Skip to content

Unit 2 of 7

Populations

13% of the exam221 reviewed questions73 key terms18 min read

Populations is worth about 13% of the AP Environmental Science exam. Our bank tests it with 221 reviewed questions across 73 distinct ideas — 68 easier, 111 medium and 42 harder.

On this page · 12 sections

A population is every member of one species living in one place, and this unit asks a single question about it: what makes it bigger or smaller, and what stops it? Only four things change a population's size. Births and immigration add individuals, while deaths and emigration remove them. How those rates shift over time is called population dynamics, and the rest of the unit explains why they shift.

The first half is about wild populations. With unlimited resources a population grows exponentially, adding more individuals each year at the same percentage rate. Real environments run out of food, space and shelter, so growth slows as the population nears its carrying capacity, the largest size the habitat can support. That slowdown gives the S-shaped logistic curve. Species also differ in how they spend energy on offspring, which shows up in r- and K-selected life histories and in survivorship curves. Predators and prey push each other's numbers up and down in linked cycles.

The second half applies the same rates to humans through demographics, the study of human population statistics. Demographers track crude birth and death rates, total fertility rate, and age structure, then use the demographic transition model to explain why countries grow fast and later level off. The IPAT equation links population size to environmental impact. About a quarter of this unit's questions are calculations, so you need the growth-rate formula, the rule of 70 and percent change to be automatic.

The unit in a minute

One line per topic. Tap any line for the full notes.

  1. Calculating growth rate, percent change and doubling timeGrowth % = (birth rate - death rate) / 10 when rates are per 1,000; doubling time = 70 / growth %.
  2. Exponential growth, logistic growth and carrying capacityConstant percentage increase means exponential; slowing growth that levels off at K means logistic, with the fastest growth at K/2.
  3. Limiting factors, density dependence and overshootDensity-dependent factors such as competition, disease and predation regulate populations near K; density-independent factors such as weather cause crashes at any density.
  4. Maximum sustainable yieldMSY is taken at K/2, where the logistic curve is steepest; harvesting more than the yearly growth shrinks the stock.
  5. Life history strategies and survivorship curvesR-selected species have many cheap offspring and Type III curves; K-selected species have few cared-for offspring and Type I curves.
  6. Predator-prey cyclesPredator and prey populations cycle together, with predator peaks lagging prey peaks because predators need time to reproduce.
  7. Fertility, age structure and population momentumReplacement fertility is about 2.1; a young age structure keeps a population growing for decades after TFR drops, which is population momentum.
  8. The demographic transition and IPATIn the demographic transition death rates fall before birth rates, causing a growth surge; IPAT multiplies population, affluence and technology.
Grind Populations questionsAlready know this? Skip the notes and prove it.

The big ideas

Four rates decide everything

Population change equals (births + immigration) minus (deaths + emigration). Every growth curve, age pyramid and demographic stage is just a story about which of these rates is high and which is low. When a question asks why a population grew or shrank, name the rate that changed and the cause behind it. Natural increase counts only births and deaths, so migration has to be added separately when the question includes it.

Limits turn J-curves into S-curves

Exponential growth happens when nothing is in short supply, so each generation multiplies by the same factor. As density rises, food runs short, disease spreads more easily and predators find prey faster. These density-dependent factors cut birth rates and raise death rates until births roughly equal deaths at carrying capacity. A population that grows past carrying capacity has overshot it, and it usually falls back hard because it has damaged the resources it depends on.

Energy spent on offspring shapes a species

Every organism has a limited energy budget. An r-selected species spends it on huge numbers of cheap offspring and leaves most of them to die. A K-selected species spends it on a few well-protected young that mostly survive. This trade-off predicts how fast a species recovers from a disturbance, which survivorship curve it follows, and how vulnerable it is to extinction.

Human growth follows development, with a lag

Human populations grow fastest when death rates have already fallen but birth rates have not yet caught up. That gap is the engine of the demographic transition. Even after fertility falls to replacement level, a young age structure keeps the population growing for decades, which is called population momentum. A population's future is written in its age structure today.

Impact is people times what each person uses

The IPAT equation says environmental impact equals population times affluence times technology. Because the terms multiply, a small country of heavy consumers can do more damage than a large country of light consumers. Cutting one term helps, but the biggest drop in impact comes from cutting all three together.

Study notes

8 topics. Each one opens with its key idea, then the detail you need to use it.

1. Calculating growth rate, percent change and doubling time

Key idea: Growth % = (birth rate - death rate) / 10 when rates are per 1,000; doubling time = 70 / growth %.

Most population calculations use one chain of steps. Birth and death rates are usually given per 1,000 people per year. Subtract the crude death rate from the crude birth rate to get natural increase per 1,000, then divide by 10 to turn it into a percent. A country with a birth rate of 30 and a death rate of 8 grows by 22 per 1,000, which is 2.2% per year.

If the question gives migration, include it: growth rate = (births + immigration) - (deaths + emigration), all per 1,000. As a decimal, 6 per 1,000 is 0.006 per year, so watch which form the answer choices use.

The rule of 70 turns a growth rate into a doubling time. Divide 70 by the growth rate written as a percent, not a decimal. At 2% a population doubles in 35 years, and at 3.5% it doubles in 20. You can also run it backward: a population that doubles in 50 years is growing at 70 / 50 = 1.4% per year.

Percent change is (new - old) / old x 100. A town that grows from 40,000 to 46,000 has risen by 6,000 / 40,000 = 15%. Show every step on the exam, with units, because the free-response scoring rewards the setup and not only the final number.

2. Exponential growth, logistic growth and carrying capacity

Key idea: Constant percentage increase means exponential; slowing growth that levels off at K means logistic, with the fastest growth at K/2.

In exponential growth a population increases by the same percentage every time period. Because the base keeps getting bigger, the number added each year also gets bigger, which bends the graph into a J-shape. You can spot it in data by checking the ratio between years. Elk counts of 400, 440, 484 and 532 each rise about 10%, so the growth is exponential even though the yearly gain climbs from 40 to 48. Bacteria in fresh broth, or an invasive species in a new habitat with no predators, behave this way at first.

No environment supplies unlimited resources. Carrying capacity (K) is the largest population an environment can support over the long run with its available food, water, space and nesting sites. As a population nears K, competition for those resources rises, so births fall and deaths rise. Growth slows, and the curve flattens into an S-shape called logistic growth.

The key feature of logistic growth is where it is fastest. The number of individuals added per year peaks at half of carrying capacity (K/2). Below that point there are too few breeders. Above it, crowding slows reproduction. At K itself growth is zero, because births equal deaths. If the data show a steady percentage increase with no sign of slowing, it is not yet logistic.

3. Limiting factors, density dependence and overshoot

Key idea: Density-dependent factors such as competition, disease and predation regulate populations near K; density-independent factors such as weather cause crashes at any density.

A limiting factor is whatever resource or condition is in shortest supply and so holds a population back. Ecologists sort limiting factors by whether their strength depends on crowding.

Density-dependent factors get stronger as a population gets denser. Competition for food is the clearest case. In a crowded deer herd each animal finds less to eat, so females give birth to fewer fawns and more animals starve in winter. Disease also spreads faster when animals are packed together, and predators catch prey more easily when prey are common. These factors are what regulate a population around carrying capacity, because they push back harder the bigger it gets.

Density-independent factors hit a population no matter how crowded it is. A hurricane, a wildfire, a hard freeze or a drought kills the same fraction of a sparse population as a dense one. These factors can cause sudden crashes but they do not hold a population near K.

Overshoot happens when a population grows past carrying capacity because of a time lag. Births and deaths respond to a shortage only after a delay, so a population still reproducing at its earlier rate keeps growing past K. It is most likely when there are no predators to slow it. The classic case is St. Matthew Island in Alaska. Twenty-nine reindeer were released there in 1944 with no predators. The herd reached about 6,000 by 1963, stripped the island's lichen, and crashed to 42 animals within three years. Overgrazing also lowered the island's carrying capacity, so the population could not simply bounce back.

4. Maximum sustainable yield

Key idea: MSY is taken at K/2, where the logistic curve is steepest; harvesting more than the yearly growth shrinks the stock.

Fisheries and forestry managers use the logistic curve to decide how much they can harvest. A sustainable yield is a harvest equal to the population's yearly growth, so the population stays the same size from year to year.

Because logistic growth adds the most individuals per year at K/2, the maximum sustainable yield (MSY) comes from holding the population at half its carrying capacity. If a cod stock has a carrying capacity of 200,000 metric tons, managers should hold it near 100,000 tons. Harvesting the yearly growth from that level gives the largest catch that can be repeated every year.

Hard questions plug numbers into the logistic growth equation. Sustainable yield = r x N x (K - N) / K, where r is the maximum growth rate and N is the current population. For a fish stock with r = 0.8 per year, K = 50,000 and N = 25,000, the yield is 0.8 x 25,000 x 0.5 = 10,000 fish per year. At K/2 this formula simplifies to r x K / 4, which gives the same 10,000.

MSY is risky in practice. Managers rarely know K exactly, and a bad recruitment year can drop the stock below K/2 while the quota stays the same. Northern cod off Newfoundland collapsed in the early 1990s after years of overestimated stocks, and Canada closed the fishery in 1992.

5. Life history strategies and survivorship curves

Key idea: R-selected species have many cheap offspring and Type III curves; K-selected species have few cared-for offspring and Type I curves.

A life history is the pattern of how an organism grows, reproduces and dies. AP sorts species into two extremes. R-selected species, such as insects, mice, dandelions and many fish, mature early, live short lives and produce many small offspring with little or no parental care. They thrive in disturbed or unpredictable habitats and recover quickly after a crash. They often show boom-and-bust growth, and many become invasive.

K-selected species, such as elephants, whales, great apes and humans, mature late, live long and raise a few large offspring with heavy parental care. Their numbers stay close to carrying capacity in stable habitats. Because they reproduce slowly, they recover slowly from hunting or habitat loss, which makes them more prone to extinction.

Species also differ in how narrow their needs are. A generalist, such as a raccoon or a cockroach, eats many foods and lives in many habitats, so it copes well when a habitat is disturbed. A specialist, such as the giant panda, which eats almost nothing but bamboo, depends on one food or habitat, so it is more prone to extinction when that habitat changes.

Survivorship curves graph how many individuals of a starting group are still alive at each age. A Type I curve stays high and then drops steeply in old age. That is the K-selected pattern, where most young survive. A Type II curve falls in a straight line, because the death risk is about the same at every age, as in many songbirds and lizards. A Type III curve plunges right away and then levels off, because nearly all offspring die young and the few survivors live a long time. Oysters, sea turtles and maple trees fit Type III, which is the r-selected pattern.

The y-axis is usually logarithmic, which is why a constant death rate draws a straight Type II line.

6. Predator-prey cycles

Key idea: Predator and prey populations cycle together, with predator peaks lagging prey peaks because predators need time to reproduce.

Predator and prey populations are linked, so a change in one drives a change in the other. The Lotka-Volterra model describes the loop. When predators are scarce, prey multiply. Plentiful prey feed more predators, so the predator population grows. Many predators then eat prey faster than prey can reproduce, and prey numbers fall. With less food, predators starve or breed less and decline. Fewer predators let the prey recover, and the cycle starts again.

The result is two oscillating curves with the predator peak lagging behind the prey peak. The lag exists because predators need time to turn extra food into extra offspring. The model does not predict a steady equilibrium, and it does not predict that both species crash to extinction. The populations keep cycling around a middle point.

The best-known real example comes from fur-trading records kept by the Hudson's Bay Company in Canada. Pelts sold by trappers show snowshoe hare and Canada lynx numbers rising and falling on a cycle of roughly 10 years, with lynx peaks trailing hare peaks. Later field studies showed that the hare's food supply also drives the cycle, so real systems are messier than the two-species model. On a graph question, find the two peaks, identify which comes first, and explain the lag in terms of food supply and reproduction.

7. Fertility, age structure and population momentum

Key idea: Replacement fertility is about 2.1; a young age structure keeps a population growing for decades after TFR drops, which is population momentum.

Total fertility rate (TFR) is the average number of children a woman would have over her lifetime at current birth rates. Replacement-level fertility is about 2.1, not 2.0. The extra 0.1 covers children who die before they reproduce and the fact that slightly more boys than girls are born. A TFR below 2.1, such as Italy's or Japan's, means each generation is smaller than the one before, so the population eventually shrinks unless immigration fills the gap.

TFR differences explain most of the gap in growth between regions. Sub-Saharan Africa averages around 4 to 5 children per woman, while Western Europe averages around 1.5, with most countries between about 1.3 and 1.7. The causes are social. Fertility falls when girls stay in school longer, when women can get contraception and paid work, when child mortality drops so families need not have extra children, and when people move to cities where children cost more.

An age structure diagram shows the share of males and females in each age group. A wide-based pyramid, like Niger's, means a large young population and fast growth. A column with straight sides means a stable population. A diagram narrower at the bottom than the middle, like Japan's, means the population is aging and will decline.

Population momentum is the reason a wide base matters. Even if every woman in a young country switched to two children tomorrow, the population would keep growing for decades. The huge group of children has not yet reached reproductive age, and when it does it will produce far more births than the small elderly group produces deaths.

8. The demographic transition and IPAT

Key idea: In the demographic transition death rates fall before birth rates, causing a growth surge; IPAT multiplies population, affluence and technology.

The demographic transition model describes how birth and death rates change as a country industrializes. In Stage 1, preindustrial, both rates are high and the population barely grows. In Stage 2, clean water, vaccines and a steadier food supply cut the death rate, but the birth rate stays high, so the population grows fast. In Stage 3, birth rates fall as the country urbanizes, women gain education and children become costly instead of useful farm labor, and growth slows. In Stage 4 both rates are low and the population levels off. Some models add a Stage 5 where births fall below deaths, as in Japan.

The order matters. Death rates fall first and birth rates follow after a lag of a generation or more. That lag is what produces the growth surge. Death rates do not rise during industrialization, and the two rates do not fall together. Many developing countries, such as Nigeria, sit in late Stage 2 or Stage 3 today.

The IPAT equation, proposed by Paul Ehrlich and John Holdren in the early 1970s, connects these numbers to the environment. Impact equals Population x Affluence x Technology. Affluence means consumption per person, and technology means the damage done per unit of consumption. Since the terms multiply, raising one can cancel cuts to the others. Efficiency gains are often partly offset when cheaper use leads people to consume more, which is called the rebound effect. When total use actually rises because of an efficiency gain, the result is called the Jevons paradox. The surest way to lower impact is to lower all three terms together.

Common mistakes

Drawn from the wrong answers students actually pick on these questions.

Thinking that birth rates fall first in the demographic transition, or that birth and death rates fall at the same time.

Death rates fall first, thanks to sanitation, medicine and food security, and birth rates fall a generation or more later. If births fell first the population would shrink, which is not what happened in industrializing countries. The growth surge in Stage 2 exists only because of that lag. Death rates also do not rise temporarily during industrialization.

Calling continuous growth logistic or overshoot because the population is getting large.

Check the percentage change between years. If it stays constant, as with elk rising about 10% each year, the growth is exponential no matter how big the numbers get. Logistic growth needs a falling growth rate as the population nears K. Overshoot needs the population to pass K and then decline, so a data set with no decline cannot show it.

Assuming a TFR of 1.5 will keep a population steady, or make it grow because there are many young people.

Replacement fertility is about 2.1, so 1.5 means each generation is smaller and the population declines in the long run. Momentum from young groups can delay that decline for a while, but it cannot reverse it. Also, slow decline from low fertility is not a boom-and-bust crash. Boom-and-bust is typical of r-selected species, but any population that overshoots its resources can crash, as the St. Matthew Island reindeer did.

Defining population momentum as economic growth, as the push toward carrying capacity, or as death rates falling faster than birth rates.

Population momentum is the continued growth of a population after fertility reaches replacement level, caused by a young age structure. The push toward K is density-dependent regulation. The gap between falling death rates and high birth rates is Stage 2 of the demographic transition. Keep the three ideas separate.

Explaining high growth in Sub-Saharan Africa by land, immigration, or high death rates in Europe.

The main driver is the difference in total fertility rate, about 4 to 5 in Sub-Saharan Africa against about 1.5 in Western Europe. That gap comes from differences in girls' education, access to family planning, urbanization and child mortality. The region sends migrants abroad rather than receiving many, and Europe's death rates are low, not high.

Expecting predators and prey to settle at a constant equilibrium, or to grow until both crash to extinction.

The Lotka-Volterra model predicts ongoing cycles, with the predator peak lagging behind the prey peak. When prey decline, predators decline too, which lets prey recover before they are wiped out. The two populations are tightly linked, so prey do not sit at their own carrying capacity while predators vary on their own.

How this unit shows up on the exam

Expect two kinds of multiple-choice questions. Concept questions ask you to classify. Is this an r- or K-selected trait? Which survivorship curve fits oysters? Is a drought density-dependent? Which demographic stage has a high birth rate and a falling death rate? Data questions show a table, an age structure diagram, a survivorship curve or a predator-prey graph and ask what it shows. For those, read the axes first, check whether the survivorship y-axis is logarithmic, and find which peak comes first in a cycle.

Calculation questions are common. They give crude birth and death rates per 1,000, sometimes with immigration and emigration, and ask for the growth rate, the doubling time or a future population. Answer choices often include the same number as a decimal and as a percent, so check which form the stem asks for. A calculator is allowed, but the numbers usually divide cleanly, so a messy answer is a sign you made a setup error.

On the free-response section, at least one question requires calculations, and population growth and doubling time are frequent topics. Readers award points for a correct setup and a correct answer with units, so write the formula, plug in, and label the result. Other free-response parts ask you to identify a demographic stage from data, explain why a population with replacement fertility keeps growing, or propose a way to lower a country's TFR. For the last, name a specific mechanism, such as expanding girls' secondary education, and explain how it lowers births.

How the exam actually asks it

Real items from the AP Environmental Science bank, easier first. The answer is marked, and every wrong choice is explained — because knowing why a distractor is tempting is most of the work.

Worked example 1Easier
r-selected species and K-selected species represent two extremes of life history strategies. Which of the following characteristics is most typical of an r-selected species?
  1. AShort lifespan, early reproductive maturity, and many offspring with little parental careCorrect
  2. BLarge body size, a stable population near carrying capacity, and strong competitive ability
  3. CSlow growth rate, specialized niche requirements, and high survival rate at all life stages
  4. DLong lifespan, late reproductive maturity, and extensive parental care of few offspring

Why A is right

r-selected species maximize their rate of reproduction (r) by producing many offspring quickly, investing little energy in each individual. They typically have short lifespans, reach reproductive maturity early, and provide minimal parental care. Examples include insects, rodents, and many fish species. This strategy is advantageous in unpredictable or disturbed environments.
Why the other 3 choices miss
B
Incorrect because large body size, population stability near carrying capacity, and strong competitive ability describe K-selected species that invest in survival and competitive dominance.
C
Incorrect because slow growth rates, specialized niches, and high survival rates at all life stages are K-selected traits; r-selected species typically have high mortality rates, especially in early life stages.
D
Incorrect because long lifespan, late reproductive maturity, and extensive parental care are characteristics of K-selected species (such as elephants, whales, and primates), not r-selected species.
Worked example 2Easier
A population of deer has a birth rate of 35 per 1,000 individuals per year and a death rate of 20 per 1,000 individuals per year. What is the annual rate of natural increase (r) for this population?
  1. A0.005 per year
  2. B0.015 per yearCorrect
  3. C0.055 per year
  4. D0.350 per year

Why B is right

The rate of natural increase r = birth rate - death rate = 35/1,000 - 20/1,000 = 15/1,000 = 0.015 per year. This means the population grows by 1.5% each year, excluding the effects of immigration and emigration.
Why the other 3 choices miss
A
Incorrect. This represents a growth rate of 5/1,000, which could result from subtracting incorrectly or using different values.
C
Incorrect. This value (55/1,000) appears to be the sum of the birth and death rates rather than the difference.
D
Incorrect. This is the birth rate alone (35/1,000 = 0.035, not 0.350), not the difference between birth and death rates.
Worked example 3Easier
A fishery biologist determines that a cod population in the North Atlantic has a carrying capacity of 200,000 metric tons. To achieve maximum sustainable yield, the population should be maintained at approximately what level?
  1. A150,000 metric tons
  2. B200,000 metric tons
  3. C50,000 metric tons
  4. D100,000 metric tonsCorrect

Why D is right

Maximum sustainable yield (MSY) is achieved when the population is at K/2, or half the carrying capacity. At 100,000 metric tons (K/2 = 200,000/2), the population has the highest rate of growth and can sustain the largest harvest without declining.
Why the other 3 choices miss
A
Incorrect. At 150,000 metric tons (3K/4), the population is above the optimal level. Growth rate is slower due to density-dependent limitations, yielding less surplus for harvest.
B
Incorrect. At carrying capacity (200,000 metric tons), the population growth rate is essentially zero. No sustainable harvest is possible because the population is not producing surplus.
C
Incorrect. At 50,000 metric tons (K/4), the population is below the optimal level for maximum sustainable yield. While per-capita growth rate is high, total production is less than at K/2.
Worked example 4Easier
A species in which most individuals survive to old age and then experience high mortality is said to exhibit which type of survivorship curve?
  1. AType III, characterized by high juvenile mortality with high survival for those reaching adulthood
  2. BType I, characterized by high survival in early and middle life with increased mortality in old ageCorrect
  3. CType IV, characterized by cyclical mortality rates that vary with population density
  4. DType II, characterized by a constant mortality rate throughout the lifespan

Why B is right

Type I survivorship curves describe species in which most individuals survive through early and middle life, with mortality concentrated in the post-reproductive or old-age period. Examples include humans in developed countries, elephants, and large mammals that invest heavily in parental care.
Why the other 3 choices miss
A
Incorrect because Type III survivorship curves show the opposite pattern — extremely high mortality in early life stages, with survivors having relatively good chances of reaching old age. Examples include oysters, sea turtles, and many fish species.
C
Incorrect because there is no standard Type IV survivorship curve in ecology. The three recognized types (I, II, III) encompass the major patterns of age-specific mortality observed in natural populations.
D
Incorrect because Type II survivorship curves show relatively constant mortality rates throughout the lifespan, not mortality concentrated in old age. Examples include many bird species and some rodents.

Can you do all of these?

Tick what you can do without looking. Anything left unticked is where to go back to.

0 of 10 ticked

Ready to test yourself?

Open practice pulls from the 33 free questions in this unit. The other 188 come with the one-time AP purchase, which unlocks every AP course.

Official topic list

The official course framework breaks this unit into 9 numbered topics.

  1. 3.1Generalist and Specialist Species
  2. 3.2K-Selected r-Selected Species
  3. 3.3Survivorship Curves
  4. 3.4Carrying Capacity
  5. 3.5Population Growth and Resource Availability
  6. 3.6Age Structure Diagrams
  7. 3.7Total Fertility Rate
  8. 3.8Human Population Dynamics
  9. 3.9Demographic Transition

Key terms in Populations

Ordered by how often our reviewed questions test them. Open any term to see the questions that use it.

Calculation51 questionsPopulation growth46 questionsCarrying capacity39 questionsDemographics30 questionsDemographic transition21 questionsLogistic growth20 questionsAge structure19 questionsEnvironmental impact17 questionsTotal fertility rate17 questionsPopulation dynamics16 questionsDoubling time15 questionsPredator prey14 questionsPopulation momentum13 questionsRule of 7013 questionsSurvivorship curves13 questionsCalculations12 questionsMaximum sustainable yield12 questionsBirth rate11 questionsDensity dependent11 questionsExponential growth11 questionsPopulation regulation11 questionsIPAT10 questionsLimiting factors10 questionsOvershoot10 questionsDeath rate8 questionsImmigration8 questionsLife history8 questionsAge structure diagram7 questionsDeveloping countries7 questionsLife history strategies7 questionsPopulation ecology7 questionsPopulation growth rate7 questionsR selection7 questionsAffluence6 questionsDemographic transition model6 questionsDensity independent6 questionsDevelopment6 questionsK selection6 questionsLotka Volterra6 questionsPopulation6 questionsPopulation decline6 questionsReproductive strategies6 questionstype III6 questionsDieback5 questionsFertility rate5 questionsR selected5 questionsTechnology5 questionsDisease4 questionsMortality4 questionsPopulation genetics4 questionsAfrica3 questionsBiotic potential3 questionsContraception3 questionsDependency ratio3 questionsEmigration3 questionsFishery management3 questionsK selected3 questionsLincoln Petersen3 questionsLynx hare3 questionsMark recapture3 questionsPopulation crash3 questionsPopulation cycles3 questionsPopulation estimation3 questionsPopulation oscillations3 questionsPopulation projections3 questionsPopulation pyramid3 questionsRate of increase3 questionsReplacement fertility3 questionsSustainable yield3 questionstype I3 questionstype II3 questionsWildlife management3 questionsWomens education3 questions

The rest of AP Environmental Science

Every unit with its share of the exam. You are on Unit 2.

  1. 1Living World: Ecosystems and Biodiversity15% of exam
  2. 2Populations13% of exam
  3. 3Earth Systems and Resources13% of exam
  4. 4Land and Water Use12% of exam
  5. 5Energy Resources and Consumption12% of exam
  6. 6Atmospheric, Aquatic, and Terrestrial Pollution17% of exam
  7. 7Global Change18% of exam