Skip to content

Unit 2 of 7

Force and Translational Dynamics

20.5% of the exam162 reviewed questions49 key terms16 min read

Force and Translational Dynamics is worth about 20.5% of the AP Physics 1 exam. Our bank tests it with 162 reviewed questions across 49 distinct ideas — 24 easier, 73 medium and 65 harder.

On this page · 12 sections

Every question in this unit asks the same thing in a different costume: given the forces acting on an object, how does its velocity change? Newton's second law supplies the answer, because the net force, found by adding every force as a vector, equals mass times acceleration. A block on a ramp, a passenger in an elevator, two blocks stacked on a frictionless floor and a car rounding a curve are all that single law applied to a new arrangement.

The free-body diagram connects the pieces. You draw each force acting on the chosen object, resolve those forces along sensible axes, and write F_net=ma separately along each axis. This unit is built on five force models: gravity, normal force, tension, friction and spring force. Air resistance also appears, but only qualitatively. Each force model follows its own rule for magnitude and direction. The normal force pushes perpendicular to a surface, tension pulls along a rope, and static friction takes whatever value prevents slipping, up to a maximum.

Two special cases appear constantly. When the acceleration is zero, the forces balance, which covers objects at rest and objects moving at constant velocity. When an object moves in a circle at constant speed, its acceleration points toward the center, so the net force does too. If the speed is changing, only the center-pointing part of the net force equals mv²/r. Circular motion, inclined planes and static friction together generate the largest share of the questions this unit produces.

The unit in a minute

One line per topic. Tap any line for the full notes.

  1. Systems and center of massFind the center of mass as the mass-weighted average position, and remember that only external forces can accelerate it.
  2. Free-body diagrams, net force and Newton's second lawDraw every force, add them as vectors along chosen axes, and set the sum along each axis equal to mass times acceleration.
  3. Equilibrium: at rest or at constant velocityZero acceleration means the forces along each axis sum to zero, and an extended object at rest also needs zero net torque.
  4. Newton's third law and force pairsThird-law partners are equal, opposite, the same type, and act on different objects, so weight and normal force are never a pair.
  5. Normal force, apparent weight and elevatorsApparent weight is the normal force, N=m(g+a) with upward positive, and it depends only on acceleration, never on speed.
  6. Static and kinetic frictionKinetic friction always equals μ_k·N, but static friction is only as large as necessary, with μ_s·N as its ceiling.
  7. Inclines, pulleys and stacked blocksUse the whole system to find the acceleration, then isolate one object to find an internal force such as tension or friction.
  8. Circular motion and centripetal forceIn circular motion, the component of the net force pointing toward the center equals mv²/r, and it is the whole net force only at constant speed, so identify which real forces supply that component at each point.
Grind Force and Translational Dynamics questionsAlready know this? Skip the notes and prove it.

The big ideas

Net force determines acceleration, not velocity

A force changes an object's motion; no force is required to keep motion going. Because F_net=ma connects the vector sum of forces to acceleration, a large net force means a rapid change in velocity, not a high speed. An object can travel quickly with zero net force, and it can be momentarily motionless while a large net force acts, like a ball at the highest point of its flight.

Every force comes from another object

Each force is an interaction between two specific objects, such as Earth pulling on a book or a table pushing up on it. Naming the source object prevents you from inventing imaginary forces like "the force of motion" or a separate "centripetal force." It also hands you Newton's third law automatically, because the source object experiences an equal and opposite push or pull.

Choose the system and the axes before calculating

The same physics looks simple or messy depending on two early decisions. Tilt your axes along a ramp so the acceleration lies along a single axis. Treat two connected blocks as one system when you need the acceleration, then separate them when you need the force between them. This works because internal forces cancel in pairs inside any system you define.

Some forces adjust to the situation

Weight is fixed at mg, but the normal force, tension and static friction are not fixed at all. They take whatever value keeps the object on the surface, the rope taut, or the two surfaces from slipping, so you calculate them from F_net=ma rather than from a formula. Among contact forces, only kinetic friction and the maximum static friction have formulas of their own, μ_k·N and μ_s·N. The normal force, tension and actual static friction must be solved for.

Study notes

8 topics. Each one opens with its key idea, then the detail you need to use it.

1. Systems and center of mass

Key idea: Find the center of mass as the mass-weighted average position, and remember that only external forces can accelerate it.

A system is whatever collection of objects you choose to analyze. Its center of mass is the mass-weighted average position, x_cm=Σm·x/Σm. For a uniform, symmetric object such as a meter stick or a solid ball, the center of mass sits at the geometric center.

Put a 2 kg ball at x=0 and a 6 kg ball at x=4 m. Then x_cm=(2·0+6·4)/8=3 m, which lies closer to the heavier ball. Doubling the mass on one side always pulls the center of mass toward that side.

The center of mass moves as if the system's whole mass sat there and every external force acted on that point, so a_cm=F_net,ext/M. Internal forces come in third-law pairs that cancel, so they cannot change how the center of mass moves. Two skaters at rest on frictionless ice push apart and glide off in opposite directions, but their center of mass stays exactly where it started. Equal forces for equal times give a 60 kg skater half the speed of a 30 kg partner.

2. Free-body diagrams, net force and Newton's second law

Key idea: Draw every force, add them as vectors along chosen axes, and set the sum along each axis equal to mass times acceleration.

Begin every problem by drawing the object as a dot with one arrow for each force acting on it. Each arrow starts at the dot, points in the direction the force acts, and carries a label naming its type: F_g for gravity, F_N for normal, T for tension, f for friction. Never draw velocity or acceleration on the diagram, because neither one is a force.

Next, add the forces as vectors. Choose axes, resolve every angled force into components using sine and cosine, and add the components along each axis separately. A 50 N pull directed 37 degrees above horizontal contributes 40 N horizontally and 30 N vertically. Then write ΣF_x=ma_x and ΣF_y=ma_y and solve.

Near Earth's surface, gravity is simply the object's weight, F_g=mg, and the exam lets you use g≈10 m/s². Farther away, use Newton's universal gravitation, F=Gm₁m₂/r², where doubling the distance between centers reduces the force to one quarter. Here g is the gravitational field strength, about 10 N/kg near Earth's surface, and it also falls off as 1/r² with distance from Earth's center. An ideal spring exerts F=kΔx, proportional to its stretch or compression.

A frictionless surface still exerts a normal force; it simply cannot push parallel to itself. So a 3 kg block on a frictionless floor, pushed horizontally with 12 N, accelerates at exactly 4 m/s² regardless of how the vertical forces balance.

3. Equilibrium: at rest or at constant velocity

Key idea: Zero acceleration means the forces along each axis sum to zero, and an extended object at rest also needs zero net torque.

Newton's first law states that an object keeps its velocity unless a net force acts on it. Zero acceleration therefore means zero net force, whether the object is stationary or cruising in a straight line at constant velocity. A puck gliding at 5 m/s across frictionless ice requires no forward force whatsoever, because the shove that started it ended the moment the stick lost contact.

In equilibrium, the forces along each axis add to zero. Picture an 8 kg lantern supported by two ropes, each angled 60 degrees from vertical. The vertical components of the two tensions must together equal the 80 N weight, so 2T·cos60°=80 N and T=80 N. Each rope carries the lantern's entire weight even though two ropes share the job. Flatten the ropes further and the tension climbs, because only a small fraction of each pull points upward.

For an extended object that can rotate, like a hanging sign or a horizontal beam, static equilibrium requires two separate conditions. The net force must be zero, and the net torque about every axis must also be zero. Balanced forces acting at different points can still make an object spin, which is why a hanging-sign question can test both conditions at once. Torque receives full treatment later in the course.

4. Newton's third law and force pairs

Key idea: Third-law partners are equal, opposite, the same type, and act on different objects, so weight and normal force are never a pair.

When object A pushes on object B, B pushes back on A with a force of equal magnitude, identical type and opposite direction. The two forces act on different objects, so they can never cancel each other. That gives you a reliable test for a third-law pair: swap the object names. The table pushes upward on the book, so the book pushes downward on the table.

The classic trap is a book resting on a table. Its weight and the normal force are equal and opposite, but they are not a third-law pair, because both act on the book and they are different types of force. They match only because the book is not accelerating, which is a second-law result rather than a third-law one. The weight's genuine partner is the book's gravitational pull on Earth.

Pairs remain equal even when the masses involved are very different. In a collision between a 1,000 kg car and a 10,000 kg truck, each vehicle pushes on the other with exactly the same force. The car's acceleration is ten times larger simply because a=F/m. The same reasoning explains walking: your foot pushes backward on the ground, so static friction from the ground pushes you forward.

5. Normal force, apparent weight and elevators

Key idea: Apparent weight is the normal force, N=m(g+a) with upward positive, and it depends only on acceleration, never on speed.

The normal force is a surface pushing outward, perpendicular to itself, and it is not automatically equal to mg. You determine it from Newton's second law applied in the direction perpendicular to the surface.

A bathroom scale displays the normal force it exerts on you, and that reading is your apparent weight. Consider a 60 kg passenger in an elevator, with upward as positive. Newton's second law gives N−mg=ma, so N=m(g+a). If the scale reads 720 N, the acceleration is (720−600)/60=2 m/s² upward. That reading fits two different motions, either rising while speeding up or descending while slowing down, because the scale reveals acceleration rather than the direction of travel.

When the elevator moves at constant speed in either direction, the scale reads 600 N, exactly as it would at rest. When the elevator accelerates downward at 2 m/s², the reading falls to 480 N. In free fall, where the acceleration equals g downward, the reading drops to zero, which is what "weightless" actually means.

Other forces applied at an angle also change the normal force. Pushing down on a box increases it, while pulling upward on the box at an angle decreases it. On a ramp with no other force pressing into or pulling away from the surface, the normal force equals mg·cosθ, which is smaller than mg.

6. Static and kinetic friction

Key idea: Kinetic friction always equals μ_k·N, but static friction is only as large as necessary, with μ_s·N as its ceiling.

Friction acts parallel to the contact surface and opposes slipping between the two surfaces. Kinetic friction operates once the surfaces slide, with a fixed magnitude f_k=μ_k·N. Static friction operates while the surfaces grip, and it takes any value from zero up to a maximum of μ_s·N, matching exactly whatever is needed to prevent slipping.

That phrase "up to" matters enormously. Press a 1.5 kg book against a wall with a 50 N horizontal push, and let μ_s=0.4. The push sets the normal force at 50 N, so static friction could reach 20 N, while the weight is only 15 N. The book therefore stays put, and the friction acting on it equals 15 N, not 20 N, because that is all it needs to supply.

Kinetic friction makes stopping problems quick. A car skidding with locked wheels has friction as its only horizontal force, so ma=μ_k·mg and the deceleration equals μ_k·g, independent of mass. With μ_k=0.5 and an initial speed of 20 m/s, the deceleration is 5 m/s². Applying v²=v₀²−2ad with a final speed of zero gives d=400/10=40 m.

In a laboratory, pulling a block at constant speed makes the applied force equal to kinetic friction. A graph of friction against normal force is then a straight line through the origin, and its slope equals μ_k.

7. Inclines, pulleys and stacked blocks

Key idea: Use the whole system to find the acceleration, then isolate one object to find an internal force such as tension or friction.

On a ramp inclined at angle θ, tilt your axes so the x-axis runs along the slope. Gravity then splits into mg·sinθ directed down the slope and mg·cosθ directed into the surface. The normal force balances the second component, so N=mg·cosθ whenever nothing else presses into the ramp, and on a frictionless ramp the acceleration is g·sinθ.

Now connect a 4 kg block on a frictionless 30-degree ramp to a 3 kg hanging mass over a pulley. The block experiences 20 N down the slope, while the hanging mass pulls with its 30 N weight. Treating both as one system, the net force is 10 N and the total mass is 7 kg, so the acceleration is about 1.4 m/s², with the hanging mass descending. Isolating the hanging mass then gives 30−T=3(1.43), so the tension is about 26 N. Tension is less than the hanging weight precisely because that mass accelerates downward.

Stacked blocks use the same strategy. Place a 2 kg block on an 8 kg block resting on a frictionless floor, with μ_s=0.5 between them, and push the bottom block. Only friction can accelerate the top block, so its maximum acceleration is μ_s·g=5 m/s². The whole 10 kg stack can share that acceleration only if F=(10 kg)(5 m/s²)=50 N, and any larger push makes the top block slip.

8. Circular motion and centripetal force

Key idea: In circular motion, the component of the net force pointing toward the center equals mv²/r, and it is the whole net force only at constant speed, so identify which real forces supply that component at each point.

An object moving in a circle at constant speed is still accelerating, because its direction changes continuously. That acceleration points toward the center with magnitude v²/r, so the net force also points toward the center with magnitude mv²/r. "Centripetal force" describes a job, not a new kind of force, and gravity, tension, normal force or friction performs that job in each situation.

On a flat curve, static friction supplies the inward force. The car begins sliding outward when mv²/r exceeds μ_s·mg, so the maximum speed is v=√(μ_s·g·r), and the mass cancels. With μ_s=0.8 and r=50 m, the maximum speed is 20 m/s. Halving μ_s reduces that speed by a factor of √2, not by a factor of two.

On a frictionless banked curve, the normal force tilts toward the center. Its vertical component balances gravity, N·cosθ=mg, while its horizontal component provides the inward force, N·sinθ=mv²/r. Dividing the second equation by the first gives v=√(rg·tanθ), the single speed that works for every mass.

In a vertical loop, the speed changes, so only the radial component of the net force equals mv²/r. Away from the top and bottom, gravity also has a tangential component that speeds the rider up or slows them down. Take the direction toward the center as positive. At the top, gravity and the normal force both point downward, so N+mg=mv²/r. The minimum speed that maintains contact makes N=0, giving v=√(gr), which is 10 m/s for a 10 m radius. At the bottom, N−mg=mv²/r, so riders feel heavier there.

Common mistakes

Drawn from the wrong answers students actually pick on these questions.

Believing a moving object needs a net force to keep moving, so a sliding puck must still feel the push that launched it, or a force that grows with its speed.

Net force determines acceleration, not speed. Constant velocity means zero acceleration and therefore zero net force. The launching push ends when contact ends, and on frictionless ice nothing else is required to maintain the motion.

Identifying the book's weight, or the friction on the book, as the third-law partner of the normal force from the table.

A third-law partner acts on the other object and is the same type of force. The partner of the table's upward push on the book is the book's downward push on the table, while the weight pairs with the book's gravitational pull on Earth.

Interpreting a high scale reading in an elevator as "moving upward," or expecting constant upward speed to raise the reading.

The scale responds to acceleration alone. Any constant speed, upward or downward, gives N=mg. A reading above mg means upward acceleration, and a reading below mg means downward acceleration, whichever way the elevator happens to be moving.

In the book-pressed-against-a-wall problem, comparing the horizontal push directly with the weight, or claiming that the normal force cancels gravity.

The wall's normal force is horizontal, so it cannot balance a vertical weight. The push determines the normal force, which determines the maximum static friction, so compare μ_s·N with mg to decide whether the book slides.

Stating equilibrium as "the forces add up to the weight," or ignoring torque for an extended object such as a hanging sign.

Equilibrium means the forces sum to zero, because a net force equal to the weight would produce acceleration. For an object that can rotate, the net torque must also be zero, or the object will begin to spin even with balanced forces.

Garbling friction and curve formulas: using g instead of μ_k·g for skid deceleration, using 9.8 when the question specifies 10, writing sinθ where tanθ belongs, or forgetting the square root.

Derive the result from forces instead of recalling it. Skid deceleration is μ_k·g. On a banked curve, dividing N·sinθ=mv²/r by N·cosθ=mg gives tanθ=v²/(rg), so v=√(rg·tanθ). Always use the value of g the question provides.

How this unit shows up on the exam

This unit carries about 20 percent of the AP Physics 1 exam score, tied with Work, Energy, and Power for the largest share. For May 2027, the multiple-choice section contains 42 four-option questions in 85 minutes, roughly two minutes each, so you need set-ups you can execute quickly and reliably.

Multiple-choice stems follow a handful of recurring patterns. Numerical stems ask for a force or acceleration, such as a stopping distance or an elevator scale reading. Symbolic stems ask "Which expression gives the speed…" and offer answers that differ only by a square root or by sine versus tangent. Proportional-reasoning stems change one quantity, such as halving a friction coefficient, and ask what happens to another. Conceptual stems ask which force pairs with which, or what the net force is on an object at constant velocity. Graphical stems ask what a slope represents, such as friction plotted against normal force giving μ_k.

Free-response questions frequently ask for a free-body diagram. Readers expect each force as a separate arrow starting on the object, pointing correctly and labeled by type, with no extra forces and no components drawn in place of the actual force. Derivation parts reward starting from F_net=ma and substituting forces from your diagram, using only the given symbols. Explanation parts reward a connected chain of reasoning that names the specific force responsible: "friction supplies the inward force" earns credit where "the car needs centripetal force" does not. Check limiting cases as well, because a banked-curve answer that depends on mass signals an error.

How the exam actually asks it

Real items from the AP Physics 1 bank, easier first. The answer is marked, and every wrong choice is explained — because knowing why a distractor is tempting is most of the work.

Worked example 1Easier
A hockey puck slides on frictionless ice in a straight line at constant speed. According to Newton's first law, what is the net force on the puck?
  1. AProportional to the puck's speed, since faster motion requires a larger sustaining force
  2. BEqual in magnitude to the puck's weight, directed along the line of motion
  3. CEqual to the original force that set it in motion, which keeps acting as it slides
  4. DZero, since constant velocity requires no net forceCorrect

Why D is right

Newton's first law (law of inertia) states that an object moving at constant velocity has zero net force. The puck moves at constant speed in a straight line, so the net force is zero. The original force is no longer needed once the puck is in motion.
Why the other 3 choices miss
A
Incorrect because net force relates to change in velocity (acceleration), not to speed; constant speed means zero acceleration and zero net force.
B
Incorrect because the weight acts vertically downward and is balanced by the normal force from the ice; the horizontal net force is zero, and weight is not directed along the motion.
C
Incorrect because the original force is no longer applied; on a frictionless surface no force is needed to maintain constant velocity once the puck is moving.
Worked example 2Easier
According to Newton's third law, when a person pushes against a wall with a force of 50 N, the wall pushes back on the person with a force of:
  1. A0 N, because the wall does not move.
  2. B50 N in the opposite direction.Correct
  3. C25 N, because the wall absorbs half the force.
  4. Dmore than 50 N, because the wall is more massive.

Why B is right

Newton's third law states that for every action force there is an equal and opposite reaction force. The wall exerts 50 N on the person in the opposite direction, regardless of whether anything moves.
Why the other 3 choices miss
A
Incorrect. The reaction force exists whether or not the wall moves. Newton's third law applies to all interactions, not just those involving motion.
C
Incorrect. Newton's third law pairs are always equal in magnitude. There is no absorption or reduction of the reaction force.
D
Incorrect. The reaction force is always equal in magnitude to the action force, regardless of the masses of the objects involved.
Worked example 3Easier
A 2 kg block is placed on a frictionless incline that makes a 30-degree angle with the horizontal. What is the acceleration of the block down the incline? (Use g = 10 m/s^2, sin 30 = 0.5.)
  1. A5.0 m/s^2Correct
  2. B2.5 m/s^2
  3. C8.7 m/s^2
  4. D10 m/s^2

Why A is right

On a frictionless incline, the acceleration is a = g*sin(theta) = 10 * sin(30) = 10 * 0.5 = 5.0 m/s^2. The mass cancels out. The result follows from the force relationship given in the problem, so the net force points directly to the correct response.
Why the other 3 choices miss
B
Incorrect. This uses g*sin(theta)/2, incorrectly dividing by an extra factor of 2.
C
Incorrect. This uses g*cos(30) ≈ 10*0.87, confusing the sine and cosine components on an incline.
D
Incorrect. This uses the full gravitational acceleration g, which would only apply to free fall, not motion along an incline.
Worked example 4Medium
A 10 kg sign hangs from two cables attached to the ceiling, each making a 30-degree angle with the vertical. Which condition must be satisfied for the sign to remain in static equilibrium?
  1. ABoth the sum of forces and the sum of torques must equal the weight of the sign.
  2. BThe sum of torques is zero but the net force can be nonzero as long as objects are rigid.
  3. CThe sum of all forces is zero AND the sum of all torques about any axis is zero.Correct
  4. DThe sum of forces is zero but torques do not matter for static objects.

Why C is right

For an object to be in complete static equilibrium, two independent conditions must hold: (1) the net force must be zero (translational equilibrium: sum F = 0), and (2) the net torque about any axis must be zero (rotational equilibrium: sum tau = 0). Both conditions are necessary and sufficient.
Why the other 3 choices miss
A
Incorrect because the sums must equal zero, not the weight; a net force equal to the weight would imply the sign accelerates.
B
Incorrect because a nonzero net force would cause translational (linear) acceleration, violating the static condition even for rigid bodies.
D
Incorrect because torque equilibrium is essential for preventing rotation; a net torque would cause the sign to spin even if forces balance.

Can you do all of these?

Tick what you can do without looking. Anything left unticked is where to go back to.

0 of 10 ticked

Ready to test yourself?

Open practice pulls from the 22 free questions in this unit. The other 140 come with the one-time AP purchase, which unlocks every AP course.

Official topic list

The official course framework breaks this unit into 9 numbered topics.

  1. 2.1Systems and Center of Mass
  2. 2.2Forces and Free-Body Diagrams
  3. 2.3Newton's Third Law
  4. 2.4Newton's First Law
  5. 2.5Newton's Second Law
  6. 2.6Gravitational Force
  7. 2.7Kinetic and Static Friction
  8. 2.8Spring Forces
  9. 2.9Circular Motion

Key terms in Force and Translational Dynamics

Ordered by how often our reviewed questions test them. Open any term to see the questions that use it.

The rest of AP Physics 1

Every unit with its share of the exam. You are on Unit 2.

  1. 1Kinematics12.5% of exam
  2. 2Force and Translational Dynamics20.5% of exam
  3. 3Work, Energy, and Power20.5% of exam
  4. 4Linear Momentum12.5% of exam
  5. 5Torque and Rotational Dynamics; Energy and Momentum of Rotating Systems19% of exam
  6. 6Oscillations6.5% of exam
  7. 7Fluids12.5% of exam