from 180°.
C
Incorrect because 40° may result from a subtraction error: 180 - 55 - 80 computed as 180 - 140 = 40.
D
Incorrect because 50° = 180 - 55 - 75 (using 75 instead of 80 for one of the angles).

Can you do all of these?

Tick what you can do without looking. Anything left unticked is where to go back to.

0 of 10 ticked

Ready to test yourself?

Open practice pulls from all 148 questions in this unit. No account, no card — you get the reasoning the moment you answer.

Key terms in Geometry and Trigonometry

Ordered by how often our reviewed questions test them. Open any term to see the questions that use it.

The rest of PSAT/NMSQT

Every unit with its share of the exam. You are on Unit 8.

  1. 1Craft and Structure14% of exam
  2. 2Information and Ideas14% of exam
  3. 3Expression of Ideas13.5% of exam
  4. 4Standard English Conventions13.5% of exam
  5. 5Algebra13.5% of exam
  6. 6Advanced Math13.5% of exam
  7. 7Problem Solving and Data Analysis9% of exam
  8. 8Geometry and Trigonometry9% of exam