Skip to content

Unit 1 of 8

Chemistry of Life

9% of the exam272 reviewed questions112 key terms18 min read

Chemistry of Life is worth about 9% of the AP Biology exam. Our bank tests it with 272 reviewed questions across 112 distinct ideas — 85 easier, 126 medium and 61 harder.

On this page · 12 sections

Everything alive is built from four classes of large biological molecules — carbohydrates, lipids, proteins, and nucleic acids. Only three of them are polymers. Lipids are the exception. They are grouped by being nonpolar, not by sharing a monomer, and a triglyceride is glycerol plus three fatty acids rather than a chain of repeats. All of it operates in a water-based cell, and lipids do their jobs precisely because they do not dissolve in that water. Carbon supplies the skeleton because a carbon atom forms four covalent bonds. One reaction, dehydration synthesis, links monomers into polymers. Its reverse, hydrolysis, splits them. That same pair of reactions runs in all three polymer families; only the bond gets a different name.

Water is not background scenery here. Its polarity produces hydrogen bonds, and hydrogen bonds produce cohesion, adhesion, high specific heat, evaporative cooling, floating ice, and water's power as a solvent. The same class of weak bonds that holds water together also folds a protein into its working shape. That is why a temperature spike or a pH shift can destroy an enzyme without breaking a single covalent bond in its backbone.

Then enzymes, which is where this unit's questions actually live. Of the 272 Unit 1 questions you will practice here, 61 test enzyme kinetics — about 22 percent, better than one in five. Add Vmax, active site, denaturation, and the two inhibition types, and enzymes swamp everything else. Unit 1 is roughly 9% of the exam, but enzyme reasoning and protein structure resurface in cellular energetics, membrane transport, and gene expression. The return on learning it properly runs well past this unit.

The unit in a minute

One line per topic. Tap any line for the full notes.

  1. Water: polarity, hydrogen bonds, and every property that followsBent geometry plus unequal electron sharing makes hydrogen bonds, and hydrogen bonds make cohesion, adhesion, temperature stability, evaporative cooling, and floating ice.
  2. pH and buffer systemsBuffers hold pH steady because the conjugate base absorbs added H+ and the weak acid releases H+ when base is added, keeping free protons roughly constant.
  3. Carbon and the assembly of macromoleculesCarbon's tetravalence builds the skeleton; dehydration synthesis and hydrolysis build and break every polymer, one water molecule per bond.
  4. Carbohydrates, lipids, and the hydrophobic effectAlpha versus beta glucose explains starch versus cellulose, kinked tails explain fluid fats, and the hydrophobic effect is really water gaining entropy.
  5. Protein structure, denaturation, and misfoldingBackbone hydrogen bonds hold secondary structure while R-group interactions and disulfide bridges hold tertiary and quaternary; denaturation breaks those weak interactions at every level and destroys function, leaving the primary sequence untouched.
  6. Nucleic acids and nucleotide structureSugar identity and base identity separate DNA from RNA; phosphodiester bonds give the backbone its direction and its negative charge.
  7. Enzymes: active site, specificity, temperature, and pHThe active site's shape and charge come from the fold, so anything that unfolds the protein eliminates catalysis rather than merely slowing it.
  8. Enzyme kinetics: Vmax, saturation, and inhibitionVmax is active-site saturation; competitive inhibition leaves the plateau where it was, while noncompetitive inhibition lowers it.
Grind Chemistry of Life questionsAlready know this? Skip the notes and prove it.

The big ideas

Shape is function, and shape is held by weak bonds

A protein works because of its three-dimensional shape, and that shape is held by hydrogen bonds, hydrophobic interactions, ionic attractions, and van der Waals forces. Each is weak — a hydrogen bond runs about one-twentieth the strength of a covalent bond. Weak is the point. It lets proteins flex, bind, and release. It also means heat, extreme pH, or high salt can unfold the molecule while leaving the covalent peptide backbone intact. Denaturation is loss of shape, not loss of sequence. Every question about why an enzyme quit at 80 degrees Celsius is testing this one idea.

Two reactions build and break every macromolecule

Dehydration synthesis joins two monomers by removing an -OH from one and an -H from the other, releasing water and forming a covalent bond. Hydrolysis reverses it: water is added back, the bond splits, one fragment takes the -H and the other the -OH. Amino acids join by peptide bonds, sugars by glycosidic bonds, glycerol and fatty acids by ester bonds, nucleotides by phosphodiester bonds. Different names, identical logic. If a question hands you an unfamiliar enzyme, match it to a bond: proteases cut peptide bonds, nucleases cut phosphodiester bonds, lipases cut ester bonds.

Polarity is the root cause of everything water does

Oxygen pulls the shared electrons in each O-H bond much harder than hydrogen does, and the molecule is bent at about 104.5 degrees rather than straight. So the charges do not cancel: oxygen carries a partial negative charge, each hydrogen a partial positive. That single fact generates hydrogen bonding between molecules, and hydrogen bonding generates every one of the water properties the exam asks about. When a stem describes water behaving strangely, trace the chain instead of recalling a fact: bent shape, unequal electron sharing, partial charges, hydrogen bonds, observed behavior.

Enzymes change the route, not the destination

An enzyme lowers activation energy by holding substrates in the right orientation, straining their bonds, and supplying a chemical microenvironment that open solution cannot. It does not make an endergonic reaction exergonic. It does not change the free energy difference between reactants and products, and it does not shift the equilibrium position — it only reaches equilibrium faster. Enzymes also emerge unchanged, so one molecule runs thousands of cycles. Any answer claiming an enzyme supplies energy, alters the products, or makes an unfavorable reaction favorable is wrong on principle.

Kinetics questions are experimental design questions in disguise

Most enzyme items are wrapped in an experiment: a researcher varies one thing and measures reaction rate. Identify the independent variable (substrate concentration, temperature, pH, inhibitor present or absent), the dependent variable (rate, or product formed per unit time), and what was deliberately held constant. Buffers appear in these procedures for a reason — they pin pH so it cannot confound the result. When a plot levels off, steepens, or shifts sideways, name the variable responsible before reading the answer choices. Data interpretation here rewards that discipline more than recall.

Study notes

8 topics. Each one opens with its key idea, then the detail you need to use it.

1. Water: polarity, hydrogen bonds, and every property that follows

Key idea: Bent geometry plus unequal electron sharing makes hydrogen bonds, and hydrogen bonds make cohesion, adhesion, temperature stability, evaporative cooling, and floating ice.

Oxygen's electronegativity is about 3.44; hydrogen's is about 2.20. The electrons in each O-H bond sit closer to oxygen, and the molecule is bent at roughly 104.5 degrees, so the bond dipoles do not cancel. Water is polar. A partially positive hydrogen on one molecule attracts the partially negative oxygen on another, and that attraction is a hydrogen bond. Each molecule can form up to four, and in liquid water they break and reform constantly.

Everything else follows. Cohesion is water sticking to water; it creates surface tension and lets an unbroken water column be pulled up a tree. Adhesion is water sticking to other polar surfaces such as cellulose or glass, which drives capillary action. Water beads on a waxy leaf because cohesion pulls it inward while nonpolar wax offers nothing to hydrogen-bond with. Nonpolar surfaces do not repel water; they simply fail to attract it.

Specific heat is about 4.18 joules per gram per degree Celsius because added heat first breaks hydrogen bonds rather than speeding molecules up, and temperature measures molecular motion. Vaporizing one gram takes roughly 2,260 joules, since escaping means breaking nearly all of a molecule's hydrogen bonds at once. The molecules that leave carry off the most energy, cooling what remains — sweat, and transpiration. In ice, each molecule locks into four hydrogen bonds in an open lattice, holding neighbors farther apart than in the liquid, so ice is about 8% less dense and floats.

2. pH and buffer systems

Key idea: Buffers hold pH steady because the conjugate base absorbs added H+ and the weak acid releases H+ when base is added, keeping free protons roughly constant.

pH is the negative log of hydrogen ion concentration, so one pH unit is a tenfold change in [H+]. Human blood is held between 7.35 and 7.45. Drift outside that and proteins fail, because charged R groups on amino acids gain or lose protons, breaking the ionic bonds and hydrogen bonds that hold the fold together.

A buffer is a weak acid paired with its conjugate base. In blood, carbon dioxide from respiration reacts with water to form carbonic acid, which dissociates into H+ and bicarbonate. Add acid and bicarbonate accepts the extra H+, forming carbonic acid that breaks down to water and CO2 you exhale. Add base and carbonic acid donates a proton to replace what was consumed. The equilibrium shifts; free H+ stays nearly constant.

A buffer works best when solution pH sits within about one unit of the pair's pKa, because that is where meaningful amounts of both the acid form and the base form exist. A phosphate buffer with pKa near 7.2 is a strong choice at pH 7. Buffers do not eliminate added acid, do not convert it all to water, and do not work by diluting it. They convert free protons into the undissociated weak acid. In the lab, this is why enzyme assays are run in buffer: pH must be a controlled variable, not a drifting one.

3. Carbon and the assembly of macromolecules

Key idea: Carbon's tetravalence builds the skeleton; dehydration synthesis and hydrolysis build and break every polymer, one water molecule per bond.

Carbon has four valence electrons, so it forms four covalent bonds. It bonds to hydrogen, oxygen, nitrogen, sulfur, and to other carbons, building straight chains, branched chains, and rings with single, double, or triple bonds. That combinatorial freedom is why millions of distinct organic molecules exist. Carbon is not the most abundant element in Earth's crust, and it is not especially electronegative. Its importance is structural.

Attached functional groups do the chemistry. Hydroxyl and carbonyl make a molecule polar and water-soluble. Carboxyl acts as an acid by releasing H+, while amino acts as a base by accepting H+. Phosphate carries negative charge and stores transferable energy. Sulfhydryl groups on cysteine form the disulfide bridges that lock proteins together.

Polymers assemble by dehydration synthesis. An -OH leaves one monomer and an -H leaves the next, water is released, and a covalent bond forms in its place. The reaction is endergonic and enzyme-catalyzed. Hydrolysis runs it backward: a water molecule is inserted across the bond, the -H goes to one fragment and the -OH to the other, and the polymer is cut. That is precisely what digestion is. Count it out on an exam — joining n monomers into one chain releases n minus 1 water molecules, and fully hydrolyzing that chain consumes the same number.

4. Carbohydrates, lipids, and the hydrophobic effect

Key idea: Alpha versus beta glucose explains starch versus cellulose, kinked tails explain fluid fats, and the hydrophobic effect is really water gaining entropy.

Carbohydrates run roughly 1:2:1 carbon to hydrogen to oxygen. Glucose is C6H12O6 and closes into a ring in two forms: alpha, with the hydroxyl on carbon 1 pointing down, and beta, pointing up. That difference decides everything downstream. Starch is an alpha-glucose polymer that coils into a helix and is easily hydrolyzed by amylase. Cellulose is a beta-glucose polymer in which every other monomer flips 180 degrees, so the chain runs straight. Straight chains hydrogen-bond to each other into rigid microfibrils, stiffening plant cell walls. Humans cannot digest cellulose because no human enzyme has an active site that fits the beta linkage. Glycogen is the branched alpha-glucose store in liver and muscle.

Lipids are grouped by being nonpolar, not by sharing a monomer. A fatty acid is a hydrocarbon tail with a carboxyl group. Saturated tails have no carbon-carbon double bonds, pack tightly, and stay solid. Unsaturated tails carry cis double bonds that kink the chain and block packing, so they stay liquid. Three fatty acids bonded to glycerol by ester bonds make a triglyceride.

Replace one fatty acid with a phosphate group and you get an amphipathic phospholipid. In water these form bilayers with no energy input. The tails do attract one another weakly, through van der Waals forces, but that attraction is not what drives bilayer assembly. The driver is entropy. Water cannot hydrogen-bond to a hydrocarbon, so it cages each exposed tail in an ordered shell. Burying the tails releases that ordered water and raises entropy.

5. Protein structure, denaturation, and misfolding

Key idea: Backbone hydrogen bonds hold secondary structure while R-group interactions and disulfide bridges hold tertiary and quaternary; denaturation breaks those weak interactions at every level and destroys function, leaving the primary sequence untouched.

Every amino acid shares the same core: a central carbon bonded to an amino group, a carboxyl group, a hydrogen, and a variable R group. The 20 R groups are what differ, sorting into nonpolar, polar, acidic, and basic. Join two of them and the carboxyl end of the first reacts with the amino end of the second. Water leaves, and the covalent link left behind is called a peptide bond. Ribosomes catalyze this during translation, building the chain from its amino end toward its carboxyl end.

Four levels follow. Primary structure is the sequence, held by covalent peptide bonds. Secondary structure is the alpha helix and beta pleated sheet, formed by hydrogen bonds between backbone C=O and N-H groups — the backbone, not the R groups. Tertiary structure is the overall fold, driven by hydrophobic R groups burying inward and stabilized by hydrogen bonds, ionic bonds between charged R groups, and covalent disulfide bridges between cysteines. Quaternary structure is two or more folded chains assembled together, as in hemoglobin's four subunits.

Denaturation disrupts the weak interactions at levels two through four. Heat shakes them apart; extreme pH changes R-group charges so ionic bonds fail. Peptide bonds survive, so the sequence is intact, but the shape and therefore the function are gone. A cooked egg white does not un-cook.

Misfolding is a different failure, and the exam separates the two. A denatured protein has lost its shape and does nothing. A misfolded protein has settled into a different shape that is stable — and sometimes destructive. Prions work this way. The normal prion protein, PrPC, contacts the misfolded form, PrPSc, and flips into that same conformation, which then converts more copies. No DNA or RNA is involved at any step. That is why UV sterilization does not stop prions: UV damages nucleic acids, and a prion is protein only.

6. Nucleic acids and nucleotide structure

Key idea: Sugar identity and base identity separate DNA from RNA; phosphodiester bonds give the backbone its direction and its negative charge.

A nucleotide has exactly three parts: a five-carbon sugar, one or more phosphate groups attached at the 5' carbon, and a nitrogenous base attached at the 1' carbon. Bases come in two shapes. Purines — adenine and guanine — have two fused rings. Pyrimidines — cytosine, thymine, and uracil — have one. A purine always pairs with a pyrimidine, keeping the double helix a constant width.

DNA and RNA differ in two specific ways worth memorizing exactly. DNA's sugar is deoxyribose, carrying only a hydrogen at the 2' carbon, and DNA uses thymine. RNA's sugar is ribose, carrying a hydroxyl at the 2' carbon, and RNA uses uracil. That 2'-OH makes RNA chemically reactive and short-lived, which suits a temporary message. DNA's missing oxygen makes it stable enough to archive a genome.

Nucleotides polymerize through phosphodiester bonds linking the 3'-OH of one sugar to the 5'-phosphate of the next. Every strand therefore has a 5' to 3' direction. The sugar-phosphate backbone carries negative charge from those phosphates, which is why DNA migrates toward the positive electrode in gel electrophoresis. Adenine pairs with thymine using two hydrogen bonds and guanine with cytosine using three, so GC-rich DNA takes more heat to separate.

7. Enzymes: active site, specificity, temperature, and pH

Key idea: The active site's shape and charge come from the fold, so anything that unfolds the protein eliminates catalysis rather than merely slowing it.

An enzyme is usually a protein that speeds a reaction by lowering its activation energy. It does this physically. It holds substrates in the correct orientation so productive collisions stop depending on luck. It strains bonds toward the transition state. It creates a local microenvironment — an acidic R group, a water-excluded pocket — that open solution cannot provide.

Enzyme function starts at the active site, a small pocket formed by a handful of R groups brought together by the tertiary fold. Specificity comes from complementary shape and complementary charge, so only a substrate that fits and matches binds productively. The current model is induced fit: the substrate binds and the enzyme adjusts its conformation to close around it. The older lock-and-key image is too rigid.

Temperature and pH curves look different from each other, and that matters. Raising temperature increases kinetic energy and collision frequency, so rate climbs to an optimum near 37 degrees Celsius for human enzymes. Past that, rate collapses sharply as the enzyme denatures, making the curve asymmetric rather than a mirror image of the rise. pH optima reflect where the active site's R groups carry the right charges. Pepsin peaks near pH 2 in the stomach; trypsin peaks near pH 8 in the small intestine.

8. Enzyme kinetics: Vmax, saturation, and inhibition

Key idea: Vmax is active-site saturation; competitive inhibition leaves the plateau where it was, while noncompetitive inhibition lowers it.

Plot reaction rate against substrate concentration with enzyme amount fixed and the curve rises steeply, bends, and flattens. At low substrate concentration most active sites sit empty, so adding substrate creates more enzyme-substrate complexes and rate climbs almost proportionally. Substrate availability is the limiting factor. As concentration rises, the sites fill. At the plateau every active site is reoccupied the instant it empties: the enzyme is saturated. That plateau is Vmax.

Understand what limits rate at Vmax — the number of enzyme molecules and how fast each processes a substrate, its turnover number. More substrate cannot help, because there is nowhere left to bind. Double the enzyme concentration and Vmax doubles. Km, which is background beyond the AP course but makes the plateau reasoning easier, is the substrate concentration producing half of Vmax. It indexes affinity: a low Km means the enzyme reaches half speed with little substrate, so it binds tightly.

A competitive inhibitor resembles the substrate and occupies the active site. Flooding the system with substrate outcompetes it, so the curve climbs more slowly but still reaches the same plateau: Vmax is unchanged, and Km rises. A noncompetitive inhibitor binds a separate allosteric site and deforms the active site. Extra substrate cannot displace it, so the plateau itself drops: Vmax falls while Km stays the same. Read the plateau height first: if it dropped, the inhibition was not competitive.

Common mistakes

Drawn from the wrong answers students actually pick on these questions.

Explaining water's high specific heat with the wrong mechanism — saying the covalent bonds inside water molecules store thermal energy, or that ice's low density is the cause.

Specific heat depends on intermolecular forces. Heat goes into breaking hydrogen bonds between separate molecules, not the O-H bonds within one, which survive boiling. Ice floating is a real fact caused by hydrogen-bond geometry, but it explains insulated lakes, not resistance to temperature change.

Reaching for a water property that does not cause the phenomenon described — offering heat of vaporization or specific heat to explain droplets on a leaf.

Match property to phenomenon. Heat of vaporization explains evaporative cooling. Specific heat explains temperature stability. Cohesion plus adhesion explains beading, surface tension, and capillary rise. A true statement in the wrong slot is still a wrong answer.

Saying water beads on a waxy leaf because polarity repels the wax, or because water adheres strongly to it.

Polar molecules do not repel nonpolar surfaces; they just have nothing to hydrogen-bond with, so adhesion is low. Cohesion then pulls the droplet inward into a bead. Low adhesion plus high cohesion, not repulsion.

Explaining the Vmax plateau as cofactor depletion, substrate lowering the pH, or substrate sticking nonspecifically to the enzyme's surface.

The plateau is active-site saturation. Cofactor depletion would make rate decline rather than level off, and reaction buffers hold pH constant. Rate at Vmax is set by enzyme quantity and turnover number, so only adding enzyme raises it.

Describing buffers as neutralizing all added acid into water, diluting it, or pushing pH above the pKa.

A buffer is a weak acid and its conjugate base in equilibrium. The conjugate base binds free H+ into the undissociated acid form, and the acid releases H+ when base is added. Buffering is strongest near the pKa, not away from it.

Matching an enzyme to the wrong substrate — expecting a protease to act on maltose, a phospholipid, or DNA.

Enzymes are named for the substrate they act on, plus the suffix -ase. You then infer the bond from the substrate. Protease acts on protein, so it cuts peptide bonds. Maltase acts on maltose, so it cuts a glycosidic bond. Phospholipase acts on phospholipids, so it cuts ester bonds. Nuclease acts on nucleic acids, so it cuts phosphodiester bonds. Name the substrate first, then the bond.

How this unit shows up on the exam

Unit 1 supplies about 9% of the exam — roughly five or six of the 60 multiple-choice questions — plus recurring appearances inside free-response items on metabolism, membranes, and lab data. Stems rarely ask for a bare definition. The dominant format is a scenario followed by "which of the following best explains." A researcher heats an enzyme to 80 degrees Celsius, water beads on a waxy leaf, a rate curve flattens. The wrong answers are usually real facts attached to the wrong phenomenon. Ice really is less dense than water, and that is still a wrong explanation for specific heat.

Expect paired-property items asking which two properties account for an observation, where you reject a pair because one half fails. Expect enzyme-to-substrate matching, which reduces to naming the substrate and then its bond. Expect an equation-selection item on the bicarbonate buffer whose distractors reverse the reaction or claim it produces more acid.

Graphs carry the most points. Rate versus substrate concentration, rate versus temperature, rate versus pH, and inhibitor-versus-control overlays all appear. Check the plateau height first, then the position of half-maximum, before deciding which inhibitor you are seeing.

On free response, examiners reward causal chains and penalize restatement. Do not write that the enzyme denatured. Write that heat disrupted the hydrogen bonds and hydrophobic interactions holding the tertiary structure, so the active site no longer complemented the substrate, so no enzyme-substrate complexes formed. Justify claims with specific values from the figure, and when asked for a control, name the setup that differs in exactly one variable.

How the exam actually asks it

Real items from the AP Biology bank, easier first. The answer is marked, and every wrong choice is explained — because knowing why a distractor is tempting is most of the work.

Worked example 1Easier
Water has an unusually high specific heat capacity compared to most other liquids. Which property of water is most directly responsible for this characteristic?
  1. AWater is less dense as a solid than as a liquid because ice forms an open lattice
  2. BHydrogen bonds between water molecules must absorb energy and break before temperature can riseCorrect
  3. CCovalent bonds within water molecules store large amounts of thermal energy
  4. DWater molecules are nonpolar, which allows them to pack tightly together as a liquid

Why B is right

Water's high specific heat results from the extensive hydrogen bonding network between molecules. A large amount of energy must be absorbed to break these hydrogen bonds before the kinetic energy (temperature) of the water molecules increases, making water resistant to temperature change.
Why the other 3 choices miss
A
Ice being less dense than liquid water (due to its open hydrogen-bonded lattice) is true but explains why ice floats, not water's high specific heat capacity.
C
Specific heat involves intermolecular forces (hydrogen bonds), not intramolecular covalent bonds.
D
Water is actually polar due to its bent shape and electronegative oxygen; polarity is what enables hydrogen bonding.
Worked example 2Easier
Enzymes called proteases catalyze the hydrolysis of peptide bonds in proteins. Which of the following is a substrate that a protease would act upon?
  1. AA disaccharide such as maltose
  2. BA phospholipid molecule
  3. CA strand of DNA
  4. DA polypeptide chainCorrect

Why D is right

Proteases catalyze hydrolysis of peptide bonds, which are the covalent bonds linking amino acids in a polypeptide chain. Adding water breaks the peptide bond, releasing individual amino acids or shorter peptide fragments. Proteins and polypeptides are therefore the substrates for proteases.
Why the other 3 choices miss
A
Maltose is a disaccharide broken down by the enzyme maltase (a carbohydrase) via hydrolysis of its glycosidic bond, not a protease.
B
Phospholipids are hydrolyzed by phospholipases, not proteases; they contain ester bonds, not peptide bonds.
C
DNA is a nucleic acid; enzymes called nucleases (DNases) would hydrolyze the phosphodiester bonds in DNA, not proteases.
Worked example 3Easier
Carbon is considered the backbone of organic molecules primarily because carbon atoms:
  1. AHave the highest electronegativity among common biological elements, making them ideal for polar bonds
  2. BCan form four covalent bonds, enabling the construction of diverse and complex molecular structuresCorrect
  3. CAre the most abundant element in Earth's crust, making them readily available for life
  4. DCan only form single bonds, resulting in stable, rigid molecular frameworks

Why B is right

Carbon's unique ability to form four covalent bonds (tetravalence) allows it to bond with hydrogen, oxygen, nitrogen, sulfur, and other carbon atoms in chains, branches, and rings. This versatility enables the formation of millions of structurally diverse organic molecules. Carbon can also form single, double, and triple bonds, adding further structural variety.
Why the other 3 choices miss
A
Carbon has relatively low electronegativity compared to oxygen, nitrogen, and fluorine; C-H bonds are essentially nonpolar, which is also important for organic chemistry.
C
Carbon is actually not the most abundant element in Earth's crust (oxygen and silicon are more abundant); its importance in biology is chemical, not about abundance.
D
Carbon can form single, double, and triple bonds; the ability to form multiple bond types (not just single bonds) is part of what makes carbon so versatile.
Worked example 4Easier
A peptide bond forms between two amino acids during protein synthesis. This bond forms between which two chemical groups, and what type of reaction produces it?
  1. AThe carboxyl group of one amino acid and the carboxyl group of another; a hydrolysis reaction that consumes a molecule of water
  2. BThe carboxyl group of one amino acid and the amino group of another; a condensation (dehydration) reaction that releases waterCorrect
  3. CThe amino group of one amino acid and the amino group of another; a condensation reaction that releases a molecule of ammonia
  4. DThe R-groups (side chains) of two adjacent amino acids; an addition reaction that incorporates a water molecule into the bond

Why B is right

A peptide bond forms when the carboxyl group of one amino acid reacts with the amino group of another amino acid, releasing a water molecule (condensation or dehydration synthesis reaction). The resulting C-N bond (the peptide bond) links the two amino acids and forms the backbone of polypeptides. This reaction is catalyzed by ribosomes during translation.
Why the other 3 choices miss
A
Hydrolysis reactions break peptide bonds by consuming water; peptide bond formation is the reverse, a condensation reaction that releases water. A peptide bond also does not join two carboxyl groups.
C
Amino groups of two different amino acids do not bond to each other in peptide formation, and no ammonia is released; the bond requires a carboxyl group from one amino acid and an amino group from another, releasing water.
D
R-groups are the variable side chains that distinguish amino acids; they are not involved in peptide bond formation, and peptide bonds are formed by condensation (water released), not addition reactions that incorporate water.

Can you do all of these?

Tick what you can do without looking. Anything left unticked is where to go back to.

0 of 12 ticked

Ready to test yourself?

Open practice pulls from the 46 free questions in this unit. The other 226 come with the one-time AP purchase, which unlocks every AP course.

Official topic list

The official course framework breaks this unit into 7 numbered topics.

  1. 1.1Structure of Water and Hydrogen Bonding
  2. 1.2Elements of Life
  3. 1.3Introduction to Macromolecules
  4. 1.4Carbohydrates
  5. 1.5Lipids
  6. 1.6Nucleic Acids
  7. 1.7Proteins

Key terms in Chemistry of Life

Ordered by how often our reviewed questions test them. Open any term to see the questions that use it.

Enzyme kinetics61 questionsWater properties38 questionsProtein structure27 questionsVmax24 questionsDenaturation23 questionsActive site18 questionsHydrogen bonds17 questionsMacromolecules17 questionsCohesion16 questionsHydrolysis16 questionsCarbohydrates15 questionsCompetitive inhibition15 questionsEnzyme function15 questionsExperimental design15 questionsEnzymes14 questionsBuffer systems13 questionsNucleotide structure12 questionsData interpretation11 questionsTemperature11 questionsDehydration synthesis10 questionsAmino acids9 questionsCellulose9 questionsLipids9 questionsNoncompetitive inhibition9 questionsPeptide bond9 questionsPhospholipids9 questionsAdhesion8 questionsFatty acids8 questionsNucleic acids8 questionsPolarity8 questionsStarch8 questionsblood pH7 questionsDNA7 questionsEnzyme specificity7 questionspKa7 questionsProtein folding7 questionsSaturation7 questionsSpecific heat7 questionsSurface tension7 questionsAmphipathic6 questionsEnzyme inhibition6 questionsHydrophobic effect6 questionsMolecular biology6 questionsTertiary structure6 questionsEnzyme activity5 questionsHydrogen bonding5 questionsMutation5 questionsPolysaccharides5 questionsProteins5 questionsStructure function5 questionsTranspiration5 questionsAcid base4 questionsAmylase4 questionsBenedict test4 questionsBicarbonate4 questionsBicarbonate buffer4 questionsCofactors4 questionsDeoxyribose4 questionsDisulfide bonds4 questionsEnergy storage4 questionsGlycosidic bond4 questionsHemoglobin4 questionsHomeostasis4 questionsIce density4 questionsIrreversible inhibition4 questionsLipid structure4 questionsLock and key4 questionsMelting point4 questionsPepsin4 questionspH optimum4 questionspH regulation4 questionsPrimary structure4 questionsQuaternary structure4 questionsRibose4 questionsSelf assembly4 questionsSolvent4 questionsSucrose4 questionsAggregation3 questionsAnomeric carbon3 questionsCapillary action3 questionsCarbon chemistry3 questionsCarbonic anhydrase3 questionsCarboxyl group3 questionsChemical bonds3 questionsCondensation reaction3 questionsConjugate base3 questionsCooperativity3 questionsCovalent bonds3 questionsEnzyme denaturation3 questionsEster bond3 questionsExtremophiles3 questionsFunctional groups3 questionsGlycogen3 questionsHeat of vaporization3 questionsHeavy metals3 questionsHydrophobic interactions3 questionsIonic compounds3 questionsKcat3 questionsLineweaver Burk3 questionsLogarithmic scale3 questionsMolecular structure3 questionsNoncovalent interactions3 questionsOrganic molecules3 questionsOxidation3 questionsPeptide bonds3 questionsPhosphodiester bond3 questionsPrions3 questionsProtein stability3 questionsRNA3 questionsSubstrate binding3 questionsTrans fats3 questionsXylem transport3 questions

The rest of AP Biology

Every unit with its share of the exam. You are on Unit 1.

  1. 1Chemistry of Life9% of exam
  2. 2Cell Structure and Function12% of exam
  3. 3Cellular Energetics14% of exam
  4. 4Cell Communication and Cell Cycle13% of exam
  5. 5Heredity9% of exam
  6. 6Gene Expression and Regulation14% of exam
  7. 7Natural Selection16% of exam
  8. 8Ecology13% of exam