8 topics. Each one opens with its key idea, then the detail you need to use it.
1. Membrane structure: the fluid mosaic and the proteins in it
Key idea: Hydrophobic faces lipid, hydrophilic faces water — that single rule predicts both protein topology and how tightly the bilayer packs.
A phospholipid has a hydrophilic phosphate head and two hydrophobic fatty acid tails. Drop enough of them in water and they self-assemble into a lipid bilayer with tails buried inward. No enzyme builds this; the hydrophobic effect does. The fluid mosaic model adds two claims. It is fluid, so lipids and most proteins diffuse laterally within their leaflet. It is a mosaic, so proteins, glycolipids, and cholesterol sit scattered through it in a patchwork.
Three things set membrane fluidity. Unsaturated fatty acids carry cis double bonds that kink the tail, and kinked tails cannot pack tightly, so more unsaturation means more fluidity. Shorter tails make fewer van der Waals contacts and also raise fluidity. Cholesterol buffers both directions: its rigid rings restrain phospholipid movement when warm and wedge between tails when cold to stop the membrane freezing into a gel. Bacteria in Arctic water raise their proportion of unsaturated tails for exactly this reason, an adjustment called homeoviscous adaptation.
Membrane proteins follow one rule. A transmembrane protein crosses an oily core about three nanometers thick, so its spanning segments are alpha helices of roughly twenty nonpolar residues. Its polar and charged domains get pushed out into the water on either side. Peripheral proteins are the opposite: hydrophilic surfaces that bind the phosphate heads without crossing. Glycoproteins carry their sugars on the outer face only, where they do cell recognition.
2. Membrane transport: passive, facilitated, and active
Key idea: Ask two questions of any transport scenario: which way is the gradient, and is the protein flipping around its cargo or just holding a pore open?
Passive transport needs no ATP because the substance runs down its own gradient; the free energy is already stored there. Simple diffusion goes straight through the bilayer and obeys the CO2 > water > glucose > Na+ ranking. Facilitated diffusion is still passive but uses a protein, which is how polar and charged species cross at useful rates.
The channel-versus-carrier distinction gets tested constantly. A channel is an open, selective pore. It does not bind its cargo and reshape around it, and it moves solute extremely fast. Aquaporins are the standard case: water-selective channels that speed osmosis far past what a bare bilayer allows, while their narrow geometry and fixed charges exclude ions, protons included. A carrier binds its solute and changes conformation to release it on the far side, which is slower and saturates once every binding site is full. GLUT glucose transporters work this way.
Active transport drives a solute against its electrochemical gradient and has to be paid for. Primary active transport hydrolyzes ATP directly. The sodium-potassium pump exports three sodium ions and imports two potassium ions per ATP, building both a chemical gradient and a net negative charge inside. The V-ATPase that acidifies lysosomes is another primary pump. Secondary active transport then spends that stored sodium gradient to haul a second solute uphill, as the sodium-glucose cotransporter does in the intestine.
3. Osmosis and water potential
Key idea: Water flows from high water potential to low, and solute concentration only sets the gradient it flows down.
Osmosis is the diffusion of water across a selectively permeable membrane. Water moves; solutes generally do not. Solutes set the gradient, but water is what responds to it. That distinction produces more wrong answers in this unit than anything else.
AP Biology quantifies it with water potential, written as psi and measured in bars. Water potential is the sum of a pressure component and a solute component. Pure water in an open container is defined as zero. Adding solute makes the solute potential negative, so an unpressurized solution always sits below zero. The solute potential equation is on the exam formula sheet: multiply the ionization constant, the molar concentration, the pressure constant, and the temperature in Kelvin, then take the negative. Sodium chloride dissociates into two particles, so its ionization constant is 2, while sucrose stays at 1. Water always moves from higher water potential toward lower.
Animal cells have no wall. In a hypotonic solution the outside holds the higher water potential, water enters, and the cell swells until it lyses — which is why red blood cells burst in distilled water. In a hypertonic solution water leaves and the cell crenates into a spiky shape. Nothing pumps water. Aquaporins only speed up movement that the gradient already demands.
4. Plant cells: turgor, plasmolysis, and a wall that carries load
Key idea: The wall is load-bearing in both directions. It resists turgor pushing outward from the protoplast, and it resists inward collapse when the water in a xylem lumen is under tension. That is why the membrane peels away intact in plasmolysis while the wall keeps the cell's outline.
A plant cell in a hypotonic solution does not burst. Water enters by osmosis, the central vacuole swells, and the protoplast presses outward on the cell wall. The wall pushes back, raising the pressure component of water potential until the two sides equilibrate. The cell is now turgid, and turgor is what holds a non-woody plant upright. Wilted spinach in distilled water crisps up within half an hour by exactly this route.
Reverse the gradient and you get plasmolysis. In a hypertonic salt solution, water leaves the vacuole and cytoplasm, the protoplast shrinks, and the flexible plasma membrane peels away from the wall. The wall itself does not shrink, buckle, or break. It is rigid, and it keeps the cell's outline while the living contents pull inward. Plant cells do not crenate; crenation is the animal-cell response and needs a membrane with nothing rigid outside it.
The cell wall is cellulose — glucose chains linked beta-1,4 and bundled into microfibrils with enormous tensile strength. This matters beyond turgor. Xylem vessels carry water under tension rather than pressure. Transpiration pulls the water column upward, so the water in the lumen sits at negative pressure. The cellulose wall is the reinforcement that stops the vessel collapsing inward like an over-sucked straw. Digest the cellulose and the vessel implodes, the water column breaks, and transport stops. Fungal walls use chitin instead; bacterial walls use peptidoglycan.
5. The endomembrane system and the secretory pathway
Key idea: Rough ER folds and glycosylates, Golgi modifies and sorts, and vesicular transport carries both the cargo and the membrane between them.
Trace a secreted protein and you get the whole system. Translation starts on a free ribosome in the cytosol. If the growing chain opens with a hydrophobic signal sequence, the ribosome docks onto the rough ER and the rest of the protein threads into the ER lumen. That docking is why rough ER looks studded — the ribosomes are recruited, not permanent fixtures. Inside the lumen, chaperones fold the protein, disulfide bonds form in the oxidizing environment, and sugar chains get attached.
Correctly folded proteins leave by vesicular transport, budding off in coated vesicles that fuse with the Golgi apparatus at its cis face, nearest the ER. Moving through the medial cisternae to the trans face, sugar chains are trimmed and rebuilt and sorting tags are added. The trans-Golgi network is the dispatch desk: vesicles depart for secretion by exocytosis, for insertion into the plasma membrane, or for delivery to lysosomes. Lysosomal hydrolases are routed by a mannose-6-phosphate tag added in the Golgi.
Smooth ER carries no ribosomes and does different work: synthesis of phospholipids and steroid hormones, detoxification of drugs and alcohol in liver cells, and calcium storage in the sarcoplasmic reticulum of muscle. Note the accounting: membrane itself travels this pathway. When a vesicle fuses with the plasma membrane during exocytosis, its lipid joins that membrane, and the vesicle's inner face becomes the cell's outer face.
6. Bulk transport: endocytosis, lysosomes, and autophagy
Key idea: Endocytosis is always vesicle-based, and the proton pump that acidifies the compartment is what enables both ligand release and digestion.
Anything too large for a channel or carrier moves inside a membrane sac. Phagocytosis is engulfment of large solid particles — bacteria, dead cells, debris — by macrophages, neutrophils, and amoebae. The cell extends actin-driven pseudopods around the particle and fuses them into a large vesicle called a phagosome, which then fuses with a lysosome. Pinocytosis takes in extracellular fluid non-selectively.
Receptor-mediated endocytosis is the selective version, and its sequence is heavily tested. A ligand such as an LDL particle binds its receptor. Receptor-ligand complexes cluster into a coated pit lined on the cytosolic side with clathrin. The pit invaginates, a clathrin-coated vesicle pinches off, the coat is shed, and the vesicle fuses with an early endosome. Nothing diffuses freely through the cytoplasm here, and no receptor opens a pore wide enough for a 22-nanometer LDL particle.
Inside the endosome, a V-ATPase pumps protons in and drops the pH. Acidity makes the ligand release its receptor, so receptors recycle to the surface while cargo continues to the lysosome. Lysosomal hydrolases need that same pH near 5 to work. Block the V-ATPase with a drug and the pH climbs, the hydrolases go quiet, and both lysosomal digestion and autophagy — the recycling of the cell's own damaged organelles — stall.
7. Prokaryotic cells, mitochondria, chloroplasts, and endosymbiosis
Key idea: Double membranes, circular DNA, 70S ribosomes, and independent fission are the four pieces of evidence — and 70S predicts which cells an antibiotic will damage.
Start with what a bacterium is, since that is the ancestor. A prokaryote keeps its circular chromosome in a nucleoid — cytoplasm with no membrane around it — while a eukaryote seals its DNA behind a nuclear envelope. Prokaryotes have no membrane-bound organelles at all, so their electron transport chain runs on the plasma membrane rather than an inner mitochondrial membrane. Their ribosomes are 70S, not the 80S of the eukaryotic cytosol, and their wall is peptidoglycan rather than plant cellulose or fungal chitin.
The endosymbiotic theory says an ancestral host cell engulfed an aerobic alpha-proteobacterium that became the mitochondrion. A later, separate engulfment of a photosynthetic cyanobacterium produced the chloroplast in the plant and algal lineage. This is not a story you take on faith; it is a set of checkable predictions.
Four lines of evidence carry the argument. Both organelles have a double membrane, the inner one derived from the bacterium and the outer from the host's engulfing vesicle. Both hold their own circular DNA, uncoated by histones, like a bacterial chromosome. Both build bacterial-type ribosomes — the 70S class, built from 30S and 50S subunits — while eukaryotic cytosolic ribosomes are 80S. Both divide by their own fission process rather than being built from scratch each cell cycle, and both are bacterial in size.
The 70S point has a testable consequence the exam likes. An antibiotic that binds 70S ribosomes, such as chloramphenicol, hits bacteria and also the ribosomes inside mitochondria and chloroplasts, but leaves the 80S ribosomes of the eukaryotic cytosol alone. Chloroplasts add a third membrane system inside the envelope: thylakoid discs stacked into grana, suspended in the stroma. Neither organelle belongs to the endomembrane system, so most of their proteins are built on free cytosolic ribosomes and imported afterward.
8. The cytoskeleton and cell junctions
Key idea: Match the filament to the job: actin for shape and movement, microtubules for transport and chromosome separation, intermediate filaments for pure mechanical strength.
Three filament systems, three jobs. Actin microfilaments are thinnest at about 7 nanometers and the most dynamic. They form the cortex under the plasma membrane, set cell shape, drive migration via lamellipodia and filopodia, and pinch the cell in two with a contractile ring at cytokinesis. Microtubules are hollow tubulin cylinders about 25 nanometers across. They build the mitotic spindle that separates chromosomes, act as tracks for the motor proteins kinesin and dynein hauling vesicles and organelles, and form the 9+2 axoneme of cilia and flagella. Intermediate filaments sit between the two at roughly 10 nanometers and act as tension-bearing cables: keratins in skin, vimentin in connective tissue, nuclear lamins lining the inside of the nuclear envelope. They have no motor proteins and no rapid assembly cycle, which is why they are good at mechanical strength.
Cell junctions connect neighbors, and each type maps to a function. Tight junctions seal the gap between epithelial cells so nothing leaks between them. Desmosomes are rivets anchored to intermediate filaments — keratins in epithelia such as skin, desmin in cardiac muscle — giving those tissues resistance to stretching. Gap junctions are connexon pores that pass ions and small molecules directly between cytoplasms, which is how cardiac muscle coordinates a beat. Plasmodesmata do that job in plants, threading through the cell walls.