Skip to content
AP Environmental Science · Global Change

Mitigation

Mitigation appears in 5 reviewed AP Environmental Science questions and sits in Global Change. Below are worked examples showing exactly how the exam tests it, with the answer marked and every distractor explained.

How Mitigation is tested

Example 1Medium
A homeowner discovers that their basement has elevated radon levels measured at 8 pCi/L. The EPA recommends action when radon levels exceed 4 pCi/L. Which of the following is the most appropriate remediation strategy?
  1. AOpening basement windows to dilute radon concentration through natural ventilation
  2. BPlacing activated carbon air filters in the basement to absorb radon particles
  3. CApplying a sealant to basement walls to prevent radon from entering through concrete pores
  4. DInstalling a sub-slab depressurization system that vents radon outdoorsCorrect

Why D is right

Sub-slab depressurization (also called active soil depressurization) is the most effective and EPA-recommended radon mitigation method. It uses a pipe and fan system to draw radon gas from beneath the foundation slab and vent it to the outside, preventing it from entering the living space.
Why the other 3 choices miss
A
Incorrect because while ventilation can temporarily reduce radon concentration, it is not a reliable long-term solution, especially in cold climates where windows cannot remain open year-round.
B
Incorrect because radon is a noble gas, not a particle, and standard activated carbon air filters are not designed for continuous radon removal in residential settings.
C
Incorrect because while sealing cracks can be part of a mitigation strategy, sealants alone are insufficient to reduce radon levels significantly since radon can permeate through intact concrete.
Example 2Harder
A policy analyst is evaluating strategies to reduce greenhouse gas emissions from the transportation sector. Which approach would be most effective at achieving large-scale emissions reductions in the shortest timeframe?
  1. ABanning all fossil fuel vehicles nationwide immediately without providing alternative transportation options
  2. BEncouraging individuals to voluntarily reduce their driving through public awareness campaigns
  3. CInvesting exclusively in hydrogen fuel cell research for passenger vehicles
  4. DImplementing fuel efficiency standards while expanding public transit and electric vehicle infrastructureCorrect

Why D is right

A combined approach of implementing stricter fuel efficiency standards (which reduce emissions from the existing fleet as new vehicles enter the market), expanding public transit (which reduces the number of vehicle-miles traveled), and building electric vehicle charging infrastructure (which accelerates EV adoption) addresses multiple aspects of transportation emissions simultaneously. This multi-pronged strategy is practical, scalable, and can achieve measurable reductions in a relatively short timeframe.
Why the other 3 choices miss
A
Incorrect because an immediate ban without alternatives would cause severe economic disruption, would be politically and practically impossible to implement, and could paradoxically delay emissions reductions by generating backlash against climate policy.
B
Incorrect because voluntary behavior change through awareness campaigns alone has historically produced only modest reductions in driving and emissions. Without structural changes to transportation systems, individual voluntary actions are insufficient for large-scale reductions.
C
Incorrect because hydrogen fuel cell technology for passenger vehicles is still in early stages of commercialization and lacks widespread infrastructure. Investing exclusively in one unproven technology delays emissions reductions and ignores available solutions.
Example 3Easier
Carbon capture and storage (CCS) technology aims to reduce atmospheric CO2 levels. Which of the following correctly describes the CCS process?
  1. ACO2 is captured from industrial exhaust, compressed, and injected into deep geological formations for long-term storageCorrect
  2. BAtmospheric CO2 is converted to solid carbon through electrolysis and used as construction material
  3. CIndustrial CO2 emissions are converted to oxygen through catalytic converters installed on smokestacks
  4. DCO2 is filtered from the atmosphere using genetically modified algae that permanently incorporate carbon into their cell walls

Why A is right

Carbon capture and storage involves three steps: capturing CO2 from large point sources such as power plants or industrial facilities, compressing it into a dense fluid, and transporting it to deep underground geological formations (such as depleted oil reservoirs, saline aquifers, or basalt formations) where it is injected for permanent storage.
Why the other 3 choices miss
B
Incorrect because while some carbon utilization technologies exist, standard CCS does not convert CO2 to solid carbon through electrolysis for construction; the primary approach is geological injection.
C
Incorrect because catalytic converters on smokestacks cannot convert CO2 to oxygen; that would require energy-intensive processes, and catalytic converters are designed for vehicle exhaust pollutants like CO and NOx, not CO2.
D
Incorrect because while algae-based carbon capture is a research area, it is not the standard CCS technology; CCS specifically refers to capture from point sources and geological storage.

Studied alongside

Other concepts from Global Change.