8 topics. Each one opens with its key idea, then the detail you need to use it.
1. Momentum and the impulse-momentum theorem
Key idea: J = F_avg·Δt = Δp. Fix the momentum change, and a longer contact time means a smaller average force.
Momentum is p = mv, measured in kg·m/s. It grows with both mass and speed, so a slow truck and a fast baseball can carry the same momentum. Because velocity has a direction, momentum does too.
Newton's second law can be written as F_net = Δp/Δt. Rearrange it and you get the impulse-momentum theorem: F_avg·Δt = Δp. The left side is impulse, J, measured in N·s, which is the same unit as kg·m/s. Impulse is what a force does to an object's motion over a period of time.
This gives you a way to find average force. Suppose a 0.15 kg baseball arrives at 40 m/s and leaves the bat at 50 m/s the other way. Take the outgoing direction as positive. Then Δp = 0.15(50) − 0.15(−40) = 13.5 kg·m/s. If the contact lasts 0.0010 s, the average force is 13.5 ÷ 0.0010 = 13,500 N.
The theorem also explains safety design. A crash stops a passenger from a fixed speed, so Δp is fixed. An air bag stretches Δt, so F_avg drops. The momentum change is the same; the force is smaller because it acts over a longer time. When a question says the stopping time doubles, you know the average force halves.
2. Impulse from force-time graphs
Key idea: Impulse is the signed area under F vs. t. Check the shape: triangle uses ½bh, rectangle uses bh. On a p vs. t graph, the slope is the net force.
Real forces during a collision are not constant. They rise from zero, peak, and fall back. The exam handles this with a force-time graph, and the rule is simple: impulse equals the area under the curve.
For a triangle-shaped pulse, use one half times base times height. Picture a force that climbs from 0 to 400 N in 0.5 s and then falls back to 0 in another 0.5 s. That is one triangle with a base of 1.0 s and a height of 400 N, so J = ½(1.0)(400) = 200 N·s. The common wrong answers each come from one slip. Treating the shape as a rectangle gives 400 N·s. Using only half the base gives 100 N·s.
Once you have the area, you can find more. Divide impulse by the object's mass to get its change in velocity. Divide impulse by the contact time to get the average force. For the pulse above, F_avg = 200 ÷ 1.0 = 200 N, which is half the peak force, as you would expect for a triangle.
Area below the time axis counts as negative impulse. If a graph dips below zero, subtract that area. The sign tells you the force pushed the object in the negative direction during that stretch.
The exam also flips the picture and gives you a momentum-time graph. Because F_net = Δp/Δt, the slope of a p vs. t graph equals the net external force on the object. A straight rising line means a constant positive net force, and a flat stretch means the net force is zero.
3. Direction reversal and bounces
Key idea: For a reversal, Δp = m(v_f − v_i) with opposite signs, so the magnitudes add. Bouncing means more impulse than sticking.
Bounce problems test whether you treat momentum as a vector. When a ball hits the floor going down and leaves going up, its momentum does not just drop to zero. It goes from one sign to the other.
Take up as positive. A 0.5 kg ball hits the floor at 8 m/s and rebounds at 6 m/s. Before the bounce, p = 0.5(−8) = −4 kg·m/s. After, p = 0.5(+6) = +3 kg·m/s. So Δp = 3 − (−4) = 7 kg·m/s. The magnitudes add because the floor had to stop the downward motion and then start the upward motion. Subtracting the speeds to get 1 kg·m/s is the classic trap.
This leads to a result the exam likes. A ball that bounces back gets a larger impulse than an identical ball that hits and sticks. A perfect bounce at the same speed doubles the momentum change, so it doubles the impulse. If the contact time is the same, the bouncing ball feels the larger average force too. Questions often show a rubber ball and a clay ball of equal mass dropped from the same height and ask which one exerts more force on the floor. The bouncing rubber ball receives the larger impulse, and if the contact times are similar, it also exerts the larger average force.
4. Conservation of momentum and choosing the system
Key idea: Zero net external force means total momentum before equals total momentum after. Choose a system that puts the big forces inside.
Momentum conservation says the total momentum of a system stays constant when the net external force on it is zero. The reason is Newton's third law. When cart A pushes cart B, B pushes A with an equal and opposite force for exactly the same time. The two impulses are equal and opposite, so whatever momentum A loses, B gains.
The skill is choosing the system. Put both colliding objects inside it, and the collision forces become internal and cancel. Gravity and the normal force on a level track cancel each other, so the system is effectively isolated. Friction is external, but a collision lasts only milliseconds. Friction is small compared to the collision force, so momentum just before equals momentum just after.
Set up every problem the same way. Write total momentum before and set it equal to total momentum after: m₁v₁ᵢ + m₂v₂ᵢ = m₁v₁f + m₂v₂f. Put signs on each velocity from your chosen positive direction, then solve.
If you pick only one object as the system, momentum is not conserved for it. The other object exerts an external force on it. This is why one cart's momentum changes in a collision while the two-cart total does not.
In two dimensions, the rule applies to each direction on its own. Total x-momentum is conserved, and total y-momentum is conserved separately.
5. Perfectly inelastic collisions and the ballistic pendulum
Key idea: Sticking means one shared final velocity. For a ballistic pendulum, use momentum for the hit and energy for the swing, never the reverse.
In a perfectly inelastic collision the objects stick and move off together with one shared velocity. That makes the algebra short: m₁v₁ + m₂v₂ = (m₁ + m₂)v_f.
Take a 0.1 kg bullet at 500 m/s that lodges in a 5.0 kg block at rest. Total momentum is 0.1(500) = 50 kg·m/s. The final mass is 5.1 kg, so v_f = 50 ÷ 5.1 ≈ 9.8 m/s. Two wrong answers come up a lot here. One is 50 m/s, which is the momentum value, not a velocity. The other is forgetting to add the bullet's mass to the block's.
Signs matter just as much here. A 3 kg object moving east at 4 m/s hits a 2 kg object moving west at 6 m/s, and they stick. Total momentum is 12 − 12 = 0, so the pair stops.
Same-direction (rear-end) collisions use the same equation with both velocities positive. A 2 kg cart moving right at 6 m/s catches a 1 kg cart moving right at 3 m/s, and they lock together. Total momentum is 12 + 3 = 15 kg·m/s, so v_f = 15 ÷ 3 = 5 m/s to the right. The shared velocity always lands between the two starting velocities.
The ballistic pendulum adds a second stage. The bullet hits a hanging block, and the pair swings up to a height h. You must split this into two steps. Step one is the collision, where momentum is conserved but kinetic energy is not. Step two is the swing, where mechanical energy is conserved, so ½(m+M)v² = (m+M)gh. Using energy conservation across the collision itself gives a wrong answer, because much of the bullet's kinetic energy turns into heat inside the wood.
6. Elastic, inelastic and the kinetic energy test
Key idea: Momentum is always conserved. Check KE to name the collision: same KE is elastic, less KE is inelastic, stuck together is perfectly inelastic.
Momentum is conserved in all three collision types. What separates them is kinetic energy. In an elastic collision total KE after equals total KE before. In an inelastic collision some KE is lost to heat, sound or deformation. In a perfectly inelastic collision the objects stick, and the KE loss is as large as momentum conservation allows.
To classify a collision from data, first check that momentum balances. Then compute ½mv² for each object before and after, and compare the totals. If they match, the collision is elastic. If KE drops, it is inelastic. If KE rises, something released stored energy, such as a spring or an explosion.
The loss can be total. Two identical cars at speed v head straight at each other and stick. Total momentum is mv − mv = 0, so the wreck is at rest and all of the kinetic energy is gone. That is the only way a perfectly inelastic collision loses 100% of its KE: the total momentum must be zero.
A supporting idea, not a required AP Physics 1 formula, is the coefficient of restitution, e, the ratio of separation speed to approach speed. Elastic collisions have e = 1. Sticking collisions have e = 0. Real bouncy collisions fall in between. Steel ball bearings and air-track carts with magnetic bumpers come close to elastic. Clay, putty and Velcro carts are the standard perfectly inelastic examples.
7. Equal masses and velocity exchange
Key idea: Equal masses in a 1D elastic collision trade velocities. If they stick instead, they move off at half speed and lose half the KE.
One elastic case shows up so often that you should know the answer cold. If two equal masses collide head-on and elastically, they swap velocities.
The classic version has a 2 kg ball moving right at 5 m/s that hits an identical 2 kg ball at rest. Afterward the first ball stops and the second moves right at 5 m/s. Check it with both laws. Momentum before is 2(5) = 10, and after it is 2(0) + 2(5) = 10. Kinetic energy before is ½(2)(25) = 25 J, and after it is also 25 J. The two equations have one other solution, where both balls keep their original velocities. That would mean the first ball passed straight through the second, so the swap is the only physical answer. A Newton's cradle works this way, and so does a cue ball that stops dead after a straight hit on another ball.
The swap also works when both objects are moving. If equal masses come in at +3 m/s and −2 m/s, they leave at −2 m/s and +3 m/s.
Unequal masses break the pattern in ways you can predict. A light ball that hits a heavy one at rest bounces backward, so it reverses direction. A heavy ball that hits a light one at rest keeps moving forward, slower than before, and the light ball shoots ahead faster than the heavy ball. Compare this with sticking. Equal masses that stick share the motion, so each moves at half the original speed, and half the KE is lost.
8. Explosions, recoil, rockets and the center of mass
Key idea: Zero momentum in means zero momentum out, so the pieces' momenta add to zero as vectors, and two pieces recoil in opposite directions. The center of mass keeps its velocity through any internal event.
An explosion is a collision run backward. The system starts as one piece, often at rest, and internal forces push the pieces apart. Total momentum stays the same, so if it starts at zero, it ends at zero. That means the momenta of all the pieces must add to zero as vectors. With exactly two pieces, they fly off in opposite directions with equal and opposite momenta. With three or more pieces, no two have to be equal and opposite, because only the vector sum has to be zero.
A 75 kg astronaut at rest throws a 2 kg wrench at 10 m/s. Then 0 = 75v + 2(10), so v = −0.27 m/s. The astronaut drifts backward, and the minus sign is part of the answer. A gun recoiling from a bullet works the same way, and so does a skater pushing off a partner. The lighter object always gets the larger speed. Kinetic energy is not conserved in an explosion; it goes up, because stored chemical or spring energy is released.
A rocket is a nonstop explosion. It throws exhaust backward, so the rocket gains forward momentum. It does not need air to push against.
The center of mass ties all of this together. For objects on a line, x_cm = (m₁x₁ + m₂x₂) ÷ (m₁ + m₂). For a 6 kg and a 2 kg ball on a 4 m rod, place the 6 kg ball at x = 0 to get x_cm = 8 ÷ 8 = 1 m from the heavy ball. The center of mass always sits closer to the heavier mass. Its velocity is v_cm = p_total ÷ m_total. With no external force, v_cm never changes, even while the pieces scatter.